Debian :: Getting Iptables To Run On Boot?
May 30, 2011I don't like this[URL]because every time there is slight change in firewall rules, all that would have to be done again and again
View 3 Replies
ADVERTISEMENT
Debian :: Debian Lenny Iptables Does Not Logs
Mar 29, 2011I have problem with loging, actually iptables logs a data but it seems that for some reasons does not writes in a log file:
Code:
iptables -L -v
Chain INPUT (policy ACCEPT 406 packets, 124K bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT tcp -- any any xxxxxxxxxxx anywhere tcp dpt:xxxx
[Code]....
i checked /var/log/message and /var/log/syslog nothing is here related to iptables. then i create separate file for Iptables by adding this: kern.warning /var/log/iptables.log in my rsyslog.conf it does create iptables.log file inside /var/ but its still empty
General :: Iptables Never Saved And Boot File
Feb 7, 2010The last few times I had to restart my server, my iptables file was never saved and I had to load it from the backup. I always issue /etc/init.d/iptables save after any changes but for some reason it loads the default iptables file that came with the server.Any ideas on what to change?I would also like to use a default boot file that starts or restarts services like squid, nscd, postfix, iptables, etc - where can I edit that?
View 3 Replies View RelatedCentOS 5 Networking :: Adding Iptables -F To Boot?
Sep 5, 2010How I add this " iptables -F " to my Servers boot I already asked this from my Provider, but it seams he forget each time I ask.
View 3 Replies View RelatedFedora Networking :: IPtables Rejects Rules Upon First Boot
Jan 25, 2010I am trying solve a strange problem which ocurred after upgrading many packages including kernel and iptables.This is a Fedora 10 PC acting as a small home-server I've been using over a year without problems. Recently, I've run a yum upgrade and after that, connections outside home wouldn't work. No changes in IPtables (firewall) rules have been done. But connection through local network is working.Symptom is.I've connected to my second PC at home and connected to the server. It works fine on local network. I restart network services (service network restart) and outside connections could be established.I have disabled iptables and ip6tables and after reboots it works fine. But PC is running without firewall.
View 5 Replies View RelatedUbuntu Servers :: Iptables Rules Loading On Boot?
Jun 22, 2010I have a clean install of Ubuntu server Lucid Lynx with the virt-host task installed. I need to find the location of the iptables rules that are being loaded when the system boots. These are the rules for the virbr0 interface.
View 1 Replies View RelatedFedora Servers :: Unable To Restore My Iptables From Iptables-save After Upgrading
Nov 26, 2010I am unable to restore my iptables from iptables-save after upgrading Fedora. I cannot get iptables-restore to work, and I have resorted to entering rules manually using the GUI.
View 2 Replies View RelatedGeneral :: When Restart The Iptables Service Then The Firewall Entries Are Again Shown In Iptables?
Sep 17, 2010I am facing a strange problem witht my iptables as there are some firewall entries stored somewhere which is displaying the below firewall entries even after flushing the iptables & when I restart the iptables service then the firewall entries are again shown in my iptables as shown below,
[root@myhome ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
Debian :: How To Set Iptables With Config
Feb 18, 2015I`d like to block bruteforce attack from china, russia to my mysql and i want to open 3306 mysql port just for one type adress from internet like this:: 212.23.165.xxx, and for others I want to block just for 3306.In my new installaton of weezy I`ve not configured iptables..how should looks like iptables config and how to set iptables with this config?
View 3 Replies View RelatedUbuntu :: Try `iptables -h' Or 'iptables --help' For More Information - ' Not Found.4.4: Host/network `98.200.58.73
Nov 3, 2010I recently installed a new Ubuntu PC that runs iptables and PSAD. I had the same script on another Ubuntu PC, but when I copied the script onto the new PC, I got this error. I don't remember where I found the tutorial for this, all I know is that this is the script (Edited for my usage):
Code:
#!/bin/bash
# Script to check important ports on remote webserver
# Copyright (c) 2009 blogama.org
# This script is licensed under GNU GPL version 2.0 or above
[code]....
Safe.txt contains:
Code:
127.0.0.1
192.168.1.8
192.168.1.1
98.200.58.73
192.168.0.1
And the error message generated is:
Code:
root@NETWORK-SERVER:/var/ddosprotect# ./ipblock.sh
' not found.4.4: host/network `127.0.0.1
Try `iptables -h' or 'iptables --help' for more information.
' not found.4.4: host/network `192.168.1.8
[code]....
Fedora :: IPtables Creates An Error During Startup - Applying Firewall Rules: Iptables-restore: Line 21 Failed
Jul 17, 2010IPtables creates an error during startup as well as when I try to restart it: Here's the output of:
[Code]....
Debian :: Iptables Log UDP Flood Under 64 Packages?
Jan 22, 2011how to do iptables log to file UDP Flood under 64 packages?
View 14 Replies View RelatedDebian :: Iptables Cannot Save The Configuration?
Apr 28, 2011I am configuring the iptables in the debain squeeze and then running the: iptables-save
View 4 Replies View RelatedDebian Configuration :: Bad Argument '#' In Iptables
Jul 11, 2011I follow this instructions but after iptables-restore < /etc/iptables.test.rules I see this error # iptables-restore < /etc/iptables.test.rules Bad argument `#' Error occurred at line: 3 Try `iptables-restore -h' or 'iptables-restore --help' for more information. The line 3 is the same as the link - # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0
View 3 Replies View RelatedUbuntu Servers :: Setup Iptables Rules In /etc/if-up.d/iptables?
Apr 16, 2011I am running Ubuntu server 10.10 and trying to setup iptables rules in /etc/if-up.d/iptables
Quote:
root@host# cat /etc/network/if-up.d/iptables
#!/bin/sh -e
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
Problem is that iptables doesn't get updated and I don't see them when iptables -L is executed after reboot.
CentOS 5 :: Custom Iptables: Remove The Existing Iptables First?
Apr 28, 2009To expand: I'm trying to set up a box with l7-filter, and I need to patch and compile iptables 1.4.1.1 as part of the process. I ./configured it with the prefix= argument so it would install into /sbin instead of /usr/sbin, and I did a yum remove iptables before installing it so as not to get in the way of the original iptables, but I'm wondering if this is really necessary - it's kind of annoying, because removing the original iptables removes the init.d script, deregisters the service, etc. If I don't, is it possible that iptables 1.4.1.1 might get overwritten in a system update or something, or will yum see that I've got a custom/newer version in there and leave it be?
View 4 Replies View RelatedDebian :: Iptables - Netfilter Queue Handling
Jul 17, 2015I have created a nfq handler via nfq_open() and using the returned qhandle to bind my application program to a specific queue number that is configured in iptables. when i invoke nfq_create_queue() my program is stuck there and the back trace shows it is blocked in recvfrom()
bt
in recvfrom () from /lib/x86_64-linux-gnu/libpthread.so.0
in nfnl_recv () from /usr/lib/libnfnetlink.so.0
in nfnl_catch () from /usr/lib/libnfnetlink.so.0
Debian Installation :: How To Install Netfilter / Iptables
Apr 5, 2011How to install netfilter/iptables ? debian6
View 1 Replies View RelatedDebian Configuration :: Iptables Forwarding For Tomcat?
Nov 10, 2010I've been trying to forward some ports using iptables for some time now, but still haven't figured out how to get it to work..What i'm trying to accomplish is to forward all traffic from port 80 to port 8080, and all traffic from port 443 to port 8443, this because i would like to run tomcat as a non-root user, and the original ports can only be used as root.. I've currently setup my iptables like this:
# Generated by iptables-save v1.4.2 on Wed Nov 10 16:44:45 2010
*nat
:PREROUTING ACCEPT [39350:6120333]
[code].....
Debian Configuration :: Iptables Blocks FTP Connections
Jul 8, 2011For some reason my FTP packets are blocked by iptables even though I thought I allowed them through
My syslog errors are along this line:
And my iptables ruleset:
Debian :: How To Use IPtables - Basic Firewall Setup
May 16, 2010Recently I have been working on iptables and trying to understand how to use it. Here's a little script I have written to setup a basic firewall for myself:
Code:
#!/bin/bash
if [ `id -u` -ne 0 ]; then
echo "You need root privilege"
exit 1
fi
PROG=/sbin/iptables
$PROG -F
function sethttp {
echo "Opening http port..."
$PROG -A INPUT -p tcp --dport 80 -j ACCEPT
}
function sethttps {
echo "Opening https port..."
$PROG -A INPUT -p tcp --dport 443 -j ACCEPT
}
function settorrent {
echo "Opening torrent port..."
$PROG -A INPUT -p tcp --dport 52413 -j ACCEPT
}
while getopts "hst" option; do
case "$option" in
h) sethttp;;
s) sethttps;;
t) settorrent;;
*) echo "DOH!"
esac
done
$PROG -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$PROG -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$PROG -A INPUT -i lo -j ACCEPT
$PROG -A OUTPUT -o lo -j ACCEPT
$PROG -A INPUT -j DROP
$PROG -A FORWARD -j REJECT
echo "Done setting up the firewall! Enjoy :)"
exit 0
OK, this can take 3 arguments that open ports 80, 443 and 52413. And at the end, some default rules are applied. But here's the thing I don't understand:
if I don't give the argument for port 80, I can still view web pages... and also, when I remove the line:
Code:
$PROG -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
Whether I say it to open port 80 or not, I can't view any web pages.
Networking :: Iptables Configuration On Debian Dmz Host?
Jul 6, 2010I am trying to set up a DMZ host - that is, one multifunctional PC between the WAN and the LAN. I've started with a basic router, and expanding upon that as the need arises. I am currently trying to gain access (from the WAN) to a website hosted on one of the servers in the LAN, but I am having trouble accessing the host from the WAN; I think my iptables configuration may be too restrictive. On the DMZ host, I'm using Debian (Etch). I have setup dhcp3-server, a script to configure iptables and pound (reverse-proxy). The (virtual) machine has 4 network cards: eth0, eth1, eth2, eth3; eth0 is the WAN, eth1 through eth3 serve 3 different virtual LANs.
All machines in the LAN (except one windows 2008 server - I might want to address that problem later) get their IP adresses correctly via dhcp from the DMZ host. All machines on the LAN can access the internet (including the 2008 server if I configure it manually) as they should. If I access http://localhost on the DMZ host, pound reports "The service is not available. Please try again later." - as it should.
I can ping the DMZ host from the WAN on 10.0.0.79 However, if I try to access the DMZ host from the WAN (http://10.0.0.79) I get "Unable to connect" from firefox. I'm sure this is not a pound problem, so I think it's in the iptables, or maybe I should be installing some extra software that I'm unaware of.
[code]....
Debian :: Written A Simple Script For Iptables (rc.firewall)?
May 16, 2011this is my first post and I'm a newbie with debian.I have written a simple script for iptables (rc.firewall)
#!/bin/sh
### BEGIN INIT INFO
# Provides: Script Firewall for IP-tables
[code]....
Debian Configuration :: IPTables Output Block Not Local
Sep 19, 2015I try to create some rules to detect an outgoing traffic from my debian jessie that is not from my IP or loop.
#!/bin/bash
/sbin/iptables -N C_OUT_N_LOCAL
/sbin/iptables -N C_OUT_N_LOCAL_LO
/sbin/iptables -A C_OUT_N_LOCAL -m limit --limit 2/min -j LOG --log-prefix "PK: output not local : " --log-level 4
LO_IP="127.0.0.1"
MY_IP="192.168.0.4"
/sbin/iptables -I OUTPUT -p ALL ! -s $LO_IP -j C_OUT_N_LOCAL_LO
/sbin/iptables -A C_OUT_N_LOCAL_LO -p ALL ! -s $MY_IP -j C_OUT_N_LOCAL
Debian Configuration :: Lenny Not Loading Iptables Rules
Dec 30, 2010I'm having some trouble with the configuration of the iptables. I want to setup a network server to serve as Fail Over (for my 2 ISPs), DHCP and DNS. I have 3 network cards, 2 connected to ISP's routers and 1 that serves as UPLINK for my switch.
I want to add some Iptables rules so I can achieve what I want to do. The problem is that the rules I try to use, they have to effect.... they don't load, here are the rules I am trying to add:
#iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j SNAT --to EXTIP
When I try to check to see if it loads, with the command:
#iptables -L
It returns empty
Server :: Debian 5.0.6 Iptables Modules Installation - VMware
Mar 2, 2011I use Debian 5.0.6 32-bit through VMware workstation installed on my Windows Server 2003. I just simply installed it from CD-1 and I use Directadmin on that.
I need a lot of iptables commands for blocking but I keep getting missing module errors on that one, I did lsmod | grep -i iptables to see there are no modules. It should have been installed by the disc image but I don't know why it didn't. So I now want to know how to get those modules required by iptables.
Debian :: How To Install Iptables-persistent As Loadable Kernel Module
Nov 10, 2015I'm working on my iptables rules on a debian 8 vps and I tried to install iptables-persistent but I was told "Unable to locate package"...
Where can I get this so that I may save my rules for reboot?
Debian Configuration :: OpenVPN And IPTables - No Local Hostnames Accessible
Feb 7, 2016I managed to set up an openvpn server, ip-forwarding and a nat iptable rule for that.
Almost everything works as expected, but my problem is:
Smartphone -> VPN -> Internet ==> works (by ip and hostname)
Smartphone -> VPN -> machine in my local network by IP ==> works
Smartphone -> VPN -> machine in my local network by its hostname => DOES NOT WORK
Machine w/ VPN server -> ping to machine in local network by ip or hostname => works
So, i wonder why i cant access a local machine through the vpn by its hostname. I guess I'm missing a forwarding rule??
iptables dump:
# Generated by iptables-save v1.4.21 on Sun Feb 7 20:56:52 2016
*nat
:PREROUTING ACCEPT [786:59064]
:INPUT ACCEPT [728:53047]
:OUTPUT ACCEPT [19:1487]
:POSTROUTING ACCEPT [20:1576]
-A POSTROUTING -s 10.8.0.0/24 -j MASQUERADE
COMMIT
# Completed on Sun Feb 7 20:56:52 2016
Debian Configuration :: IPTABLES Protocol To Reject All Incoming Ssh Traffic
Apr 4, 2010a good IPTABLES protocol to reject all incoming ssh trafiic except for a single IP or IP range?
View 4 Replies View RelatedDebian Configuration :: Setting IPTables Default Forward Policy?
May 3, 2010I'm intending to replace my current router (486DX2 w/16MB running FREESCO which has been faithfully working 24/7 for well over a decade) with a debian box with a bit more grunt and newer features. I'm currently setting up my iptables ruleset and am after a bit of advice re the FORWARD policy. A few example rulesets I have found set the default policy to DROP and the have two lines for each port forward, one to allow the traffic and one to direct the incoming packets to the correct machine.
iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 25 -j DNAT --to-destination 10.0.100.10:25
iptables -A FORWARD -i eth1 -p tcp --dport 25 -o eth0 -d 10.0.100.10 -m conntrack --ctstate NEW -j ACCEPT
I'm thinking of setting the default policy to ACCEPT to cut down on typing as my default INPUT policy is DROP and unless there is a valid FORWARD rule for a particular port, the packets aren't going anywhere anyway. Or have I misunderstood something. My googling returned heaps of example scripts & not much intelligent commentary. Alternatively, what do you all use to configure & maintain your debian gateways; hand rolled iptables rules, or any toolset recommendations?