Fedora Networking :: IPtables Rejects Rules Upon First Boot
Jan 25, 2010
I am trying solve a strange problem which ocurred after upgrading many packages including kernel and iptables.This is a Fedora 10 PC acting as a small home-server I've been using over a year without problems. Recently, I've run a yum upgrade and after that, connections outside home wouldn't work. No changes in IPtables (firewall) rules have been done. But connection through local network is working.Symptom is.I've connected to my second PC at home and connected to the server. It works fine on local network. I restart network services (service network restart) and outside connections could be established.I have disabled iptables and ip6tables and after reboots it works fine. But PC is running without firewall.
View 5 Replies
ADVERTISEMENT
Aug 15, 2011
I'm trying to build a firewall with IPTables: INTERNET <--------> (eth0) FIREWALL (eth1) <------------->FTP_srvI set all rules DROP by default.My rules for forwarding packet to FTP server:
#iptables -t nat -A PREROUTING -i eth1 -d $FIREWALL_EX_ADDR -p tcp --dport 21 -j DNAT --to-destination $FTP_ADDR:21
#iptables -A FORWARD -i eth0 -o eth1 -p tcp --dport 21 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
[code]....
View 2 Replies
View Related
Jul 17, 2010
IPtables creates an error during startup as well as when I try to restart it: Here's the output of:
[Code]....
View 11 Replies
View Related
Jun 22, 2010
I have a clean install of Ubuntu server Lucid Lynx with the virt-host task installed. I need to find the location of the iptables rules that are being loaded when the system boots. These are the rules for the virbr0 interface.
View 1 Replies
View Related
May 22, 2011
I added a few rules to my /etc/iptables.rules file and then used sudo iptables-restore < /etc/iptables.rules but i got an error saying "iptables-restore: line 29 failed".But the only word on that line.
View 1 Replies
View Related
Mar 10, 2011
I need with some iptables rules. I've done all I can, Googling all over, to cover as many exploits as possible and the following script is what I've come up with. The current set up works and I've checked with NMAP. I just need some sort of confirmation that this is pretty much what I can do.
Code:
LAN="eth0 eth1"
RANGE=10.1.0.0/17
WAN=eth2
# Delete all existing rules
[code]....
Also, if I wanted a broadcast to be relayed to all subnets within a defined range, how would such a iptables rule look like? I need this in order to find a networked Canon MP640 printer.
View 1 Replies
View Related
Apr 7, 2010
I just install 1 firewall using Iptables.
Firewall includes 2 NIC:
NIC1 <IP PUBLIC>
NIC2 192.168.10.1
I installed 1 web server IP: 192.168.10.2
I have some PC IP range: 192.168.10.10->20
I set rules NAT on firewall and PC & web server can connect internet good, but I have problems:
When PC access to web server with IP 192.168.10.2 that ok, but PC can't access to web server when using IP Public. But outside internet, I can access to web server using IP Public.
Rules on IPTables
Code:
# Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*nat
:PREROUTING ACCEPT [950:126970]
:POSTROUTING ACCEPT [89:5880]
:OUTPUT ACCEPT [19:1342]
-A PREROUTING -d 209.99.242.124 -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.10.2:80
-A POSTROUTING -s 192.168.10.0/24 -o eth0 -j SNAT --to-source 209.99.242.124
*filter
:INPUT DROP [1599:157409]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [232:34452]
-A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i eth1 -o eth0 -j ACCEPT
-A FORWARD -i eth0 -o eth1 -d 192.168.10.2 -p tcp --dport 80 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o eth1 -j ACCEPT
COMMIT
View 2 Replies
View Related
Jul 20, 2010
How do I get ufw to refresh firewall rules after accidentally running iptables -F
View 3 Replies
View Related
Jan 26, 2010
Does anyone have tips about iptables rules for filtering network traffice?
View 2 Replies
View Related
Mar 13, 2011
I'm trying to configure NFS sharing behind a firewall, I got it to work and all but I was caught by something that (to me anyways) seems odd.I've been able to mount the export on another computer and am transferring files over as we speak, but I'm just interested in knowing why the RELATED,ESTABLISHED rule seems to be catching almost all the traffic coming from the other node. Any ideas? Should I be concerned that my firewall isn't protecting anything or something?
View 1 Replies
View Related
May 19, 2011
Whenever I add a rule to iptables, all of the policy counters reset. The counters for each individual rule remain intact, however, the main counter resets. Here's what I mean:
Code:
[root] ~ # iptables -vL
Chain INPUT (policy ACCEPT 65M packets, 83G bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 50M packets, 30G bytes)
pkts bytes target prot opt in out source destination .....
View 2 Replies
View Related
Jun 18, 2010
The following is my setup. wireless server (ip of this server is 192.168.1.1) -- target board ( wireless client [ip of this is got for wireless server is 192.168.1.3 ] , bridge (192.168.36.1) )-- linux pc ( 192.168.36.3) as show above i have target board for that i have a wireless interface and a linux pc is connected to target board.now the ips are like this for linux pc 192.168.36.3 and my target board bridge ip s 192.168.36.1
my wireless interface got ip from another server like 192.168.1.3 ,now if i do ping on my target board for 192.168.1.1 it goes through wireless interface to the 192.168.1.1 wireless server.but when i do the same from target board connected linux pc its not pinging from linux pc i could able to ping to 192.168.1.3 but not 192.168.1.1 .I think i need to write a iptable rule properly on my target board to forward the 192.168.1.* packtes to wireless interface.
View 14 Replies
View Related
Jul 2, 2010
I two servers set up: 192.168.1.150 and 192.168.1.160 Initially, I want all traffic to be served by server 150. So for this purpose I am leaving the IPTables on .150 empty. At a point in time, I want to forward all incoming traffic to be served by .160 instead. I have accomplished this using these commands (on .150):
iptables -t nat -A PREROUTING -j DNAT --to 192.168.1.160
iptables -t nat -I POSTROUTING -j MASQUERADE
My problem is that if I have an open SSH connection to .150 (prior to adding the rules), the packets are still handled by .150 after adding the rules.. e.g. my SSH session stays active. I want these packets to be forwarded to .160, which would effectively disconnect the SSH session. I do not want the packets flat out dropped, I just want them forwarded on in whatever state they are in. If I try a new SSH session, it is properly forwarded to .160
View 5 Replies
View Related
Oct 24, 2010
I have set up a master DNS server at 192.168.50.9 and a slave DNS at 192.168.50.6. Both servers are BIND9.Machines are for testing/experimenting, hence the IP addresses. Initially, the zone transfer was blocked by the firewall on the master, as the slave uses randomly selected non-privileged ports for zone-transfer query. So, as far as I understand, there are two possible approaches:
1. Allow connections based on source, which should be
Code:
-A RH-Firewall-1-INPUT -p tcp -m state --state NEW,ESTABLISHED -s 192.168.50.6 --sport 1024:65535 --dport 53 -j ACCEPT
(and it works for me fine)
2. Allow ESTABLISHED and RELATED connections, which would be something like
Code:
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
which was my initial idea but didn't work, but has inspired me to dig deeper into firewall configuration topics :).
Question: Does zone change notification message count for opening a dialog, or notification from master and slave zone update request are two absolutely separate actions? If the latter is true, that, of course, explains why option #2 didn't work.
View 2 Replies
View Related
Sep 23, 2010
I'm trying to configure Iptables and I just want to block everything but http/https. However, my connection is pppoe, so I have the ppp0 interface. Pretty much every Iptables tutorial that I found don't teach how to deal with this kind of setup. I'm forwarding the ppp0 to eth0 and I could configure the input rules and they're working. After this, I need to configure the output but nothing seems to work.
The current working rules are:
Code:
Chain INPUT (policy ACCEPT 7858 packets, 5792K bytes)
pkts bytes target prot opt in out source destination
299 201K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:www
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https
11 820 DROP all -- any any anywhere anywhere
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- eth0 ppp0 anywhere anywhere
0 0 ACCEPT all -- ppp0 eth0 anywhere anywhere state RELATED,ESTABLISHED
Chain OUTPUT (policy ACCEPT 10791 packets, 1951K bytes)
pkts bytes target prot opt in out source destination
I don't understand what those "state RELATED,ESTABLISHED" rules do. Also, I don't know if this rules are secure, because i'm very confused about the ppp0/eth0 interfaces.
View 1 Replies
View Related
May 3, 2009
When I use system-config-firewall, it asks what interfaces to trust. Where does it store that information for iptables (or whatever uses that info)? How iptables knows at what interfaces to use the rules?There is not that kind of information in /etc/sysconf/iptables and iptables-config.
View 2 Replies
View Related
Apr 16, 2011
I am running Ubuntu server 10.10 and trying to setup iptables rules in /etc/if-up.d/iptables
Quote:
root@host# cat /etc/network/if-up.d/iptables
#!/bin/sh -e
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
Problem is that iptables doesn't get updated and I don't see them when iptables -L is executed after reboot.
View 2 Replies
View Related
Dec 22, 2010
I am using a kernel of version 2.6.32 . I installed iptables of version 1.4.2 and it got installed successfully.
but while adding some rule to the iptable i faced an error like the following
iptables v1.4.2: Couldn't load target `standard':/usr/local//libexec/xtables/libipt_standard.so: cannot open shared object file: No such file or directory
i basically want to add a rule like the following
iptables -A INPUT -p icmp -j QUEUE
one more thing i would like to add post is tat
i did not find a library called libipt_standard.so in iptables folder(/usr/local/libexec/xtables)
instead i found a library libxt_standard.so
i tried renaming libxt_standard.so to libipt_standard.so
but even then i found the same error.
View 4 Replies
View Related
Sep 9, 2010
can i actually edit /etc/sysconfig/iptables and create/delete rules inside that file?will it work? i just find using the IPTABLES -A or -D command a hassle
View 3 Replies
View Related
Jan 8, 2010
I am booting centos 5.4 on machine. The system hangs at line "Applying iptables firewall rules".Is there any way to skip starting iptables service during boot or disable it during boot so the system finally reboots.
View 1 Replies
View Related
Sep 16, 2010
I am trying to program iptable rules for implementing a 1:1 NAT which does the following:
1. Forward all traffic from all ports on a public ip to a private ip
2. Forward traffic from a range of ports (x-->y) on a public ip, to a private ip
I did some google searches for the same, and came up with the following.
iptables -A FORWARD -t filter -o eth0 -m state
state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -t filter -i eth0 -m state
state ESTABLISHED,RELATED -j ACCEPT
View 15 Replies
View Related
Mar 31, 2011
Can someone please let me know strong iptables rules? Below entries are in iptables file.Here Y.Y.Y.Y is another branch public IP.This server acts as gateway+squid server.Further it will serve company's intranet page also using httpd.OS is CentOS 5.0.
View 1 Replies
View Related
Jan 27, 2011
I am setting my firewall rules using the command iptables.My question is i wanna know what command i can use that list rule 2 and 3 for instance in my table?i want to create rule that: The host is administered using SSH, scp and sftp so allow incoming SSH traffic and securing remote file copying and transferring.
View 2 Replies
View Related
Jul 9, 2011
what do the following two commands do? Do they modify the iptables rules in any way?
sudo /sbin/iptables -L -n
sudo /sbin/ip6tables -L -n
View 5 Replies
View Related
Aug 25, 2010
I put together the following filter set :
Code:
#!/bin/sh
#To understand this script, reference the No Starch Press Linux Firewalls Book.
MODPROBE=/sbin/modprobe
IPT=/sbin/iptables
IPTSV=/sbin/iptables-save
IPT6=/sbin/ip6tables
IPT6SV=/sbin/ip6tables-save
### flush / drop policy sets
echo "[+] Flushing existing rules with DEFAULT of DROP [+]"
echo "[+] IPv4 [+]"
$IPT -F
$IPT -F -t nat
$IPT -X
$IPT -P INPUT DROP
$IPT -P OUTPUT DROP
$IPT -P FORWARD DROP
echo "[+] IPv6 [+]"
$IPT6 -F
$IPT6 -F -t nat
$IPT6 -X
$IPT6 -P INPUT DROP
$IPT6 -P OUTPUT DROP
$IPT6 -P FORWARD DROP .....
###OUTPUT rules: LOG rule
$IPT -A OUTPUT -o ! lo -j LOG --log-prefix "DROPED OUTBOUND" --log-ip-options --log-tcp-options
I wanted to know how to allow certain applications through the outbound tables. For example, I wish to be able to use tools such as nmap,tracepath, and traceroute. However, I am not sure where to look to understand the ports to open. I was starting to think that maybe rather than ports to open it would need to be somehthing like tcp flags that would ned to be allowed. Any way, I have tried google and am still haing problems. I started wanting to use these tools due to getting ready for my network+ and security+ certs.
View 2 Replies
View Related
Jul 11, 2010
so the firewall rules I am currently using are displayed below.
Code:
# DROP ALL FORWARDED PACKETS
iptables -P FORWARD DROP # DROP ALL PACKETS
# ALLOW DHCP THROUGH THE FIREWALL
[code]....
View 6 Replies
View Related
Jul 19, 2010
I have been trying to figure out how to makes rules in iptables that expire after a certain amount of time. From what I have found online you want to use the recent module with --rcheck and --seconds. I have found a few examples and have given them a shot but I can't seem to get it right. Would anyone mind posting an example of a rule that will auto expire?
View 3 Replies
View Related
Feb 20, 2010
I've configured squid proxy server in a P4 desktop. I've 50 users in my network. I installed RHEL 4.4 (2.6.9-42 kernel) and the iptables version is 1.2.11-3.1. I've 2 NICs installed in the system. eth0 (192.168.100.99) for local lan and eth1 (192.168.1.2) for outgoing to internet. I've connected DSL broadband modem to eth1 (default ip of DSL modem is 192.168.1.1). All the clients except few has been forced to go through squid by user authentication to access internet. Those clients which were kept away from proxy are 192.168.100.253, 192.168.100.97, 192.168.100.95 and 192.168.100.165. Everything works fine but from last week I observed that one of some notorious user use the direct IPs (192.168.100.97 or 192.168.100.95) in the absense of the owner of these IPs to gain access to internet as we applied download/upload restrictions in squid.
I want to filter the packets of source hosts using MAC address in PREROUTING chain. I read somewhere that IPT_MAC module must be installed to make this happen. So that those notorious users can not change their ips to gain direct access to internet.
Below are the contents of my iptables file (I've ommited few entries for safty purpose).
# Generated by iptables-save v1.2.11 on Wed Nov 25 16:35:57 2009
*filter
:INPUT ACCEPT [14274:3846787]
:FORWARD ACCEPT [4460:1241297]
:OUTPUT ACCEPT [16825:4872475]
code....
View 9 Replies
View Related
Aug 23, 2010
I was wondering if there is a way to find out IP blocks based on a given region. I know there are IP Lookups that will tell you what Country and possibly City a given IP is from. What I want is the following:
- I would like to set up a IPTABLES rule that implements something like:
=> ALLOW VPN connections FROM THIS ISP/IP BLOCKS THAT ARE IN CITY XYZ
Basically, I want to limit my incoming VPN connections FROM my ISP in the surrounding area. So, for example, I can go to my friends house who also has the same ISP. I should be able to connect from his home to mine because we have 1) same ISP 2) IP blocks is confined to a particular local location.
View 1 Replies
View Related
Dec 30, 2010
I'm having some trouble with the configuration of the iptables. I want to setup a network server to serve as Fail Over (for my 2 ISPs), DHCP and DNS. I have 3 network cards, 2 connected to ISP's routers and 1 that serves as UPLINK for my switch.
I want to add some Iptables rules so I can achieve what I want to do. The problem is that the rules I try to use, they have to effect.... they don't load, here are the rules I am trying to add:
#iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j SNAT --to EXTIP
When I try to check to see if it loads, with the command:
#iptables -L
It returns empty
View 2 Replies
View Related
