Debian :: Colord-sane Segfault During Boot

Sep 6, 2015

I just saw this message in the syslog and wondered if it could have anything to do with my previous problems with LXDE crashing:

Code: Select allSepĀ  6 08:03:34 MyComputer kernel: [ 1003.788502] colord-sane[3381]: segfault at 21 ip b4de95ba sp b5609fb8 error 6 in[b4dbe000+4a000]

I have read a number of bug reports regarding this issue and it appears to go back about two years. It was supposedly fixed but that does not appear to be the case unless there is something peculiar with my Wheezy 7.8 installation.I just found this on a Ubuntu bug report. It is related to a colord-sane but not necessarily exactly the same as what I am experiencing.This is a libsane bug, not a colord bug. If you want to to work around it, change /etc/colord.conf to have UseSANE=false

View 2 Replies


OpenSUSE Hardware :: Scanadf (part Of Sane-frontends) / Rpm Of Sane-frontends?

May 22, 2011

Does anybody know where to find an rpm of sane-frontends?I want to use my auto-document-feed functionality on my scanner using scanadf, which is part of sane-frontends.Otherwise I'd also welcome alternative suggestions for scanadf.

I'm running Suse 11.2 and using a Brother DCP7065DN scanner/printer, which actually comes with stunning drivers and support for Linux.

View 2 Replies View Related

Debian :: Sane - Share Epson Scanner Over Network

Apr 29, 2010

I have a debian server (squeezzy) amd 64, running with an epson BX-300f pluged to USB. And I want to share the scanner over my network. So let's do that, Intalled sane, sane utils, iscan, which I've downloaded from epson drivers and wich include epkowa drivers fro scanner to work..
after that I installed on my system (Ubuntu 9.10) xsane... on console I type:

root@bruno-laptop:/home/bruno# scanimage -L
*** glibc detected *** scanimage: free(): invalid pointer: 0x00be63d0 ***
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device 'v4l:/dev/video0' is a Noname HP Webcam virtual device
device 'net:' is a unknown manufacturer unknown device -- use override to select flatbed scanner
device 'net:' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
device 'net:' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner

I don't know why I find so much things, if i only have one scanner. Then I opened xsane and found the scanner over network. I chose the epson with epkowa drivers I try to scan something but it dont output nothing and sometimes it gives me "end of file reached". I can put whatever config files here if you want to, just ask. One time it worked fine.. but only half of an image...

View 1 Replies View Related

Debian Hardware :: Sane Scanner Only Detected By Root

Dec 6, 2010

I added myself to the scanner and saned groups, however scanimage -L only detects the device when run as superuser. I think this may be related to [URL].

root@icecream:/home/discord# scanimage -L
device 'epson2:/dev/sg0' is a Epson GT-9800 flatbed scanner
discord@icecream:~$ scanimage -L

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 1 Replies View Related

Debian Hardware :: SANE Not Working After Upgrading To Squeeze?

Sep 6, 2011

My setup is an HP OfficeJet 4315 All-in-one on a Debian box with the clients using XSANE on Windows boxes.

After upgrading to Squeeze, none of the clients could see the scanner.root could see the scanner from the Debian box.non-root users could not see the scanner from the Debian box.

Obviously, something was wrong with the permissions. After a lot of digging, I found that the /dev entry for the 4315 was owned by root.lp with no world write access.

My solution was to add the saned account to the lp group. I figured that was the most security-conscious way to fix it.

The remote clients can now see the scanner, so everyone is happy.

This may not work for every installation, but for all-in-ones, it probably will.

View 1 Replies View Related

Software :: Segfault On Boot - Attempting To Enable Nvidia Driver

Apr 5, 2010

Segfault during boot of nvidia drivers, anyone know what's causing it? Boot log is here: [URL] It cites a segfault in my /etc/rc.d/init.d/functions at ine 513.

View 2 Replies View Related

Ubuntu Servers :: Grep Gzip Segfault - Not Boot Apart From In Read-only Mode

Mar 28, 2010

I have an interesting issue Ubuntu Server 8.04, The server has been running for quite a while (not designed or put together by me) but recently it has started segfualting and now will not boot apart from in read-only mode. I see the following errors in dmesg.


View 3 Replies View Related

Fedora Installation :: SeLinus Is Preventing /usr/Libexec/colord From Getting Access On The Blk_file /dev/dm-0

Jul 26, 2011

I just downloaded Fedora 15 desktop to a USB device. I am able to boot to the device and load the desktop with errors.I receive the following:

SeLinus is preventing /usr/Libexec/colord from getting access on the blk_file /dev/dm-0
Plugin: catchall
Source Process: /usr/libexec/colord
Attempted: getattr
On this blk_file: /dev/dm-0

I also am not able to use my wireless network. This is being booted on a Dell Inspiron 1545 Vista Sp2 system with 4 gb or RAM.The wireless network connection works fine with Vista.

View 2 Replies View Related

Debian Configuration :: Nautilus Segfault Preventing Login By Gdm

Mar 5, 2010

I removed my .gnome and .nautilus folders and .notifier file. it is working now. I do not know exactly which of these 3 fixed it but I hope this might help someone else!I have some major issue with nautilus which is preventing me from loogging in into my system which is kind of criticle this weekend.I'm running Squeeze with latest updates.

The problem:Today gnome gave some problems caus my taskbar was suddently gone. I couldn't get it back to i reinstall gnome-desktop and updated my whole system. At the update some yes/no questions on a blue screen asking me to restart cups etc had corrupted yes/no buttons. Weird character sets were shown. Well that can happen sometimes i thought.After reinstalling gnome i can't login anymore. My screen keeps flashing while it shows the loading icon of the mouse.Anyone got suggestions? I can't find similar problems on the internet, only problems that happen while already logged in. In my case the segfault prevents gdm starting!

View 1 Replies View Related

Debian Multimedia :: Segfault In Loading Plasma5

Sep 6, 2015

I'm having some trouble after the day 31 upgrade. Using the lightdm, kdm or sddm I'm unable to start a plasma session. Through dmesg I'm seeing that something is wrong with libxcb:

Code: Select all[ 3036.768102] drkonqi[5137]: segfault at 0 ip 00007fe39dce1a74 sp 00007ffce440bbb0 error 4 in[7fe39dcd7000+21000]
[ 3036.866658] drkonqi[5140]: segfault at 0 ip 00007fb637258a74 sp 00007ffe73d9cdd0 error 4 in[7fb63724e000+21000]
[ 3038.292760] drkonqi[5146]: segfault at 0 ip 00007efe584c8a74 sp 00007fff76ee5d70 error 4 in[7efe584be000+21000]
[ 3038.395858] drkonqi[5149]: segfault at 0 ip 00007f0fbc309a74 sp 00007ffc45fc0e20 error 4 in[7f0fbc2ff000+21000]

And I'm getting this in xsession-errors:

Code: Select allXsession: X session started for cris at Dom SetĀ  6 12:17:01 WEST 2015
localuser:cris being added to access control list
startkde: Starting up...
kdeinit5: preparing to launch 'libkdeinit5_klauncher'
kdeinit5: Launched KLauncher, pid = 5789, result = 0
Qt: Session management error: networkIdsList argument is NULL

[Code] .....

View 1 Replies View Related

Debian Configuration :: Kernel Panic - Not Syncing / Segfault At Init

Feb 19, 2016

I recently tried to install php5-gd package on my debian vmware server and it failed at libc6 - i386.

Afterwards every command other than CD caused a Segmentation fault and the server would no long boot, showing the following error

[ 4.808086] init[1]: segfault at 0 ip (null) sp bff4645c error 14 in init[8048000+8000]
[ 4.808372] Kernel panic - not syncing: Attempted to kill init!
[ 4.808442] Pid: 1, comm: init Not tainted 3.2.0-4-686-pae #1 Debian 3.2.65-1

View 0 Replies View Related

Debian Hardware :: After Compiling SANE, "scanimage -L" Does Not Detect The Scanner?

Aug 5, 2010

I found someone who has a CanoScan 9000F (the new Canon flatbed scanner replacing the 8800F which is already supported in SANE 1.0.21), and managed to find out that it also uses the PIXMA protocol (the protocol used in the scanners for Canon's multi-function printer/copier/scanner devices of the PIXUS/PIXMA MP series (and other names depending on sales region).

Support for the scanner has therefore been added in the pixma backend. However, the initial tester is having trouble compiling and configuring SANE from source, so I am hoping there will be some people here who have access to this scanner and can try to help out as well.

After compiling SANE, if "scanimage -L" does not detect the scanner, probably "usb 0x04a9 0x1908" needs to be added to /etc/sane.d/pixma.conf and /usr/local/etc/sane.d/pixma.conf.

After that slow steps need to be taken to get support for the various resolutions, as this scanner as double the number of CCD rows as the 8800F, and can do double the resolution (up to 9600dpi) optically.

View 14 Replies View Related

Fedora Hardware :: Sane - Does It See My Scanner Or Not?

Mar 28, 2010

I have a Genius CP-SF600 scanner. I have put the fimware in the necessary directory for the backend (/usr/share/sane/gt68xx), and what I run sane-find-scanner I get:

$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0458, product=0x2021, chip=GT-6816?) at libusb:002:006
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.

However, when I run scanimage -L I get:
$ scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). So sane sees the scanner, but then scanimage says it can't find any scanners. If I run scanimage -L as root it does seem to find the scanner.. so its a permissions problem somewhere.. I will keep investigating....

View 2 Replies View Related

OpenSUSE :: Any Changes From 11.1==>11.2 Affecting SANE Support Via USB?

Feb 4, 2010

I've been running 64-bit openSUSE 11.2 since shortly after it's release, on a quad core AMD Phenom based machine, using KDE as the Desktop. I have a USB-attached "multi-function" printer/scanner/etc., which worked fine with XSane under 11.1. On the same machine, with 11.2, I can still get a scan preview. But when I try a full scan, shortly after it starts, the progress bar stops, then XSane complains about an I/O error.

When I update openSUSE versions, if I can, I keep the old version completely intact, on the same machine. This includes the /home partition, I don't overwrite it. Sure it's a good deal more work to copy over the numerous files needed, but if there are any problems with the new software, it's extremely helpful to have a completely intact old environment for reference. I was able to do this, while updating 11.1 ==> 11.2. Booting the old 11.1 system on the same machine, I haven't encountered any scanning problems.

I haven't given a lot of details, because it's the same hardware, that should "in theory", mostly eliminate the hardware as a possible source of the problem. I'm hoping the problem can be resolved by focusing on any changes in SANE support, or XSANE itself, for USB attached scanners. It could be unrelated, but messages such as these are in /var/log/messages on the 11.2 sys:

Feb 3 17:45:03 toe-heaven kernel: [ 5881.313532] usb 3-1: usbfs: interface 0 claimed by usblp while 'xsane' sets config #1
Feb 3 17:45:03 toe-heaven kernel: [ 5881.313560] usb 3-1: usbfs: process 8214 (xsane) did not claim interface 1 before use

If XSane is doing things in the wrong order, I'm wondering if it would be a problem especially for a combined printer/scanner, or would the problem still occur if the printer and scanner were two physically separate devices? I checked and there are similar messages in /var/log/messages with 11.1. But if it is an error in the sequence in which XSane does things, could it somehow cause problems under 11.2, yet not 11.1? I tried to find anything which might be related to USB device handling, which perhaps could interact. I came across messages such as these in 11.2, but not 11.1:

Feb 4 15:15:10 toe-heaven udev-configure-printer: add /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/usb/lp1
Feb 4 15:15:10 toe-heaven udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:02.0/usb3/3-1

Is USB printer handling somehow different under 11.2? With a combined printer/scanner, could there be an interaction? I did some experimenting. I kind'a thought a scan preview was just a scan at low res. So I tried to do full scans, starting with the lowest res., and increasing. I was able to do successful full scans at 100 or 150. But from 200 on up, the higher the res., the shorter the time to get an I/O error. I'd normally use 600 or above, to get what I feel is a good looking scan. At 600 the error report is practically immediate. It's almost as if the error only occurs above a certain threshold, of amount of data per unit time. I should mention, although it's a color scanner, I'm scanning a black and white doc., so using that mode of XSane.

View 1 Replies View Related

Slackware :: Sane Not Reading Dll.conf?

Jul 9, 2010

I'm trying to setup an Epson perfection 4490 photo scanner in Slack 13.1. I've got the appropriate iscan and epkowa driver and firmware. However it is not working: sane-find-scanner produces:Code:found USB scanner (vendor=0x04b8 [EPSON], product=0x0119 [EPSON Scanner]) at libusb:001:004but scanimage -L finds nothing. After battling a lot with dll.conf and epkowa.conf I decided to run strace scanimage -L and to my shock it never tries to read dll.conf, instead it goes straight to read xerox_mfp.conf and does not try to read any other conf file in /etc/sane.dHas anyone come across problems with sane in 13.1 (or 13.0 as I tried this before upgrading with the same results)?

View 9 Replies View Related

Slackware :: Sane - After Upgrade To 1.0.22 Cannot Find Scanner

Mar 24, 2011

I have a Samsung SCX-4200. It was working pretty good with sane 1.0.21. I'm using slackware current, keeping updated (almost) every day. On the Mon Feb 28 update sane was updated to sane-1.0.22-i486-1. After that update xsane (as user) cannot find my scanner. I was able to find it running sane-find-scanner as root, but scanimage -L (as root) wasn't able to find the scanner. Now I have updated to the last sane package, named sane-1.0.22-i486-2 . In the changelog I can see that this rebuild should add libusb support.

In fact, now there's no way to find the scanner. And now also sane-find-scanner (as root) is no more able to detect the scanner, also running the command as root. I've tried running sane-find-scanner -v -v and scanimage -v -v -L but I can't get no useful hints. I have checked the sane configuration files but always seems good (the row with USB IDs is not commented in the backend file, which is xerox_mfp, and the backend is listed in dll.conf).

View 10 Replies View Related

Ubuntu :: LibUSB Not Available To Sane Find Scanner

Apr 21, 2011

I too have what looks like the same problem. I too have read all the relevant man pages and other relevant sites:
Supported devices [URL]
CanoScan LiDE 110 (the printer I've just bought) has "complete" support apparently.
Followed directions here: [URL]
Read: [URl]
Another story of purchasing a "complete"ly supported scanner. [URL]
The solution? Use windows xp in a vm.

I don't think much of that sort of solution. As a temporary work around... ok. I'm running debian lenny.

uname -r

Bus 005 Device 002: ID 04a9:1909 Canon, Inc.

sane-find-scanner -v -f
libusb not available
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# SANE has been built without libusb support. This may be a reason
# for not detecting USB scanners. Read README for more details.

scanimage -L
device 'v4l:/dev/video0' is a Noname USB 2.0 Camera virtual device

dpkg-query -l '*libusb*'
clearly shows I have libusb installed:
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library

View 2 Replies View Related

OpenSUSE Hardware :: Recompile SANE Backend To The Same Directories?

Mar 10, 2011

I recently bought scanner, the driver to which is currently in process and is not yet committed into the main repo, so I downloaded the new code and compiled it into /usr/local/ and openSUSE's YaST scanner configurer doesn't see the new versions and continues to work with the old ones.

View 9 Replies View Related

Ubuntu :: Install The Sane-backends Package On Windows?

Apr 1, 2010

Is it possible to install the sane-backends package on Windows?

I need to do this so I can share a scanner connected to a Windows machine across the network for Windows and Linux clients running Xsane.

View 3 Replies View Related

Ubuntu :: Running Scanner From Virtual Box - Not Supported By Sane

Nov 16, 2010

I have and old scanner, Canoscan 3200F, which is not supported by sane. It will not run in Wine, because there is no Sane support. Does anyone know if I was to install a Windows OS in Virtual Box would that enable me to run it or would I have the same problem as I have with Wine?

View 2 Replies View Related

Hardware :: HP CM 2320 FXI Scanner And Sane - No Device Detected

Mar 6, 2011

I have a problem here where sane no longer detects my scanner.

Bus 007 Device 002: ID 03f0:5b17 Hewlett-Packard

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x5b17 [HP Color LaserJet CM2320fxi MFP]) at libusb:007:002

scanimage -L

No scanners were identified. xsane reports no devices detected (I have it in French, "Aucun p'rif'rique disponible"). I get the same when I launch xsane as root, so I doubt it is a usb-rules issue. It used to work; I checked /proc/bus/usb, but that is empty.

View 3 Replies View Related

Software :: Sane Device Information For Network Scanner?

Jul 22, 2011

OS: CentOS 5.6 yesterday i bought a new HP network printer/scanner (OfficeJet Pro 8500). It installed correctly using hplip drivers. I can print and scan without any problem, very nice and fast device. I did some research where the information where the device port is stored in sane, but cannot find anything. I tried to remove my old network device port for my Brother scanner, but did not find the config file where this information is stored. Neither /etc/sane.d/* nor ~/.sane/xsane/* contains this information.

View 14 Replies View Related

Slackware :: Cups / Sane Server System Requirements

Jul 1, 2011

I have a 2010 model laptop running slackware 13.1, and after setting up a udev rule for my epson rx700 printer/scanner, this laptop can print to the rx700 without problems, and I can scan straight into gimp with xsane... I can even share the printer and scanner over my local lan.however when I pack up my laptop and hit the road, the other folks in the house cannot print or scan over the network anymore, so I tried to get an older desktop we have laying about to be the cups / sane server instead of my laptop.I tried a Dell Dimension 8300, and a Dell Optiplex GX 260. Both have USB 2.0 however, on fresh slackware 13.37 installs, even after the udev rule, neither old computer is successful finding the scanner with sane-find-scanner, although it is listed in output of lsusb.

does anyone know if there is a workaround on these older machines, or have there been some hardware changes in the last 8 years that the machines haven't undergone, and I should give up trying to get one to be cups/sane server for rx700..

View 6 Replies View Related

Slackware :: Getting Epson CX5000 Scanner Working With Sane?

Mar 30, 2010

I have been given an Epson CX5000 3-in-1 that I only want to use the scanner part of (I have a laser and hate buying ink). The scanner works, tested under windoze, but xsane and scanimage -L fail to find it. But, lsusb does:
$ /sbin/lsusb
Bus 001 Device 003: ID 04b8:082b Seiko Epson Corp. Stylus DX5050

I saw a post about it under ubuntu that you had to modify
Which doesn't exist on my Slackware 13 install. I hope this Epson runs faster than my Canon FB630U, which takes almost a four minutes to scan a 5x6 photo and forget scanning an 8.5x11 page (go take a nap).

View 2 Replies View Related

Fedora Hardware :: Sane Drivers And A Scanjet HP4570 Scanner

Mar 21, 2011

I am having a problem with the Sane Drivers and a Scanjet HP4570 scanner. I have sane-backends-1.0.21-6.fc14 and I am running on x86_64 machine. Other info in my signature below. I have verified that the specific Scanner works as I have installed it on a Win Machine. I ran yum provides *libsane* . Results with respect to the hp5590 libs was --->


How to get the Scanner working, as I would expect it to work out of the box. It is one of the scanners that is completely supported, as per SANE web page info. I also have a hp3300c and it found that immediately.

View 7 Replies View Related

Ubuntu :: SANE / HPLIP And F300 Hangs With Large Scan Areas

May 5, 2011

SANE + HPLIP 3.11.3a-1 + Tomato v1.28.8754 ND USB Std + Hp Deskjet F380 (F300 series) only works with small scan areas. This error is affecting SANE running on my tomato router, this affects all computers that try to use that scanner, regardless of platform, in fact, it affects scans originating from the router itself. I believe that it could also happen on ubuntu if I had the same configuration as the router, it seems to be an error that would happen on any platform with the same SANE/hplip settings and hardware (HP Deskjet F380). The problem is also related to DPIs, but I can't manage to get one full page with 75 DPI, which is the lowest possible. If I get a small area (around 1/4 of the full glass) it will scan at some times.

If I increase the DPI, it won't scan. I will get an Error during device I/O, even if I try to scan directly from scanimage. I would like to have the scanner function of my AiO printer working, at least to scan the full glass in low resolutions (<=150). I can't load previews as well. I thought it could be a memory problem, since it does scan small areas, but it is not, in fact, the memory usage doesn't increase much during the scan, I even created a 128MB swap partition in my flash drive (was afraid of doing so, since it would wear it quickly, will probably remove now), but it didn't change anything, it still doesn't scan with more than 55% of the router's memory (16MB) free and more than 97% of the swap memory free.

Here are my configuration files:



service saned
port = 6566
socket_type = stream
server = /opt/sbin/saned
protocol = tcp
user = root
group = root
wait = no
disable = no

# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# Sample configuration file for xinetd
only_from = localhost
instances = 60
log_type = FILE /opt/var/xinetd.log
log_on_success = HOST PID
log_on_failure = HOST
cps = 25 30
includedir /opt/etc/xinetd.d

Everything is configured properly, I got the dbus and cups installed since both are required for hplip to work properly. Here are some other files, that shows what happens:

# sane-find-scanner will now attempt to detect your scanner. If the result is different from what you expected, first make sure your scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that you have loaded a kernel SCSI driver for your SCSI adapter. Also you need support for SCSI Generic (sg) in your operating system. If using Linux, try "modprobe sg".

found USB scanner (vendor=0x03f0 [HP], product=0x5511 [Deskjet F300 series]) at libusb:001:006
# Your USB scanner was (probably) detected. It may or may not be supported by SANE. Try scanimage -L and read the backend's manpage. Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports can't be detected by this program.
scanimage -L

device `hpaio:/usb/Deskjet_F300_series?serial=CN6BSGK1M104KH' is a Hewlett-Packard Deskjet_F300_series all-in-one

root@white:/opt/bin# ./hp-probe -busb
warning: python-dbus not installed.
warning: hp-probe should not be run as root/superuser.

HP Linux Imaging and Printing System (ver. 0.0.0)
Printer Discovery Utility ver. 4.1

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP. This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details.

Found 1 printer(s) on the 'usb' bus.
scanimage > test.jpg

scanimage: sane_start: Error during device I/O
saned -d5
[saned] process_request: waiting for request
saned doesn't report any error, but starts waiting for another request.

View 1 Replies View Related

Software :: Sane Parport Canon N640P Scanner / Getting The Dialog 'No Devices Available'?

Apr 20, 2010

1. Unless root chmod's /dev/parport0 to include o+rw, a user running xsane just gets the dialog 'No devices available'. Should the canon_pp driver be installed as su root, perhaps? CUPS uses the same port for printing without problems. Which library or executable needs to have permissions changed to change to run as root?

2. The N640P has a printer output port built in. As I have only one parallel port, I piggy-back my printer through the scanner. This does not work for xsane in Copy mode: nothing prints until I close xsane and then all I get printed is a stream of binary characters, not an image. I guess the canon_pp driver is holding the port open in such a way that CUPS sees the device as being busy. Any ideas on how to combat that? I am a C programmer and quite happy to help by hacking the code, if I have a start point. It irritates me to have to boot the print server into WinXP just so scanning and copying work without fuss.

View 8 Replies View Related

OpenSUSE :: Automount: Segfault At ... In

Feb 4, 2010

automount[9052]: segfault at 60 ip 00007f75c15bcd7c sp 00007f75c0753c30 error 4 in[7f75c15b6000+1b000]/etc/hosts... zbv6 zbv6.gud.s.atcd /net/zbv6/home

View 2 Replies View Related

Ubuntu Multimedia :: PSX Crashes With A Segfault?

Feb 19, 2010

When attempting to run pSX on Ubuntu 9.04 (and the 9.10 livecd), it crashes with a segfault. I -have- read [URL] and tried shutting down pulseaudio as recommended there. However:

$ sudo /etc/init.d/pulseaudio stop
* PulseAudio configured for per-user sessions
$ sudo killall pulseaudio


How do I get pSX working? I tried copying the psx.ini file from another machine because the thread says pSX works fine after you change the sound device used, but it still segfaults when I try running it.

View 2 Replies View Related

Ubuntu :: Compiz SegFault Randomly In 11.04?

May 6, 2011

I am on a fresh install of Narwal. I've switched to classic because unity wasn't mature enough IMO. Just installed ccsm and now my display will crash randomly after running for a short while.

daniel@orange:~$ compiz --replace --debug
compiz (core) - Debug: Could not stat() file /home/daniel/.compiz-1/plugins/ :


View 2 Replies View Related

Copyrights 2005-15, All rights reserved