I have Lenny 5.0 and would like to upgrade to 5.0.8 or the latest upgrade for Lenny. I don't know if it would be easier to download the 5.0.8 version or just upgrade the 5.0. Frank
View 3 RepliesI run into a problem when trying to update from lenny to squeeze. Seems that util-linux fails to install due to some error and that this causes xorg as well as udev to fail. If this is the case then it might be a bug in the post-installation script for util-linux..Am I on the right track or is it completely wrong?
View 5 Replies View RelatedI am running a lenny server. So I don't have physical access.How can I upgrade to Squeeze without everything breaking? Also, I want to use "apt-get", not "aptitude".
View 8 Replies View RelatedI have a Debian Lenny LAN Gateway machine running shorewall, squid and a source install of ossec in the opt dir. The machine is an Intel Atom based asus hummingbird with no gui. It works well and has been very stable so far. However, i am considering upgrading to Squeeze. Is it feasible to attempt to upgrade this machine, or am i realistically looking at a reinstall and reconfigure with Debian Squeeze over a long weeked?
View 2 Replies View RelatedI try to upgrade Etch to Lenny and get the following problem:
Code:
# apt-get update
# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree... Done
[code]....
Now when new stable debian is squeeze I was wondering how do I apply updates to my lenny distro?I just want to apply all updates available for lenny, but DO NOT WANT to upgrade my lenny to squeeze.
View 1 Replies View RelatedI live in Swizterland and am using a Swiss mirror.I want to upgrade my Lenny installation to Squeeze
View 6 Replies View RelatedI've a very old server with Debian Etch, and now I need to upgrade to Squeeze. I think it's correct to upgrade first to Lenny, so I followed this link:
[URL]
[code]....
Score is -2280
Accept this solution? [Y/n/q/?]
when I tried to upgrade my computer from Lenny to Squeeze and it downloaded everything but it's stuck at installing udev which it said it couldn't do on the 2.6.26 kernel. I then did update-grub and Squeeze's 2.6.32 kernel was seen (on grub). I have grub-legacy chainloading (if I'm not mistaken) but I don't have grub2 installed. When I try to boot through the 2.6.32 kernel so that I can complete the upgrade (that is to install udev and have everything working fine), instead of reaching the OS, it says something along the lines of "kernel panick not syncing vfs" and something about "root(hd1,0)".
View 10 Replies View RelatedI'm currently using Debian Lenny 5.0.7 and I tryed to upgrade to Squeeze. I followed the instructions from Debian's Guide:
1. I changed my repositories to squeeze in sources.list
2. # aptitude update
3. # aptitude install apt aptitude dpkg
4. # aptitude safe-upgrade
After this last command, the computer kept working for about 7 hours, it consumed 2 gb RAM and 1 gb swap, and in the end aborted with the following message:
I searched around and I found out that this error is somehow related to C/C++ package compilation, but I found nothing specific related to Debian's upgrade.
I am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
View 14 Replies View RelatedI have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
View 6 Replies View RelatedA week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
I was upgrading manually my ALSA to the latest version -1.0.23-, so after reboot I got several errors related to ALSA telling me that NO SOUND CARDS Found. so the system is freezed when tries to connect to the network but after that, the system is stopped, nothing else happens, I tried to Ctrl+C and reboot as "single user mode" and still nothing, when I rebooted I can see a message that says: "busy trying to mount /" .So my questions are:
1. is there a way to log into the system?
2. is there a way to deactivate this driver on startup?
3. when I can login, how can I remove the failed alsa driver?
if this helps, I have another linux distro running in the same HDD, so maybe I can do something for debian for that distro
I'm running Lenny and the nvidia driver is 173.* I need to upgrade to the current nvidia driver but when go to install it I get the message that it was copiled with a different version of gcc and might screw up my kernel. any suggestions to upgrading to the current nvidia driver?
View 6 Replies View RelatedI'm trying to upgrade a Debian Etch box to Lenny. I've opened /etc/apt/sources.list, did a global replace etch->lenny. Then I did "apt-get update" as root. After some activity, I got the following message:
W; GPG error: http://security.debian.org lenny/updates Release: the following signatures couldn't be verified because the public key is not available: NO_PUBKEY xxx And then another error of the same nature for the different, FTP site. Then it said I might to run apt-get update to correct that.
before i had a wifi work.I have do apt-get upgrade and now i don't have wifi.I try to install one more time driver sound = no difference.
View 3 Replies View RelatedI've found myself using Ubuntu more recently because of newer packaged apps, so I finally decided I'd upgrade my laptop and desktop”each amd64—to Squeeze, instead of starting a bunch of apt-pinninng. I started with the laptop, which despite my preparations is now broken.
View 14 Replies View RelatedI have actually done quite a lot with Linux servers over the years. One thing I haven't ever done is upgrade one. At this time, however, it looks like my Lenny server must be upgraded to a newer MySQL, and I'm beginning to think it is easier to upgrade the entire installation.Is there a recommended way to upgrade Debian without disturbing home directories, non-standard directories such as /mystuff, config files such as my.cnf and smb.conf, etc?
View 6 Replies View RelatedI have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
I just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
<Big Red Flashing Sign that reads, "NEWBIE with two Linux books and very little brain"> I just installed Sarge from a CD onto an old PC and ended up with Debian Linux 3.1, Kernel 2.4.
PC Specs:
Spacewalker Mainboard (AK31V3.1) SocketA AMD Athlon/Duron Processor based DDR Main Board
2x 256MG DDR DIM Q
350w power supply
NVIDIA GeForce AGP8X 6200 Graphics Card 256 MB RAM
Award Modular Bios v6.00PG 12/05/2003
LG Monitor
USB Mouse, Standard keyboard
I did not configure any servers or do any package selections but did manage to get the internet connection working (actually Debian managed that all by itself). I'd like to "upgrade" to Lenny.
Do I need to upgrade to Etch first or can I go straight to Lenny? At what point do I "upgrade" the kernel (before upgrading to Etch/Lenny? After?)
I'm trying to upgrade an etch system to lenny, I've updated my sources list to lenny and ran apt-get update. When I try apt-get install apt
apt-get install apt I get the following:
Reading package lists. Done Building dependency tree. Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation:
The following packages have unmet dependencies. apt: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch10+b1 is to be installed Depends: libstdc++6 (>= 4.2.1) but it is not going to be installed E: Broken packages
if I try apt-get install apt libc6, it wants to upgrade a whole heap of packages - will this be a safe thing to do ?
Basically, I have no trouble booting off a really old kernel like 2.6.18-6. If I try to boot off the newest one installed with Lenny, I get errors such as "mounting /dev/ on /root/dev failed...ditto for /sys on /root/sys" almost as if it's failing to find the drive. This finishes up with "target filesystem doesn't have /sbin/init" and I'm dropped into a busybox shell.It's an ordinary SATA drive, which is being used as an OS drive only. It seems as if something has changed with the newer kernel, but I have no idea where to start or what to look for.
View 3 Replies View RelatedI'm having some trouble getting Miro updated. The package in Stable is 1.2.3-2, and I can't see all the online content because I don't have the 2.0 version. The thing is thar actually Miro is in its 3.0.1-2 version! I searched the package and is only found on testing (It's not in backports). I was wondering if I can install a package from testing in stable.
View 14 Replies View RelatedI have upgraded from Lenny to Squeeze. Aside from a few installation issues, the upgrade went relatively smooth. I had a problem with the graphics proprietary driver not being installed after the upgrade but I was able to solve the problem. I also successfully upgraded the filesystem from ext3 to ext4. One thing that did break on the upgrade is that now I do not have the capability to add and switch workspaces. I went into compizfusion and added for horizontal workspaces, but clicking on them does not switch to them. If I right-click on the preferences, it does not let me allow to add any more workspaces. I can change the number workspaces displayed through Genetal tab in compiz but the graphics appeared that they exist, but when I click or try to even switch between them it does not work. I was able to send a window to workspace two but then I lose all access to it. So it seems it might even exist but the applet in bottom right corner does not let me switch between them.Also draggin a window of the edge to another workspace does not work.
View 8 Replies View RelatedI've done the ordinary sources.list update (lenny to squeeze) and Code: sudo apt-get update sudo apt-get install dpkg apt aptitude.sudo aptitude full-upgrade However, udev failed to install, and I used..Code: touch /etc/udev/kernel-upgrade and did full-upgrade again. Everything was going fine, I went through several package configurations and suddenly, after 30-40 minutes of "Unpacking Setting up." I just heard two system beeps and got an error similar to a kernel panic. The SYSRQs did nothing. Did a hard reboot.I got two kernels in GRUB now. + the GRUB2 chainloading option. Used this one and got Code: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block It's all the same with the 2.6.32-5-686 kernel kernel panic. Using the older kernel didn't fail on the boot up, but showed many UDEV related errors and logging in was impossible - all I get were segmentation faults. Forgot to mention it - my FS is Reiserfs
View 7 Replies View RelatedI was upgrading manually my ALSA to the latest version -1.0.23-, so after reboot I got several errors related to ALSA telling me that NO SOUND CARDS Found then the kernel activate the ACPI, the mysql and CUPS services and finally tries to connect to the network but after that the system is freezed, nothing else happens, I tried to Ctrl+C and reboot as "single user mode" and still nothing. so my questions are:
1. is there a way to log into the system?
2. is there a way to deactivate this driver on startup?
3. when I can login, how can I remove the failed alsa driver?
I have another linux distro running in the same HDD, so maybe I can do something for debian for that distro.
I've been upgrading a bunch of our servers from sarge to etch and then to lenny, on two of these servers, cron has broken, cronjobs will not run. On another two (that have no significant differences from the others) cron is unaffected I created a simple job to run while I was testing
*/1 * * * * root /usr/local/mailtest-1 in the script is echo test mail from busted server | mail -s "test mail from your busted server" [URL]. and that runs fine if I run it manually, I've added it into /etc/crontab and crontab -e but haven't got a single mail from it. The cron service is running
I tried apt-get remove --purge and then a re-install but it doesn't seem to have worked. All the logs have stopped rotating as well so I'm starting to think that maybe it's not a fault with cron but with some other service that it depends on. However, I've not been able to figure out what that might be.
I was reading the upgrade documentation for an upgrade from etch to lenny on the following [URL].. And noticed that since today (or mayby yesterday not entirly shure) the documentation speaks about "squeeze" and not "lenny" I am not sure if any other info is changed as well but i find it confusing. Is this an error?
View 7 Replies View Related