Debian Multimedia :: Workspaces After Upgrade From Lenny To Squeeze
Feb 16, 2011
I have upgraded from Lenny to Squeeze. Aside from a few installation issues, the upgrade went relatively smooth. I had a problem with the graphics proprietary driver not being installed after the upgrade but I was able to solve the problem. I also successfully upgraded the filesystem from ext3 to ext4. One thing that did break on the upgrade is that now I do not have the capability to add and switch workspaces. I went into compizfusion and added for horizontal workspaces, but clicking on them does not switch to them. If I right-click on the preferences, it does not let me allow to add any more workspaces. I can change the number workspaces displayed through Genetal tab in compiz but the graphics appeared that they exist, but when I click or try to even switch between them it does not work. I was able to send a window to workspace two but then I lose all access to it. So it seems it might even exist but the applet in bottom right corner does not let me switch between them.Also draggin a window of the edge to another workspace does not work.
I run into a problem when trying to update from lenny to squeeze. Seems that util-linux fails to install due to some error and that this causes xorg as well as udev to fail. If this is the case then it might be a bug in the post-installation script for util-linux..Am I on the right track or is it completely wrong?
I am running a lenny server. So I don't have physical access.How can I upgrade to Squeeze without everything breaking? Also, I want to use "apt-get", not "aptitude".
I have a Debian Lenny LAN Gateway machine running shorewall, squid and a source install of ossec in the opt dir. The machine is an Intel Atom based asus hummingbird with no gui. It works well and has been very stable so far. However, i am considering upgrading to Squeeze. Is it feasible to attempt to upgrade this machine, or am i realistically looking at a reinstall and reconfigure with Debian Squeeze over a long weeked?
Now when new stable debian is squeeze I was wondering how do I apply updates to my lenny distro?I just want to apply all updates available for lenny, but DO NOT WANT to upgrade my lenny to squeeze.
when I tried to upgrade my computer from Lenny to Squeeze and it downloaded everything but it's stuck at installing udev which it said it couldn't do on the 2.6.26 kernel. I then did update-grub and Squeeze's 2.6.32 kernel was seen (on grub). I have grub-legacy chainloading (if I'm not mistaken) but I don't have grub2 installed. When I try to boot through the 2.6.32 kernel so that I can complete the upgrade (that is to install udev and have everything working fine), instead of reaching the OS, it says something along the lines of "kernel panick not syncing vfs" and something about "root(hd1,0)".
I'm currently using Debian Lenny 5.0.7 and I tryed to upgrade to Squeeze. I followed the instructions from Debian's Guide:
1. I changed my repositories to squeeze in sources.list 2. # aptitude update 3. # aptitude install apt aptitude dpkg 4. # aptitude safe-upgrade
After this last command, the computer kept working for about 7 hours, it consumed 2 gb RAM and 1 gb swap, and in the end aborted with the following message:
I searched around and I found out that this error is somehow related to C/C++ package compilation, but I found nothing specific related to Debian's upgrade.
I am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
I have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
A week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
I've found myself using Ubuntu more recently because of newer packaged apps, so I finally decided I'd upgrade my laptop and desktop”each amd64—to Squeeze, instead of starting a bunch of apt-pinninng. I started with the laptop, which despite my preparations is now broken.
I have actually done quite a lot with Linux servers over the years. One thing I haven't ever done is upgrade one. At this time, however, it looks like my Lenny server must be upgraded to a newer MySQL, and I'm beginning to think it is easier to upgrade the entire installation.Is there a recommended way to upgrade Debian without disturbing home directories, non-standard directories such as /mystuff, config files such as my.cnf and smb.conf, etc?
I have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
I've done the ordinary sources.list update (lenny to squeeze) and Code: sudo apt-get update sudo apt-get install dpkg apt aptitude.sudo aptitude full-upgrade However, udev failed to install, and I used..Code: touch /etc/udev/kernel-upgrade and did full-upgrade again. Everything was going fine, I went through several package configurations and suddenly, after 30-40 minutes of "Unpacking Setting up." I just heard two system beeps and got an error similar to a kernel panic. The SYSRQs did nothing. Did a hard reboot.I got two kernels in GRUB now. + the GRUB2 chainloading option. Used this one and got Code: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block It's all the same with the 2.6.32-5-686 kernel kernel panic. Using the older kernel didn't fail on the boot up, but showed many UDEV related errors and logging in was impossible - all I get were segmentation faults. Forgot to mention it - my FS is Reiserfs
my mouse wouldn't work in any fashion after going through most of the install process from Debian Lenny to Squeeze (couldn't click, move the mouse, etc. under both Compiz and Metacity). My system is a Lenovo ThinkPad T61 laptop; I keep the touchpad disabled, but the button mouse (TrackPoint) wouldn't work either. I was following the instructions here:
[URL]
So, the first thing I did was run the following commands, as it says to do:
Then, I rebooted my machine into the new kernel (2.6.32-5-686). I got a ton of udev warning messages at startup (all along the lines of "SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in something-or-other" - details can be provided if needed), but got a functioning prompt. I logged in, ran startx, and everything worked except the mouse, which couldn't do anything - as if it wasn't recognized at all. Switching window managers from Compiz to Metacity, as mentioned before, didn't help. "modprobe psmouse" revealed that that module was correctly loaded.
Rebooting into my old backported kernel (2.6.32-bpo.3-686) restored mouse function, although I still had the udev warning messages (so maybe those aren't relevant, I don't know). Apparently, something about the different kernels is causing the problem, but I'm not sure what - any thoughts? I haven't wanted to complete the upgrade with "apt-get dist-upgrade" without knowing that I'll have a working mouse, since I need a functional GUI at the moment and don't have a good way of fixing it if I trash it.
I have a server that was happily running Lenny. Last reboot was over 100 days ago. So I decided to fix it and install Squeeze.the upgrade went well, booted into grub. (with the grub2 test menus).When I login using the console, I get the nice GUI login, and something looks like the graphics world is being setup. The screen goes to a pretty light blue background. But there are no icons, no toolbars, no windows.I could believe something in the Xconfig is broken, say it thinks I have a much larger screen, and all the icons are off the edges. But that is only a guess.
I'm starting to bump into crusty software in Lenny and am looking to upgrade to Squeeze. However, there's no release notes yet and Googling for upgrade directions yields all kinds of variations, some of which talk about "interesting" issue. Thus, my questions:
1. How hard/messy is the Lenny to Squeeze upgrade at this time? 2. Where can I find straightforward, clear directions on how to upgrade?
For quite some time, I just stayed on testing and incrementally upgraded on a regular basis, but stopped after Lenny came out because security support was suspended. Now I'd like to climb back on that train.FWIW, I originally installed Slink in 1999 and haven't reinstalled from scratch since, despite several generations of hardware upgrades.
I could not get the hardware to work with Lenny's ancient drivers, so I gave up and decided to upgrade to Squeeze.Well, the hardware works (except sound), but KDE4 is a such a disaster that I want to run not walk! all the way back to Lenny. I'm stunned that after four years of active development, this desktop still doesn't have something as basic as keyboard shortcuts or the ability to place icons where YOU want them.
The widgets frustrate me to no end. The new K menu is impossible to navigate. I'd rather hang myself than use Dolphin as a file manager. KDE4 gives me more notifications than MS Windows' crapware. And it's UGLY !!! The "Oxygen" theme makes me want to tear my eyeballs out.
Be sure that there is an active X. Press Ctrl+Alt+F1 to switch to tty1. Login with your normal username and password. Enter the command: "xrandr -d :0.0 -q"
You should be rewarded with information about your current screen.
Are you running Squeeze? If yes, try the above procedure and please explain to me what this means: No protocol specified
After upgrading to squeeze I have now X Server 1.7.7 installed and it won't start. When I try to run startx script, monitor gets blank for few seconds and then I get back to command prompt and no errors is displayed.
When I try the same as root, system locks up with blank screen and no functioning keyboard.
Initially I had kernel 2.6.28 which worked fine with earlier Lenny's X Server and Matrox P650 AGP video card. After upgrade I found, that Matrox P650 is not longer supported in new xorg and I swapped it to Matrox G550 AGP card.
Tried mga driver's many options, upgraded to kernel 2.6.37.2, tried with Matrox G200 PCI and Savage 4 Pro AGP card but without a success.
With kernel AGP support turned on I got both with Matrox G550 and Savage card an MTRR error: "error setting MTRR, Invalid argument (22)". Without AGP support in kernel, Matrox G550 gets initialised as PCI card and no errors and X still not working. Same with Matrox G200 PCI card.
With vesa driver the behavior is also the same and output at the end of Xorg.log file is almost the same.
So I understand, that this is some X server problem?
Nothing special in xorg.conf file and tried without it also.
End of the Xorg.0.log file:
>> (II) MGA(0): YDstOrg is set to 0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so
I'm trying to upgrade a headless terminal server like box from Etch to Lenny. Users log in to this box using a GoGlobal client and use applications such as OpenOffice and Iceweasel. Because of the ended support for Etch we want to upgrade this machine to Debian Lenny as soon as possible and in order to save time we decided to dist-upgrade instead of installing a new machine. I've done this upgrade in a test environment and everything is working as expected except for OpenOffice, which seems broken after the upgrade:
The problem seems to be caused by the anti aliasing features of OpenOffice and disabling these features in the options panel (Extra -> Options -> OpenOffice.org View -> Screen font anti aliasing) fixes the UI somewhat:
However, as can be seen in the last screenshot, disabling anti aliasing makes the whole thing look terrible. I've searches the net for solutions such as this one but so far I've not been able to fix this. Is there anyone who can point me towards what has changed in the way fonts are rendered since Lenny and what might cause this breakage for OpenOffice? Other applications such as Iceweasel work perfectly and look better then before.
So I've upgraded from Lenny to Squeeze, which has been a tadge more interesting than I would like, but there it is. But I've got one problem that is eluding me still. When I load up, but before login, my second monitor displays what I can only describe as a glitched-up memory of something it was displaying before, unless it has been turned off and turned back on again (as opposed to restarted), in which case it displays a very bizarre tiled image. I can't help but feel this is something obvious I've missed.
Now that the stable version of Squeeze is available, the newbie that I am is asking himself this almost existential question: should I get Squeeze or stick to Lenny?Some arguments in favors of Lenny that are coming into his mind are that there is more material, tutorials, in brief, more resources to find as to learn and solve problems.
But is this true and if yes, is it a reason?What about security?There is also this widespread saying that tells to always get the last release for performance and security reasons.Being in this position where I obviously don't have a lot of knowledge and experience to judge myself with all the elements, assessing thoroughly all the differents factors, I would have like to listen you opinion(s) on it.
I am currently running Debian Lenny on one of my external HDDs and Debian Squeeze on the other one. I found a package I like in lenny but it seems it has not been added to squeeze (yet). The package is ksirc and i like it because it looks and feels like mIRC that I used in windows. My question is can I install the lenny version on squeeze with out it having an adverse effect? My other question is what do I put into the /etc/apt/sources.list to do this? i now see that ksirc is also available in a sid (unstable) version. Is it safe to install this one to my squeeze distro? and again what do I need to add to my sources.list to do this?
Or could I just download the deb package and install it using dpkg? New to this and just looking for the best way to get a favorite software package.
for reasons i dont know but are waiting for my hosting support to tell me they have choosen lilo over grub.so to be sure that my system reboots after the upgrade i installed grub2 first from the repos and rebootet - system wasnt coming up anymore, sda1/2/3 have at least 20 more mounts before fsck will check them.
im using deb squeeze after upgrading from lenny since upgrading, my pc hangs when trying to save any file with any program like gedit and firefox it hangs for about 2 minutes with a blank save as screen before finally showing the folders screen.
I have Ati HD 4890 card and I need to get it working with game and 3d-software. Which Debian should I choose to get those ati proprietary drivers to work as stable and easily? Can I get them working all the time with Squeeze/Unstable or should I use Lenny for that? If they work with all of them, I'd like to take Squeeze (or is unstable as stable? name doesn't say that at least). So which one I should choose? Can a newbie get fglrx to work on Squeeze?
