I have no more sound on my debian. The only audio output I can find is the "dummy output".
When I try ask to aplay -l to display my sound cards, here's the output :
Code: Select alldevice_list:268: aucune carte son n'a été trouvée... <=> french for "no sound card found"
But I can still see my card(s) using lspci :
Code: Select all00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
Subsystem: Toshiba America Info Systems Device fa49
Flags: fast devsel, IRQ 255
Memory at f7a14000 (64-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: [50] Power Management version 2
[Code] ....
I already updated the system, reinstalled pulseaudio and alsa without any success.
I am running openSUSE 11.2 with an hda-intel sound card (dell latitude d830) in x64. Pulseaudio is only giving me a "dummy" sound card, even though volume in the yast sound configuration works. Volume is definitely not muted.Here is the requested info:alsa-info.sh:[URL]
Sound used to work fine on my computer, but one day my headphone jack stopped working -- when I tried to use it, no sound played through the headphones but did play through the computer's speakers.After I tried to fix it, I lost ALL sound on my computer. I noticed in my sound preferences it says "Dummy Output" and no other hardware.The problem seems common -- I've Googled the issue to death and read many threads here about the same problem -- but no matter how many times I've tried, I can't find a solution that works for me.I'm relatively new to Ubuntu and so there's still a great deal of stuff that
I finally got audio working on my ubuntu 9.10 desktop... now I am having sound issues watching movies from a network share.The sound device continually randomly changes to "dummy output device" and then there is no sound output. The sound icon dissapears on the toolbar. To get it back and audio to start working I have to $sudo alsa force-reloadIt seems to happen everytime there is a network delay, the movie will stop for a second and then when it plays the sound is gone
i recently installed Ubuntu and the USB soundcard worked just fine, but when i changed the "Connector" in Sound Preferences (Output tab) the output stopped working (= no sound). Input still works. Sound did not come back even when i changed the Connector setting back (I hear no sound when its set to Analog Output as well as Analog Headphones, which are the only 2 setting).
After a lot of messing around and research, I figured out how to actually get my bluetooth headphones to connect and stay connected. Although once I shut them off, remove the device and re-add it using Blueman.
Right now, `pavucontrol` shows "Headphones (unplugged)" and there is no sound coming out of the speakers. But there is no sound coming out of the headphones either. They are set to the fallback. I've opened `alsamixer` and made sure everything was turned up. Still, no sound.
Since `bt-audio` isn't on Jessie, I don't know what I should do. It seems like this may be the missing step but I am unsure.
I have a problem on a fresh install of Jessie with KDE. I have three soundcards. In Wheezy I used pavucontrol once for each application to change the sink from the internal to the external soundcard, and that setting would stick each time I rebooted the system (audio would go on the external soundcard). Now each time I reboot the audio gets routed to the internal soundcard and I have to use pavucontrol each time to route the audio back to the external one. URL...
and none of them has worked. I don't know if it's a related issue, but the settings I choose in the for Phonon in the KDE multimedia settings don't stick either. I select the external soundcard as default device and upon reboot the internal one is on top on the preferences list.
have recently installed CentOS 5.6 Final on TWO DIFFERENT desktop PC's, and, on EITHER ONE, I can not get any sound output when using KMid to play a "standard .mid file (the file I am using to experiment with is "Canyon.mid", from the Windoze Media directory, a fairly standard midi audio file, I should think?!). I have normal audio output on both of these machines (.mp3 files, system sounds, etc.), so the specific sound cards are NOT the issue, here!I am thinking I must be missing something, as both of these PC's are completely different CPU types, etc. as well. The only significant similiarity in the two machines is the complete lack of MIDI audio output!And, yea, the soundcards are BOTH MPU-401 compatible, and they both have irq's assigned to this port (or, maybe just one has an irq assigned, I will have to double check...).
I recently upgraded from wheezy to jessie and everything went as planned with dist-upgrade. However I just noticed that I can't play any video file. I thought about upgrading vlc, as it was already installed but it had dependency problems. So I tried to remove it
Code: Select allsudo apt-get remove --purge vlc
Then If I try to install vlc I receive this message:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies:
vlc : Depends: vlc-nox (= 2.2.0~rc2-2) but 2.0.3-5+deb7u2+b1 is to be installed Depends: libvlccore8 (>= 2.2.0~pre1) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.2.0~rc2-2) but it is not going to be installed Recommends: vlc-plugin-samba (= 2.2.0~rc2-2) but it is not going to be installed Breaks: vlc-nox (< 2.2.0~pre2-2~) but 2.0.3-5+deb7u2+b1 is to be installed E: Unable to correct problems, you have held broken packages.
Now, I thought about removing vlc-data but I received this message saying that 253 packages will be removed (624Mb worth of applications). Am I uninstalling my entire system with this?
This is my sources.list
deb http://ftp.us.debian.org/debian stable main contrib non-free deb-src http://ftp.us.debian.org/debian stable main contrib non-free deb http://ftp.debian.org/debian/ jessie-updates main contrib non-free deb-src http://ftp.debian.org/debian/ jessie-updates main contrib non-free deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free
- Debian boots normally - I get the login screen - Once my credentials entered, I see only the grey foreground of the login screen for a couple of seconds, then a black screen with a prompt for like half a second and then I'm back to the login screen. No error message, nothing.
When booting in recovery mode and use startx, it works fine (it's my setup at the moment). From there, if I start gdm3 (systemctl start gdm.service), I get the black screen with a prompt and I can do nothing, I have to shut down directly by pressing the button.I tried to add Debian-gdm user to the video group (even if I don't use nVidia drivers), to replace gdm by lightdm and even to remove any display manager but the issue is not solved.Here are some outputs:
Code: Select all# dpkg-reconfigure gdm3 Job for gdm.service failed. See 'systemctl status gdm.service' and 'journalctl -xn' for details. invoke-rc.d: initscript gdm3, action "reload" failed Code: Select all# journalctl -xn -- Logs begin at Tue 2015-12-29 19:16:26 CET, end at Tue 2015-12-29 20:20:55 CET
[code]....
Since removing gdm didn't change anything, I assume it doesn't have anything to do with it but still.
I'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.
Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.
Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 109 (X_ChangeHosts) Value in failed request: 0x5 Serial number of failed request: 6 Current serial number in output stream: 8
[Code] ....
Some possibly related bugs: [URL] ...
The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.
This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....
Is there a better way of getting a remote desktop in Jessie that I'm overlooking?
I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.
When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.
A few weeks ago I have installed Debian Jessie on KDE Desktop Version. I have a problem with the Display Manager Kdm, if i log out session the monitor turns off (DVI No Signal), the only option that I have it's forced shutdown or reboot via power button. I try another DM lightdm and this works fine. But i liked to know why log out session crash on Kdm.
Adding : TerminateServer=true at the end of /etc/kde4/kdm/kdmrc (Section :[X-:*-Core], solve the issue.
I'm trying to install KDEConnect on my 64 bit Debian system. It's failing because of dependencies.
Tried installing the first dependency, sshfs. It said it cannot find the 64 bit package. So, I tried the 32 bit. That one depends on fuse. Tried to install fuse 32 bit. hat depends on sed. Tried installing 32 bit sed, but the package manager said it's risky to replace 64 bit sed with the 32 bit variant.
I stopped here thinking that I'm risking some stability and the road to the finish line is not visible till the end, meaning I might lose hours trying to do something that fails at the last step. This happened to me few times in the past (with other software) and I really don't want to repeat the incident. I need a stable system and I need my time.
The question is: how to get installed kdeconnect package on Jessie 64 bit ...
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 2275.960] X Protocol Version 11, Revision 0 [ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
I'd like to have acestreamplaer installed in jessie, but I am not able to do it....
I tried with Acestream repos: deb http://repo.acestream.org/ubuntu/ saucy main
But I cant install it, I got this
acestream-player-data : Depende: libavcodec53 (>= 4:0.7-1) pero no es instalable o libavcodec-extra-53 (>= 4:0.7-1) pero no es instalable Depende: libavformat53 (>= 4:0.7-1) pero no es instalable o libavformat-extra-53 (>= 4:0.7-1) Depende: libavutil51 (>= 4:0.7-1) pero no es instalable o libavutil-extra-51 (>= 4:0.7-1) Depende: libdvbpsi7 (>= 0.2.0) pero no es instalable Depende: libupnp4 pero no es instalable o libupnp3 pero no es instalable Depende: libx264-120 pero no es instalable
I am running Debian jessie 64-bit with GNOME 3.14.1. I would like to install the CODE::BLOCKS IDE, described here: [URL] ..... I follow the tutorial for Debian, but having added
Code: Select alldeb [arch=amd64,i386] https://apt.jenslody.de/stable jessie main deb-src https://apt.jenslody.de/stable jessie main
to Code: Select all/etc/apt/sources.list, I then run "sudo apt-get update". This gives me the error
Code: Select allE: The method driver /usr/lib/apt/methods/https could not be found. N: Is the package apt-transport-https installed?
Is it safe to go ahead and install apt-transport-https? I really don't want to ruin my Debian-installation...
I upgraded my system from Wheezy to Jessie and now the audio is tinny. It sounds like a lot of the bass is being chopped off. This happens in YouTube's HTML5 video player, VLC and whatever player it is that Thunar launches for avi files.I'm using Xfce as my desktop, if that matters.I looked around for an equalizer app for pulseaudio but was surprised to find that the there isn't one, or at least not one which is still maintained.
I recently updated my Debian Jessie and somehow that update broke my Debian. I have a Gtx 465 and this has been working fine under Jessie for a year.
After the update I no longer have X running. I tried removing all the Nvida stuff and reinstalling 304-legacy which did not get the Xserver back. I also tried to install Nvidia 304 driver binary but this time it refuses to compile ;( So I am out of luck at the moment.
I am runing Jessie Linux 3.18 Nvidia 465 Gtx Intel Cpu
Code: Select all built-ins [ 41.306] (==) ModulePath set to "/usr/lib/xorg/modules" [ 41.306] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 41.306] (II) Loader magic: 0x7ff757496d80
I have installed clementine and when i press Music-->Exit, clementine still running in the background. Only works "Kill" the process through the KSysGuard or htop application.
To re-produce:
*Open Clementine. *Exit UI interfaz (Music-->Exit). *Clementine still running in the background. *Kill the process e.g throught KSysGuard ( monitor system kde) or htop application.
By freeze, I mean that the mouse can still move, but everything else behind it is frozen entirelyI can switch to a terminal with CTRL+ALT+F1, it's ... I guess... X or gnome-shell or something that's frozen? Not the whole OS thoughThese freezes last anywhere between 5 or 10 seconds and 3-5 minutesI can't predict when they will occur, but often, after a suspend/resume, they will start occuring much more frequently. Also, they often happen after I enter my password and press ENTER on the lock screen after a resume from suspend. But not exclusively -- they can happen at any other time when I'm doing pretty much anything in GNOME...
Things I've Tried...
When frozen, I've tried to CTRL+ALT+F1, login, and run gnome-shell --replace... [*[When frozen, I can successfully CTRL+ALT+F1 and run `service gdm restart`... with the obvious downside of losing everything I have open. But the screen responds immediately and I can log back in to GNOMEI tried running `Xorg -configure` to generate an /etc/X11/xorg.conf file to edit, but received an error about not being able to generate configuration for multiple screens or something (I can retry and provide the exact error if this is a useful direction to try) is it the gnome-shell freezing? Is it X? Is it a problem with the X driver I'm using?
I've been using debian for well over a year, previously with the gnome desktop. I never really liked how much memory and CPU it used, but many things like the hotkeys worked out of the box, and it was relatively easy to configure. After upgrading to Jessie I decided I'd give LXDE a go given it was lightweight and seemed more complete than e17.
However, after over a day struggling to get everything to work just right, I am still unable to use use my hotkeys (volume control, brightness control, etc.). The volume can be controlled through the GUI, but the brightness seems to have no control whatsoever. In any event, I installed the drivers and firmware for the hardware and used the instructions in the link to try and configure the key bindings, but nothing has worked: [URL] ....
:Questions#Change_hotkeys I'm not sure what to do now.
