I have an app installed in user directory, I made .desktop file for it but I want to move it from desktop to "Menu" where are the list of all apps, but I want this icon to be only visible for my user, how can I do it? I have Cinnamon desktop.
View 1 RepliesJessie 8.2
Cinnamon 2.2.16
Sound settings crash when accessed from cinnamon-settings menu:
Code: Select all$ cinnamon-settings
Could not find bluetooth module; is the cinnamon-control-center package installed?
__init__ took 79.102 ms
(cinnamon-settings.py:3856): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] .....
Segmentation fault
Here is the output when trying to open 'Sound' directly:
Code: Select all$ cinnamon-settings sound
Unknown module sound, using cinnamon-control-center
Could not find bluetooth module; is the cinnamon-control-center package installed?
(cinnamon-settings.py:3877): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] ....
Segmentation fault
I've never been able to get bluetooth working. Installed version is:
Gnome-bluetooth (3.14.0-2)
I have an app I've developed in Qt 5.3.1 that has display problems when using 3D accerelation in VirtualBox using Debian Cinnamon. It seems to happen with Cinnamon in any Linux distro I've tried. Once I boot into Debian Cinnamon, how can I stop my Cinnamon session (I think I must start with Ctrl+Alt+F1) , then get a straight X session to run my app without Cinnamon, with 3Dacceleration in VirtualBox?
View 6 Replies View RelatedI'm using debian with cinnamon desktop on a laptop with a second monitor. The panel (the bar where there are the application title bars with some system infos like battery status and clock) is only displaying on one screen depending if it is set as a primary screen. I wanted a way to get a second bar on the second monitor.
Ideally I wanted that each bar should display only the application which is present on that screen but this is completely optional. The most important thing I wanted is at least to duplicate the bar on the second monitor so I can check the clock and other infos..
First I thought that this should be only a little configuration problem.. But I rapidly understand that this is simply not possible. But I also discovered that the new version of the cinnamon desktop (2.6) have got many improvement and is that provide this dual screen options.
I then saw that my version of cinnamon is the version 2.2.16 (the version that is supported by debian). I went to the cinnamon website but I don't find any information on how to install this version.. All the information is related to the linuxmint distro.
I've made a persistent live USB out of an amd64 Cinnamon iso, but it has problems running on my old Dell XPS Studio 16.The laptop has an ATI Mobility Radeon HD 3670, and all needed packages are installed (Xorg, libgl1-mesa-dri, xserver-xorg-video-radeon and firmware-linux-nonfree), but the system starts without video hardware acceleration.I've read that I have, in this case, to tell to use the srivers in /etc/X11/xorg.conf. To do it, I first stop lightdm and do it in tty, but it fails with a long output.how can I give you that tty output? I tried both with > and with tee, but the file I indicate as output is created empty.
View 14 Replies View RelatedHow do i change the login screens background?
Machine has Debian 8.2 with Cinnamon Desktop.
I installed a fresh new Jessie (8.1) with the Cinnamon environment a few days a go, and yesterday I started seeing a strange issue seemingly happening at random.
I'm not sure what I do to cause this, but every few hours all the text and some of the icons (launcher, notifications and some applications) on the panel disappear. Most icons in the menu also vanish.
I've just noticed that some windows also disappear, but instead of showing the window behind them, I see my background image (see attached image).
I can't interact with windows which I can't see, but I can move and resize them (they have no border to grab, but alt+middle mouse works).
I can get around the issue by restarting Cinnamon (Alt+F2, r), but that works only part of the time.
Dmesg shows nothing (most recent message was plugging in my mouse & keyboard).
I'm running this on a Lenovo X201 (which uses Intel HD graphics QM57) and an external monitor (dual monitor configuration)...
I'm using Debian Stretch with Gnome and Cinnamon. My desktop computer sports an nvidia geforce 970 gpu (this may be relevant, and it is the reason I had to go with stretch.) I'm not a very experienced linux user but I get along fine.
I'm sharing my computer with my mom and whenever we have to switch users, the computer seems to shut down for 35 seconds: the screen doesn't receive signal anymore. After a new user is chosen, it takes another 35 seconds to get to her session. This is embarassing because my os runs on an ssd and everything else is nice and fast. At first I thought it may be a matter of us two not using the same window manager or not using the "default" window manager, but changing window managers didn't work.
Today I learned about the existence of /var/log/syslog and I decided to check what happened to it when I switched users. I can't post the whole log of what happens because it is too big, but I put it on pastebin : [URL] ....
I understand almost nothing of what is written here, but I saw some interesting things:
- after 35 seconds intervals where nothing is logged, there is a stall on cpu detected (lines 68, 500)
- my gpu seems to have something to do in all this
I have installed debian 8.2 on a mac mini 5.1 using the cinnamon desktop. Where is the bluetooth settings, can't find it anywhere?. Do I have to install additional software for that or?
View 2 Replies View RelatedI recently have started playing with various distros (Mostly just Zorin and Debian) and have been trying to find a GUI I can actually comfortably use without wanting to punch my screen. This lead me to cinnamon which looks like something I could actually use.
I performed a fresh installation of Debian Jessie without the desktop environment and print server (System Utilities or whatever that option is called was left checked) and after the system installed and booted I proceeded to login as the root and install cinnamon. Unfortunately afterwards my system would be nothing but a black screen with a box saying that cinnamon had crashed and was running in fallback mode.
However if I let a fresh installation install the default GUI of xfce and then perform the cinnamon installation, cinnamon will install and run. My question is why doesn't a clean install with cinnamon work but installing cinnamon after another gui does? I don't get any apparent error messages beyond cinnamon crashing and I'm still fairly new to Linux.
I installed Perl Audio Converter, The system recognizes the install, When I type perl in the terminal it says "Perl is already the newest version" And the perl files appear in my "bin" directory, However the program does not appear in the menu, Is this a common problem?, How do I fix it?
View 1 Replies View RelatedI want to install Eclips program from "Add/Remove Application" in Administration menu!I see this message and I click on 'Enable' button and I am connect to the Internet at the same time.But Eclips program did not install.This problem is for all programs , means my "Add/Remove Application" does not work properly
View 11 Replies View RelatedI've looked everywhere but I can't find where to change the default box for incoming mail, or am I on the wrong track. It's a nuisance having to change folders and I can't configure wastebin to empty on exit.And I can't get kmail to import from evolution. Do I have to go to the evolution storage and do it manually, and if so, how do I do that?
View 1 Replies View RelatedI am not sure if this is a qGIS issue or something to do with my desktop themes? In both KDE and GNOME Classic qGIS 2.12 does not have a menu bar, but only toolbars. What can be possible causes of this? In KDE the Windows Decorations are set to BE II preview, with a customized Desktop theme. Could this cause the menu bar not showing?
View 0 Replies View RelatedI play around with OpenBox and FBPanel, and quite like it.
I started to install both OpenBox and FBPanel in Debian, and the menu don't have any icons on it.
Simply I'm not going to reconfigure everything in both distro, I copied fbpanel configuration folder to my Ubuntu home.
Then I install FBPanel in Ubuntu it have icons within the menus.
This is FBPanel from my Debian Jessie
This is FBPanel from my Ubuntu
I've googled around without any luck about this problem. It's minor and everything else works okay, but still this shouldn't be happen. Since I see the screenshots of FBPanel in Debian they all have icons on it. Tried changing the icon theme, nothing works. If it's because FBPanel can't find any icon, then the launcher shouldn't have any icons right? Also, I use the exact same configuration on both.
Is it because Debian uses different version of FBPanel? Haven't checked both version tho.
When I start a second X session using startx --:1, (as either my normal user or root), it goes straight into and LXDE session (Debian's default, I think). Once LXDE is started, there is no applications menu (only run and logout). How do I get it to show the full application menu that my regular user can see when I log in from GDM3 normally?
View 2 Replies View Relatedi've installed dropbox from URL...i started the daemon and all seems run ok.Now i want to configure the selective syn but i can't see the dropbox icon in the menu bar.i need to select preference from dropbox icon. URL...where is the icon?
View 11 Replies View RelatedI'm running Squeeze with Gnome. Sometimes the buttons in System> Shut Down does not respond to mouse clicks. After rebooting it works again. It seems to be a random problem
View 2 Replies View RelatedOut of daemons desperation* i had to install xfce4 Ok: kidding aside. I would like to add a shortcut to open the menu, but can't figure out how to call it. I checked */bin, but it ain't mentioned there. *heck: I think desolation is the better word.
View 12 Replies View RelatedI use a P2P application (KMLDonkey), whose client (mlnet) can be either started automatically, at startup, or manually, after login. At installation, when prompted, I chose the former so as to minimise the number of clicks. However, with time I found it inconvenient because, of course, it would start downloading even though I haven't started its GUI yet or don't plan to use it at all.
What I would like is to click on 1 entry in the menu and have the client and, in sequence, the GUI start when I decide to use the application. Perhaps this would require a short script in /usr/local/bin? I've tried to write one, but failed miserably, as I'm not good at it. I use KDE, but the application or the desktop manager themselves are not important here, for the solution would apply to any application with a separate client/GUI.
Any recommendations, the only thing I can find is inkscape, gimp doesn't seem to offer that facility.
View 4 Replies View RelatedEach time I reboot I get an additional display of items.
After one reboot:
two user menus
two desktop selection displays
two application menus
...
two open applications showing in system tray
After two reboots:
three user menus
three desktop selection displays
three application menus
...
three open applications showing in system tray
After five reboots:
Six user menus
Six desktop selection displays
Six application menus
...
Six open applications showing in system tray
How can I reset this? I have been using ubuntu for a while, but switch to debian for more stability. I am not very familiar with debian graphics or gnome desktop.
I am running debian 8 with GNOME3.14 with the Applications menu extension and i want to know how to edit the listings and all that stuff ... Also is there a support IRC?
View 2 Replies View RelatedI have some DVD's that I've saved to my comp as an ISO, in Ubuntu they would play fine in Movie Player or VLC, but I've just tried to play one on Debain Lenny and I have the following issues.
Movie Player:
Will play the video but wont bring up the main menu so that I can select which episode that I want. It won't even skip to the next one, it just starts playing the first.
VLC:
So I then though I'd down the trusted ol' VLC. VLC brings up the main menu but I can't select any thing. It just sits there and playing the menu screen for a bit and my mouse clicks seem to have know effect (except double clicking to change to full screen). Then it starts playing the first one, if I try to skip it goes back to the main menu and starts all over again.
This particular issue I sometimes had in Ubuntu with Movie Player (depending on the ISO) but VLC would still play it fine.
Update:
Just got VLC to run the menu correctly by doing the following:
File => Open Capture Device => File Tab => Browse to the file, select it. => Click OK.
I don't really want to have to do this every time I want to watch a video. Does any one know of a setting that will do this when ever I click on the ISO to play it?
It is running when LXDE starts but clicking on it in the menu crashes it. I have removed/purged it many times, still have the same problem.
Trying to start it from terminal gives:
Anyone else running LXDE on sid have this issue?
I filed a bug report on Debian and at Sourceforge. [url] [url]
Trying to get a backtrace using gdb doesn't give any useful info:
I don`t know what kind of combination of keys I pressed, but the title bar of all windows in my Gnome vanished. Trying to fix it, I unmarked the option "show menu bar" in one of my windows. Then, I realised I couldn`t put it back either. It`s kind of frustating be stuck in such a small problem, but Gnome isn`t offering me any easy way to put these things back in place. maybe with a keyboard combination of keys that recovers all of this?
I did it, it recovered Gnome windows default, but the menus are still gone. It just erased my customizations (colors, window color, bar size, etc.)
There is a plethora of apps in the Debian distro -great stuff! Problem is, there is too much to display efficiently in the menus system as currently deployed. I'm thinking particularly of the Science section. Is there a way to rearrange the menus, so that there are sub-menus, such as Astronomy,Biology, Chemistry, Physics etc?
View 2 Replies View RelatedRecently our Son showed me Xscreensaver which he has running on his Debian Squeeze machine. Since I really like what you can do with it and since I use Squeeze as well, I figured that I'd try out the Xscreensaver on my system. Compiz is already working and I haven't had any 3D related problems yet. Anyway, so I install xscreensaver from the software center ... then I go to the main menu ... sure enough it's there alright. Then I place a checkmark in the box to activate/display that feature in the main menu ... but after a second or two the checkmark just vanishes. This happens over and over, even after rebooting.
I thought that a logged in user has full privileges over the items that appear in the main menu? Am I missing something? I don't know of any other (root) method to access the main menu with the apps ... Everything else reacts fine, just the folder for the xscreensaver can't be checked.
I use Debian Jessie with Gnome.
I have installed Timeshift. Administrative password is requested when I click Timeshift icon in Gnome menu. I enter the password (or paste it to be sure) but it always returns with "incorrect password, please try agian" message. I am sure that I type my password correctly.
I looked at the icon's properties. It runs "timeshift-launcher". I changed it as "gksudo timeshift" or "sudo timeshift" or "gksu timeshift", enabled "Launch in terminal", disabled, but nothing changed. Always same password request window appears and it rejects my password.
However when I run "sudo timeshift" or "gksudo timeshift" command in Terminal it accepts my password and runs.
When I run for example Synaptics via Gnome Menu, password request window is with black background and it accepts my password. However when I run Timeshift, password request window is with gray background and it rejects.
Root password was not defined in my system during installation and I am the only user. I run administrative commands via sudo without any problem.
I'm wondering if somebody knows how to add more locations to "Send to", or "Move to" menu. Now there is only Desktop and Home folder. I know there is this nautilus actions configurator app, but with it, I'm able to add to main context menu, not to "Copy|Move to" submenu.
View 2 Replies View Related