Debian Installation :: Unsuccessfull GTK Install Crashed?
Sep 1, 2010
The GThumb needed a new GTK, and I started to install it from source, but it wasn't successfull, but some componens (pango ang GLib) were installed. After it, no GTK-dependent programs start.A typical start brings the message (manually copied):
(gthumb:18382): GnomeUI-WARNING **: While connecting to session manager: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.
(gthumb:18382): GLib-GObject-CRITICAL **: ...
[code]....
View 3 Replies
ADVERTISEMENT
Dec 29, 2010
When I updated Linux it crashed in the middle of the update. I think there was not enough disk space. I had a windows dual boot and tried to make the Linux partition larger but in doing that a crashed grub and can't use Linux or Windows. I tried super grub but it didn't work so I tried to fix the partitions with gparted live cd. It my disk just showed up as empty. I formatted it and re installed debian but it didn't work. I can see partitions but my computer won't boot.
View 1 Replies
View Related
May 11, 2011
One of my disks in my computer crashed, it was the one containing /boot and some data partitions. The other system and /home partitions were on a second disk, which is ok.
I was wondering, can I create a new /boot partition, and keep on using the rest of the system? Can I somehow do it with a chroot from a live/installer disk, run grub, and use my system again? I have another disk which I can put in the system, but there is even an unused partition on the disk which is ok (but it is rather big for /boot).
View 3 Replies
View Related
May 5, 2011
I burned my liveCD very slowly and checked it for integrity. It works fine on, for example, my dell inspiron 1012 netbook.
I am able to create the partitions etc and am shooting for a win7 dual boot. Don't want wubi or the like.
I am unable to boot the liveCD or even install the OS as it hangs on clicking "Try" and the install hangs on "Creating ext4 fs on / "
Also the 11.04 CD seems to have a lot of issues based on my browsing the top few pages of the forum.
View 4 Replies
View Related
Jan 23, 2011
I updated squeeze last night for the first time. It worked fine after 1st reboot last night. There was one reboot stalled at "hald" so I shut down and restarted. Worked ok 2nd time around
Today,upon login I got a string of taskbar notification (which I couldnt read as they all overlapped . I was able to see a kernel error message but couldnt report it (network was down) or save it (USB stick not recognised) Some programs worked, others didnt
I have the partedmagic rescue distro on USB stick so have those programs to use in order to fix the problem. Any idea how I can repair this? I tried fdisk for the hell of it. reported clean partition as predicted. I am using debian-testing-amd64-kde.
View 3 Replies
View Related
May 18, 2011
I upgraded to 11.04, but the updgrade crashed, and now it has some errors with Unity crashing every time I open a terminal. Is there any way to re-install without having to reconfigure all my programs? I am running a dual-boot.
View 3 Replies
View Related
Dec 20, 2010
I decided to upgrade my FC installation to the latest version - FC itself offered the upgrade when I turned the machine on, so it appeared that it was nicely packaged to make the upgrade easy.After a long download of packages, the machine rebooted and then started taking me through configuration options (timezone, disks to use for the installation etc) but then it crashed trying to write to disk and now leaves me at a grub prompt whenever I boot.Is there any way to "get at" the installation files and get back into trying to install or do I now need to download an ISO and burn a DVD and start all over again?
View 1 Replies
View Related
Sep 14, 2015
Usually I start my remote deluge seedbox as a normal user
Code: Select alldeluged
deluge-console &
What is the best way to monitor those processes and bring that up when it crashed?
View 1 Replies
View Related
Jun 26, 2014
I've installed the new Eclipse Luna on my Debian Wheezy (with XFCE). When I try to run, the Eclipse crashes just after the splash screen runs. Well, I've tried to run on other JVM (1.7 update 60), but I got the very same problem.
Here's the log:
#
# A fatal error has been detected by the Java Runtime Environment:
#
# SIGSEGV (0xb) at pc=0x00007f17eb06873f, pid=19045, tid=139741378922240
#
# JRE version: Java(TM) SE Runtime Environment (8.0_05-b13) (build 1.8.0_05-b13)
[Code] ....
Is this a problem with the Eclipse or even its compatibility with my XFCE?
View 2 Replies
View Related
May 12, 2011
I installed a fresh version of squeeze, with kde, and it worked fine. After I untarred my backup /home and /etc, things came to a standstill. I got a final ERROR code after /home. After a restart I got a 'fix your system' warning requiring a Control-D, which I couldn't type. I had used tar -xzvpPf ...... If I had included a -w, which asks for confirmation before overwriting data, could I have prevented this problem.
View 1 Replies
View Related
May 23, 2011
unfortunaly ububtu 10.10 crashed on both my laptops, and there too old to run 11.04, on my desktop there's ubutnu 10.10, can i backup the files on my desktop and install them on my laptop?
View 3 Replies
View Related
Dec 20, 2010
I have recently come across a Debian installation page for powerpc: viewtopic.php?t=20481. It got me motivated to fix the Debian I have on my iBook G4. I have a Debian Lenny installed on my iBook G4 -- but I have been having some sort of problem (mostly likely due to hardware) which causes the system to crash. After the latest crash, the clock on iBook has been readjusted. For this reason, I cannot reboot Debian completely.
Every time I turn on the computer it begins the booting process but before I get to my desktop I encounter numerous error messages concerning my clock. After either OK'ing or canceling these error messages, I get to my desktop but the system by then is either frozen or else not working at all. Worse, I can't even turn off the computer since the upper right corner of the desktop is completely blank and I have no menu to turn off or reboot the system.
It took this computer to a local Apple store and they ran many different hardware diagnostic tests on it. They concluded there's "technically" nothing wrong with the computer. But they said although the system has successfully passed all hardware tests, there may still remain some complicated but slight hardware glitch/es which the hardware diagnostics could not pick up.
View 4 Replies
View Related
Sep 11, 2015
The ATI/AMD graphics hardware is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]
I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":
Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).
It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.
The problem went away by installing ATIProprietary driver("[URL] ....").
PC is dell 9020, i7
View 6 Replies
View Related
Jul 9, 2011
I have a linux (dedicated) server on 1and1. Last night, the server crashed and now I'm only able to access it in rescue mode.
View 3 Replies
View Related
Aug 5, 2010
Couple weeks ago my automatic update did not finished properly. It crashed (I'm not sure about the reason). Since then, I'm not able to see installed new kernels in my computers. I can see them in Synaptic package manager as installed but I do not see them when I reboot. I would like to see them and try them.
View 7 Replies
View Related
Aug 7, 2011
My 10.x install crashed after automatic updates. So I installed the latest version after none of the "help" helped.Anyway in 11.04 I can no longer put icons on my desktop or find icons to start tasks I need like a terminal window for example. Wine doesn't even know it is wine anymore. Nothing is intuitive or automatic.Is there a simple way to find all the stuff or is this version set back to eliminate cometition with apple and windows. I really enjoyed how useful ubuntu was and need the speed and usefulness back like right now.
View 5 Replies
View Related
Jun 21, 2011
I installed F15 a couple days ago without much difficulty (and upgraded the kernel to the most recent, along with all the accompanying applications). However, I wanted to enhance my experience with the terminals, etc. So, today, I installed a gnome-3 advanced tweak or something along those lines (I forget the exact name already). This is software that is supposed to allow us to specify user-defined shells (not active yet), modify the terminal bars, etc. After installation, a menu bar came up, which allowed me to run the application. I ran it and it crashed.
Then I went to the applications section and started that job again and the whole system just froze, showing just a rotating wheel (as if a process is in progress). Nothing worked. So, I manually shut the system down and turned it back on again; and all I saw was that turning wheel and a small half-inch by half-inch square box (with just noisy colors). I then inserted my F15 installation DVD (the same DVD I used to install my OS), and started the machine; and the response is exactly the same as before: just that turning wheel with the noisy small square box. When I move my mouse around the wheel moves about in response. But, the system is just frozen.
View 2 Replies
View Related
Feb 11, 2010
I have not used ubuntu yet ; but would like to install the latest 9.10 version on an old Medion pc => Windows (XP) crashed and I bought a new Samsung HD to replace the old one.I found that most of the install "How To's" speak of using Windows to start a cd to install UBUNTU.But what can i do to install this latest version on a "free" HD?Nothing installed.
View 5 Replies
View Related
Feb 26, 2010
While upgrading from 9.04 to 9.10 using Alternate CD, the OS crashed. I had updated the 9.04 with latest updates and then started the upgradation to 9.10 using a Alternate CD. But after some time, the computer resarted and the screen displayed six line of 9.04 startup line. I waited for ten minutes but nothing happned.
What can be the reason and what should be done in that situation.
View 5 Replies
View Related
May 5, 2010
I was upgrading to 10.04 through the update manager and my pc froze during the install, and I mean dead stop. It's happened a few times since I've come home from college for the summer, but I thought it was just the game I was playing or something so I wasn't concerned.
Now when I try to boot it gives me errors mounting /media/1 and /media/2 and various other others regarding NTFS (yet linux doesnt use NTFS so I'm confused...). When I hit any button that's not a letter (Esc, Delete, Backspace, etc.) it flashes over to a screen that says 10.04 with 4 dots underneath. Similar to what the loading screen should be, yet obviously not the loading screen.
Is there anyway I can install/upgrade this system through a LiveCD or something similar? I can't boot to Linux at all now, but I can boot to the Windows partition on the same hdd.
View 5 Replies
View Related
Jul 21, 2010
A few months ago I did a clean install of the unbuntu desktop which I used to run an internal website. The OS was installed on one hard disk and two other hard disks I setup as a mirrored raid. Now when I start the computer I get a GNU GRUB commandline interface and I can't seem to get my installation up and running again. I've tried some of the suggestions for GRUB issues however I can't even get ls to work (gives me an error).
I am at the point where I don't really care about the OS installation but would desperately like to get the data off the raided disks and also a few files off the boot disk. I can't seem to work out how to do this using a liveCD, if I open the disk utility, select the raid and click "Start RAID array" I get a "Not enough components available to start the raid" error.
For the boot disk the major partition is a Linux LVM partition (and I assume the data I need is on that partition) however I cannot work out how to mount it. I really hope you guys can help me as the information is rather important.
View 2 Replies
View Related
Nov 11, 2010
10.10 crashed while installing. Error writing boot loader. I used to have 8.4 on another PC and decided to install 10.10 on this one but the install failed. The error message said a log was at /var/log/syslog and /var /log/partman: but if it didn't install, how/where can I access this log or get 10.10 to install?
View 2 Replies
View Related
Apr 28, 2011
I have installed ubuntu 10.10 and upgraded it fully, now when new ubuntu 11.04 came i pressed the upgrade button in the update manager. When download was complete then installation started... At the end of installation ubuntu crashed. Now i don't have it fully installed... Now i can't see desktop or anything.. I just have a Terminal... Is there any way how could i install ubuntu 11.04 missing part on with Terminal i have there.
View 9 Replies
View Related
Apr 29, 2011
I was minutes away from finishing my upgrade and the screen went black and the mouse stopped moving. I left it for about 10 minutes to see if it would recover but nothing happened. I had to restart and now I've got nothing, not even a terminal prompt. If I start normally, I get a blinking white cursor (I cannot type) that never goes away and if I try recovery mode It hangs.
View 1 Replies
View Related
May 6, 2011
I have run 10.04 for some time with no issues. I was presented with the system option to upgrade to 11.04. This I did but the upgrade crashed out halfway through the install process, with a 'too many errors to continue upgrade, system maybe unstable'.
On re-boot I am now presented with;
And the system waits for the selection.
So my question is - how to recover this ?
I can get to a shell (#) and see files on the drive (using ls) so I know the drive hasn't died.
View 3 Replies
View Related
Apr 28, 2011
So, I recently installed, or.. ermm.. Tried to install Ubuntu 11.04, I did it with a CD. This is about my 4th time around with Ubuntu, so I'm not completely new to it. But, I used to have Windows 7 on here, and I decided I wanted to go with Ubuntu, so I downloaded and burned the CD, and did all the stuff you need to do to install Ubuntu. I got far into the installation, and then the installer crashed saying something about an Input/Output error, and it could be the CD being dirty or damaged.
Now, I'm stuck with a broken operating system because I chose to replace my Windows 7 partion with Ubuntu, and there's no terminal! Everything else seems to be here, it's just really buggy, and I can't get much of anything installed.
View 9 Replies
View Related
Jan 9, 2010
i have new HP notebook with preinstalled windows and i'd like to have ubuntu too. But it's rather difficult. Long story:
First I wanted dual boot, Ubuntu on separate partition, but then I discovered that I have four primary partitions for windows. SYSTEM (I think nessesary for windows boot) c: (where windows is installed) RECOVERY (for restoring factory settings) HP_TOOLS (needed for right function of HP BIOS)
ok, what now? Windows partition tool let me create dynamic partition (not extended) but ubuntu partition tool can see only four partitions.
Then the wubi idea came. If I can't have dual boot wubi can be solution. But it failed too. Behavior is similar to
[URL]
that is installer say "extracting kernel" and few seconds later just close. Sadly I can't find log file (searching filesystem for word wubi and searching directory c:/users/hater/appdata/local/temp) to discover what's the problem.
View 3 Replies
View Related
Jan 19, 2010
i started upgrading ubuntu 9.10 and then the computer was restarted in office due to reset button pressed accidentally. when i started the machine, now the network manager is gone, and other printer connection is lost (samsung scx-4300) now we dont know how to repair since to complete upgrade i need internet connection which is missing due to this crash.can anybody help? i dont want to reinstall and loose all our settings, installed softwares and user info as well as printer setup etc. or is there anyway where i can just repair to previous version of ubuntu (restore to previous point) where things work as they were.
View 2 Replies
View Related
Mar 24, 2010
I was trying to upgrade to 10.04 (from 9.10 x86_64)when the update manager crashed without any warning or errors. it happened while the packages were being installed, as a result of which i could no longer login into gnome. so i logged in using the terminal and since i had cleaned the cache before upgrading i ran sudo -i dpkg *.deb (there were a large number of deb files in it, so i thought those were the upgrade packages) but the process couldn't be completed. it said that there were too many errors. after rebooting, gnome doesn't start and i can see lucid development version in the terminal. it also didn't detect my usb keyboard.do i have to reinstall ubuntu.
View 3 Replies
View Related
Nov 9, 2010
I was upgrading from 10.04 to 10.10 when my laptop crashed due to a HW issue not related to upgrade. But now when I start:
1) The laptop, it boots up till the point GDM log in screen is displayed without any log-in option. The system does not respond to any keyboard or mouse actions.
2) when I try to recover (recovery mode), the boot process comes til a point where it says "Console: switching to color frame buffer device 180x56"
And the prompt just stays there. It does not not drop to terminal. When I choose an older option in the grub, I do get dropped to initramfs prompt. How to restore my machine. re-instillation is not an option as I have some data I need in the home directory.
View 4 Replies
View Related
