I am a new Debian 6 user. I have Downloaded debian-6.0.0-amd64-CD-1.isodebian-6.0.0-amd64-CD-2.isodebian-6.0.0-amd64-CD-3.isodebian-6.0.0-amd64-CD-4.isodebian-6.0.0-amd64-CD-5.iso
View 14 Replies
After installing debian 5.0.4 basic from first dvd, I extracted all other dvd images to hard disk and pointed /etc/apt/sources.list point to all these directories.
after refreshing using synaptic package manager, I got list of all 20,000+ packages, and did a
"apt-get -y install ......(all 20,000 names)". It failed due to some conflicts. So I used "--force-yes -f " option as well.
It went on for nearly two days to install everything. (in between due to power failure, something was done half way and was able to login to KDE boot option and see lots of software installed.)
After complete install - it shows a startup screen of Debian EDu - but fails to boot up.
Is there a way to install all softwares + all XWindow systems simultaneously?
I have just installed Debian Lenny and was trying to upgrade the installed packages from the packages.debian.org site. when i asked synaptic to add the downloaded packages the would not appear, but when i checked the .xsessions file there are entries saying that the packages were being ingnored because they were either different versions, the MD5 did not match or even "can't find pkg". i have to use the local library to download the packages because i dont have an internet connection at home.
[Code]...
I am new to Debian and I am trying to apt to install some packages When trying to get tango-icon-theme it says: E: Package tango-icon-theme has no installation candidate And when trying to get arandr it says:
E: Couldn't find package arandr
What should I do to fix this?
After installation the Debian Squeeze when installing some packages the system asks for the installation debian CD. I wonder how i can change the configuration so that the system can install the packages without the CD?
View 4 Replies View RelatedI am tired of Microsoft Windows. So I am going to try Linux. I downloaded the ISO file and installed it. It did fine.My problem is I can't figure out how to install additional packages. Can someone tell me exactly what I need to type in to install packages from E: my CRDOM.Where can I download the complete GNOME DESKTOP package.Also, I am using Netzero Dial UP. Can you help me with this also.
View 4 Replies View RelatedFor about the last 24 hours I have been unable to install any packages with APT. A connection to ftp3.nrc.ca can never be established.
1) Is this a problem on my end, or is this mirror down?
2) Is there a way for me to (temporarily) change mirror?
Does Debian ship with Xen 4.0.1 installed? And if so what CD/DVD contains the packages?
View 1 Replies View RelatedI have face a lot of trouble to install packages in Debian 6 from CD and DVD . Is there is any way to install packages over internet ?
View 14 Replies View Relatedis there a way to choose packages when installing Debian? Normally I use min install but that still puts on many packages I don't want, is there some way of getting up a screen to select/deselect packages?
View 4 Replies View RelatedI have installed Debian Lenny from a 5 DVD set I purchased some time ago as well as packages I needed over time but now 'synaptic' refuses to recognize the first dvd as number one although when I try it, it boots normally for an install that I then abort.I'd like to install some packages directly from the Internet, can anyone explain what I need to do or point me to instructions, I do not have much experience with the command line.My current kernel is 2-6-26.21
View 4 Replies View RelatedI have fedora core on my PC and newly I installed Debian 5.3 on my lap top but found that it has not lots of manual pages for command and C or C++ libraries that fedora has. How can I install them
View 3 Replies View RelatedIf i want to install minimum gnome on debian with netinstaller,what would be the command? Is it correct? aptitude install gnome-core If i do aptitude install gnome-core,what packages would be installed on system?
View 2 Replies View RelatedI download and install the squeez beta2 netinst iso, now want to install the debian latest upgraded packages with apt, how i can do it?
View 10 Replies View RelatedI have a a few questions about Testing's update manager. When I go to the update manager I get a message saying "Do you want to perform a safe-upgrade, which does not remove packages or install new ones"? Will my entire system ever eventually get upgraded if I only ever do safe-upgrades? Or is there a time and a place to do non-safe upgrades? I did a non-safe upgrade a few days ago and all it did was mess with a bunch of OpenOffice packages.
Why are only certain packages selected by default when doing a non safe upgrade? Why is it that whenever I do a non-safe upgrade when it's done applying the updates the same packages I just installed are listed as available updates? Also, I used this website to build my sources.list and there apparently is some sort of "fatal error" with one of the repositories I selected. Is there a text file somewhere I can go to see a readout of apt-get bug reports?
How do I install software packages? I downloaded google chrome and I seem to be unable to install it. Can't find the appropriate program to open it with.
View 2 Replies View RelatedIs there any way to install .deb packages without giving root access?That it, I have root access, but I dont to give root access to the .deb package.This is for instance to install the .deb of SipderOak online backup took, or to install the .deb of openofficeWhenver available, I compile from sources, but sometimes only the .deb is available.
View 13 Replies View RelatedDuring the installation of Debian ( debian-8.2.0-amd64-CD-1.iso ) I couldn't connect to any mirror probably because the internet wasn't configured.
Thus, after the basic installation I wasn't able to install any packages ( trying to install sudo as root prompted me to insert the media disc - the USB drive I used wasn't detected going in an infinite loop ). Judging by the fact that I don't have a window manager installed.
I tried to install Debian 3 at my pc, and while it worked, it only installed the basic system. When it goes trying to install the "everyday-use" packages it cames with this message:Some error ocurred while unpacking. I am going tp configure the packages that were installed. This may result in duplicate errors or erros caused by missing dependencies. This is ok, only the erros above this message are important. Please fix them and Install again
View 8 Replies View RelatedI have been using linux for about a year and have run into a new problem I am unable to solve. It started when I attempted to install some packages I needed to get VirtualBox to run VMs. I am on Jessie.
I am unable to install various packages, including gedit, aptitude etc. I do not think it is a problem with my sources.list as my laptop has the same sources.list and I am not encountering the same problems on it. Packages will not install any dependencies. -f install isn't doing anything for me.
My sources.list...
deb [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb-src [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
[Code] ....
I tried to check for held packages with
userone@localhost:~$ dpkg --get-selections | grep hold
But get nothing.
sudo apt-get install -y
I'm attempting to install Debian (Stable) from a business net install disc. The problem? I can't load/install the packages I need to connect to my USB 3G modem. When I load up a shell (tty2?), I'm brought to an 'ash' prompt, and there's no DPKG for me to load the necessary packages.
how I can do a total net install, including the base, from an USB 3G modem? Actually, I'm very surprised that current Linux distros don't seem to include support, for this growing market share type of internet connection.
i did an install of squeeze without selecting anything during tasksel. after install i changed my sources to testing, updated, and did a dist-upgrade. i then installed xfce4 and xfce4 goodies. i noticed some of the xfce4 packages have the current state 'pa'. for example:
[Code]...
this makes me worry some things didn't install all the way, because if i did aptitude install xfce4-power-manager it would install it and leave make the current state 'i'.is there anyway to install all the packages labeled 'pi'?
Is there any way to install .deb packages without giving root access?That it, I have root access, but I dont to give root access to the .deb package.This is for instance to install the .deb of SipderOak online backup took, or to install the .deb of openoffice.Whenver available, I compile from sources, but sometimes only the .deb is available.
View 14 Replies View RelatedMy cache is full, and I've tried doing "apt-get clean" to no avail. I also can't find any apt.conf file in my system.Here is a screenshot of the error message that pops up when I open Synaptic Package Manager:PS: I'm pretty new to Linux, especially Debian; most of my Unix-like OS experience is with Mac OS X. My Musix installation is in a VMWare machine.
View 1 Replies View RelatedI am attempting to setup an ftp server as a first project to get me going in the world of Linux however when I run the command apt-get install proftpd-basic ....
View 14 Replies View RelatedI'm on Debian testing and every time I try to install Gnome I get this:
Code: Select all# alexandernst at stupidbox in ~ [18:51:07]
$ LC_ALL=C sudo tasksel install gnome-desktop --new-install
tasksel: apt-get failed (100)
I tried installing it manually:
Code: Select all# alexandernst at stupidbox in ~ [18:51:35]
$ LC_ALL=C sudo apt-get install gnome
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
Is this a problem in Debian repos (held packages) or I'm actually doing something wrong?
Upon installing Debian, it asked me if it can use a mirror to get updated packages. I said no, yet it ignored my command and fetched packages. Why did Debian disobey me?
View 12 Replies View RelatedCan anyone explain why aptitude install libgl1-mesa-dri actually removes a lot of packages? I just ran it without checking and the job was done...
aptitude install libgl1-mesa-dri
The following packages will be REMOVED:
bsh{u} bsh-gcj{u} gcj-4.4-jre{u} gcj-jre{u} libcolamd2.7.1{u}
libcommons-beanutils-java{u} libcommons-collections3-java{u}
libcommons-compress-java{u} libcommons-digester-java{u}
libcommons-logging-java{u} libdb-je-java{u} libdb4.7-java{u}
libdb4.7-java-gcj{u} libgcj10-awt{u} libgraphite3{u} libhsqldb-java{u}
code....
On Debian repo I found virtualbox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
View 3 Replies View RelatedI am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386
-libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
