I'm using an nvidia geforce 9500 gt with the nvidia kernel module.
The manual clocking in nvidia-settings works the manual fan speed
too but only between 35 and 100.
Got coolbits 5 in my xorg.conf file.
Anyone got a way to set the fan speed below 35?
summary: `sudo aptitude full-upgrade` (to jessie) ran long time before hanging @
Code: Select allSetting up fancontrol (1:3.3.5-2) ...
Installing new version of config file /etc/init.d/fancontrol ...
[ ok ] Stopping fan speed regulator: fancontrol.
Killing the job produced damage detailed below. How best to proceed?
details:
I'm upgrading a 7-year-old 64-bit Clevo/System76 laptop to jessie. My first run of `sudo aptitude full-upgrade` ended after fetching packages, with the following lines ending the console spew:
Code: Select allGet: 2051 http://http.debian.net/debian/ jessie/main user-setup all 1.61 [196 kB]
Fetched 1,816 MB in 17min 38s (1,715 kB/s)
E: This installation run will require temporarily removing the essential package python:amd64 due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
E: Internal Error, Could not early remove python:amd64 (2)
So I started a second run with `sudo aptitude -o APT::Force-LoopBreak=true full-upgrade`. I left it running overnight, checking back periodically to OK overwriting `/etc/*` files with package-maintainer's versions. Friday I checked the box ~0900 and found
Only GUI application running was `gnome-terminal`, with the upgrade running in a single tab. This was working as intended, since I closed all other apps, and all but one `gnome-terminal` tab, before starting the upgrade. desktop environment (DE)=Cinnamon (also as intended) mouse was non-responsive: swiping the touchpad produced no movement keyboard appeared non-responsive (but more on that below) internal fan was running apparently full-speed (certainly as loud as I've ever heard it) console spew ended with the following 3 lines:
Code: Select allSetting up fancontrol (1:3.3.5-2) ...
Installing new version of config file /etc/init.d/fancontrol ...
[ ok ] Stopping fan speed regulator: fancontrol.
I left it running in hope the upgrade would recover, but after 7 hours nothing had changed, so I attempted to kill the job. The following all failed:
invoking shutdown via desktop menu (neither mouse movement nor pressing Super key produced any change) C-c/Ctrl-c in the terminal tab (nothing changed in the GUI) A-F2/Alt-F2 (trying to run another `gnome-terminal` to run `sudo shutdown -Ph now`, but no dialog appeared) C-A-F1 (to goto tty1 and run `sudo shutdown -Ph now`, but again no change in GUI/X)
The good news is, the box did reboot after `A-SysRq-[REISUB]`, though only to tty1. From there, `sudo dpkg --audit` produces these results.
So obviously the upgrade is incomplete; how best to resume it, or to debug the current situation before resuming? I'd prefer to fix the problem with `fancontrol` before proceeding, since the previous `full-upgrade` was quite long-running.
FWIW I also recorded the packages that the previous/broken `aptitude full-upgrade` wanted to {add, remove, upgrade}, and note that package=`fancontrol` is one that `aptitude` wanted to upgrade. So I'd like to know if I should just
Configure unpacked-but-not-yet-configured packages as directed by `dpkg --audit` reconfigure only-half-configured packages as directed by `dpkg --audit` process triggers for packages awaiting processing of triggers as directed by `dpkg --audit` reinstall packages missing md5sums as directed by `dpkg --audit` create a list of packages to remove (from those listed in the previous upgrade) add `fancontrol` to that list run `sudo aptitude remove [list of packages]` from tty1 create a list of packages to add and upgrade (from those listed in the previous upgrade) delete `fancontrol` from that list run `sudo aptitude install [list of packages]` from tty1 rerun `sudo aptitude full-upgrade` from tty1 (hoping that cleans up any remaining upgrade work, and does not try to reinstall package=`fancontrol`)
Yesterday I've installed Debian 8.1.0 on my desktop pc. I'm using Nvidia GT 730. After booting, the GPU fan runs at very high speed and really gets overheated. I didn't install any drivers etc.
Is there a solution for this or do i have to switch to Intel/ATI to use Linux? I said Linux, because every distros i've installed makes Nvidia chipset overheated and the fan runs at max. speed.
I'm terrified about making the GPU burnt.
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I'm running openSUSE 11.4 with GNOME. I have an EVGA nvidia GTX 285 installed, which is equipped with a variable speed fan. I'm running the nvidia driver package which includes the nvidia X Server Settings utility. The utility allows me to view the fan speed as a percentage of its maximum speed but does not allow adjustment. It appears that the speed remains at the card default of 40% regardless of GPU or card temp. When running certain graphic-intensive applications my card runs quite hot (sometimes >70 degrees C). Although this isn't hot enough to burn the card up in the short term, it is certainly hot enough to shorten my video card's lifespan.
So, the question is how do I set up my system so I can increase the fan speed to 50% or better yet, get it to increase as the GPU temp increases? The nvidia X Server Settings help indicates that fan speed is adjustable after enabling coolbits, but coolbits is not installed on my system and is not available from the default repositories. What is the easiest way to obtain, install and enable coolbits? I have no intention of overclocking my card. It was too expensive to risk damage to the card.
I'm running a XFX Nvidia GTS 250 512MB card. I have installed Ubuntu 10.04 and so far I'm loving it - apart from one small issue. Using 195.36.24 drivers, I cannot control the fan speed - it keeps running the card pretty hot - hitting 75 deg. C when one OpenGL game is running. The fan barely goes over 60% speed - I'd rather have it run at 80% constantly to keep the temps under control.
There are drivers on nvidia website which "seem" to be a lot newer : 256.35 (using 64bit Linux) - are those "direct replacement" for the 195.36 which Ubuntu installs by default?
I have a well ventilated case (1x120mm pulling air, 1x120mm pushing out, neat cabling, etc). I have found nvclock but no joy - even with -force it doesn't want to change fan speed.
I just bought a new router with gigabit ethernet.
However, my HTPC running Ubuntu 10.04 (32 bit) with a Zotac ION mainboard can't obtain gigabit speed. I have tested the cables by connecting my laptop and it gets gigabit speed. I also have a desktop computer that obtains gigabit speed in my network, this one with another Nvidia chipset and Linux Mint 11.
I have tried to boot the HTPC with Linux Mint 11 LiveCD, but it fails to get gigabit as well. I have also tried
Code:
sudo ethtool -s eth0 speed 1000
but it does not succeed in chaingin the speed.
Is there anything I can do to get gigabit speed? I have all my files on the HTPC, so network speed is important!
Here's some info that might be useful:
Code:
christian@htpc:~$ dmesg | grep eth
[ 1.243230] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.244597] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[Code].....
I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...
View 2 Replies View RelatedUsing online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
View 1 Replies View RelatedI expect to check the RAM speed and type. I ran following command;
$ sudo dmidecode 2.9SMBIOS 2.5 present.
65 structures occupying 2385 bytes.
Table at 0x000F06E0.
Handle 0x0000, DMI type 0, 24 bytes
[Code]....
i both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
View 5 Replies View RelatedI am experiencing the slow transfer speed from my Lenny to Windows 7. Both of my NIC's are oboard Nvidia nForce 1GBPs. For example 200MB transfer from Win to Lenny (default samba shares) takes about a minute, while the other way around takes an hour!!!. I get similar transfer behavior through sFTP.
Can somebody clarify if the problem is in NIC drivers, MTU (I can't set it up higher than 1500), or smb.conf settings
I have a 500gB USB drive connected to my laptop for backups and filestorage. But I can't get it to play nice with Midnight Commander. My transfer speeds max ut at 2MB/s wich is painfully slow when moving large files such as movies. Worker FM transfers the same files to the same drive much MUCH faster (not sure by how much, though). This leads me to the conclusion that the problem lies with MC.
View 5 Replies View RelatedI wanted to play with Kali Linux, so since my T430 has two USB 3.0 ports I bought a USB 3 thumb drive and put the image on it.It boots fine and all, but I recently read that the T430 downgrades the USB port from 3 to 2 when you boot from a device connected to it.I followed instructions here: URL...
Code:
Select allroot@kali:~# dd if=/dev/zero of=./largefile bs=8k count=10000
10000+0 records in
10000+0 records out
81920000 bytes (82 MB) copied, 0.0670296 s, 1.2 GB/s
root@kali:~# sh -c "sync & echo 3 > /proc/sys/vm/drop_caches"
[code]....
I am running Debian Squeeze with 2.6.32-5 amd64 kernel with GCC 4.3.5 (the same one used to build the kernel) installed. I have a nVidia GTX 470. I'm trying to install the latest nVidia drivers (260. ...). I've never installed noveau or any other open source nVidia driver. Here's what I've been doing:-Change the "Driver "nvidia"" line in /etc/X11/xorg.conf to "Driver "vesa""-Restart system in single user mode as root, no services running-cd to the directory with nvidia-Linux-x86_64-... .run (what I'll call nvidia.run)-enter "sh nvidia.run --uninstall"-enter "CC="/usr/bin/gcc-4.3" && sh nvidia.run"It starts up and it compiles the kernel 100%. Then it says this:
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
[code]....
Is it possible to control the speed of the CPU fan in my desktop computer? The CPU runs cool at 30C yet the fan sits around 2700rpm and the BIOS doesn't allow for speed control.
View 4 Replies View RelatedI have a multiboot system with Windows Seven and Debian Squeeze installed.
When i run Windows, the fans in my PC work silently, but when i run Debian they making extremely terrible noise (looks like they working at full capacity).
I have 4 fans in my chasis, 1 CPU, 1 GPU and 1 PSU, 7 total.
I am using debian(lenny) on a pc coexisting with windows. I use grub to decide which o/s to boot.
I picked debian, logged in as a regular user. I selected "Administration" under the "System" tab and then selected "Update Manager". I had to provide the root password.
I was asked to insert Binary DVD-1 and was told to use smart update. I did at which time 16 files begun downloading at between 4400 B/s and 4800 B/s from the Security server. It looks like it is downloading a new linux image.
Is there any way to speed this up?
I currently have debian installed dual booting with windows 7. Whenever I go to speedtest.net I ger over 20mbs with windows 7 and .098mbs with debian and ubuntu can wnyone tell me what is going on. I called AT&T Uverse and they said that I had over 900 file sharing sessions still open and that is what was causing the problem so they reset my network gateway for me ad we tried again, same thing debian low ethernet speed windows 7 very high ethernet speed can anyone help me out with this
View 4 Replies View RelatedWhat is the usual download speed for updates to the Debian system using the update option under the Administration tab? I am just getting 4700 B/s, but have 5 Mb/s DSL. Is this due to overload of Debian website?
View 5 Replies View RelatedHow to verify that Debian is running at 100 Mbps or 1000 Mbps? I can view the report from 'ifconfig eth0' but I can't see how fast the link has been established.
View 2 Replies View RelatedUsing Openshot, flowblade, or Kdenlive, when video gets rendered into mp4, it comes out at increased speed, both audio and video (seems like double speed but could be a different ratio)
When I play the exported mp4 with VLC for example, it shows the proper video length, not shortened. The video plays at high speed and for the second half of the video it just shows the last frame of the video until it runs out of time.
I have used Openshot extensively and have never had this problem, so I installed all the other video editors I could, and the problem persists (pitivi has a dependency problem so I haven't been able to use it).
I have tried several video players as well, all doing the same (VLC and Smplayer)
I am running Debian stable jessie, 64 bit, xfce
Code: Select allcpu:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
            AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
            AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
            AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
            AMD A6-3670 APU with Radeon(tm) HD Graphics, 800 MHz
[Code] .....
I mount a BD-RE in Debian Jessie to write about 20GB of data. But the writing speed is terrible slow. I get a Speed of 250kb/sec.
Are there any options to increase the speed of writing? I don't use packet writing and no wodim, no growisofs, nothing. I just mounted the disk and I use mc (Midnight commander) to copy the data.
Skip to last post for most relevant information.
View 8 Replies View Related1 - I got the array up and running on three Seagate 1.5TB HDDs, filled it up in 6 months (mostly by putting all of my stuff in one place)
2 - Unknowingly, I bought a WD15EARS HDD, partitioned it as I would any normal drive and asked mdadm to grow my array over to the new partition
3 - Worried by abysmal read/write speed, I investigated, found out how to deal with the new HDD ( here or here )
4 - Being a newbie at this, I opted to do a trial run before wiping the disk and unmount/mount the partitions, LVM layers, SW RAID array. This is there I messed up.
[Code]...
I got a new machine with GA-p55A-ud3 mobo and a WDC WD10EARS 1T disk.
When I tried to benchmark the disk IO, I was suprised by the low write speed:
The related output from my lspci:
The related output from my lshw:
I got a new machine with GA-p55A-ud3 mobo and a WDC WD10EARS 1T disk. When I tried to benchmark the disk IO, I was suprised by the low write speed:
[Children see throughput for 1 initial writers = 35962.63 KB/sec
Parent sees throughput for 1 initial writers = 35962.63 KB/sec
Min throughput per process = 35962.63 KB/sec
[code].....
I have a Compaq 8710w and after upgrading to the latest Debian/testing (Linux version 4.1.0-1-amd64)the fan runs at full speed all the time. There seems to be something strange with the temperatures reported by temp4, it is stuck at 100 degrees.:
Code: Select allroot@...:~# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:    +16.0°C (crit = +105.0°C)
temp2:    +38.0°C (crit = +105.0°C)
temp3:    +22.6°C (crit = +110.0°C)
temp4:    +100.0°C (crit = +110.0°C)
temp5:    +37.0°C (crit = +110.0°C)
[code]...
I found this related problem: URL... . Note that here the problem is that the fan does not spin and that temp4 reports 0 degrees.