I've configured WLAN with WPA2-PSK on my notebook EEE PC 1000H from Asus with Lenny.
I'd like to configure wireless interface in /etc/network/interfaces to switch from WPA2-PSK to a free open WiFi hotspot and back to the default WPA2-PSK if needed. code...
I am trying to connect to a paid for hotspot service. There is no encryption for the wifi.
In Windows you connect to the hotspot, and then any webpage that you attempt to connect to results in you being redirected to their login page.
Once you have put a username and password into their page, the internet works. I know the hostname and IP address of the login page so actually I can go straight there if necessary.
With Debian I have tried Network Manager, WICD and command line iwconfig and dhclient.
With Network Manager or WICD the connection just will not start. It seems to connect to the hotspot then immediately fall off before you can go to the login page.
With iwconfig and dhclient I get mode Managed not-associated. Sometime dhclient seems to return an IP address sometimes not. I'm not sure if it's because it already has an address in it's lease lifetime.
I think that dhclients sends a ping once the connection is up to verify the link? But this will not work until the page is logged into.
Windows "just works" even warning you that you need a login page and then loading it. How I can use this wifi service with Linux?
I've just installed Debian Squeeze on my eeePC 4G with the NetInstall iso and I plan on having the OS in text mode only (Ok, I'm not sure how strange that sounds to some of you). So I'm looking for command line apps to run and was wondering if there was one that would make this any easier...?ifconfig wlan0 upiwconfig wlan0 essid $essidNamedhclient wlan0I could just turn it into a script, but it still wouldn't handle hotspots with passwords. So, anyone know of a nice little app that would take care of this?
View 6 Replies View RelatedRecently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
I can connect to my home WiFi connection with no trouble at all.
I can't connect to a free public WiFi (like at a library).
I occasionally stay at hotels where I get free wired internet but not wifi, I'd like to use my laptop as an access point so that I can have internet on my Ipod Touch. I know it's possible because after trying unsuccessfully in Ubuntu 9.04 a few times I decided to try it with windows vista and it took me a matter of seconds and both the laptop and ipod touch were surfing the internet. I'd prefer not to boot into windows just for this.
In ubuntu when I create a new wireless network, network manager shows that I'm connected to both the autoeth0 and the wireless network I created but neither computer has internet access.
ubunut 10.04, does anybody know how i can turn my ubuntu laptop into a wifi hotspot?
View 1 Replies View RelatedI've got an Ubuntu box set up as a router and wifi hotspot. I can access the internet and any website using this box. I can connect a laptop to my wifi access point, and connect to both the router box and the internet. I'm writing this message from it. If I access either hsbc Hong Kong internet banking or speedtest.net from my laptop I can't connect. Every other site I've tried is fine. What could be causing this? I don't know where to start. I've set up the firewall rules and routing tables, so I vaguely know what I'm doing... but clearly not enough to debug this issue.
View 3 Replies View RelatedI have two computers:
- one is my desktop, running ubuntu. it has two NIC's one is wired (eth0), the other is wireless (wlan0).
- the other is my laptop, running archlinux. two NIC's as well (eth & wlan).
I would like to connect my desktop to my router via eth0 and connect my laptop to my desktop via wlan0, providing internet access to my laptop. i would like both computers to be able to use the internet simultaneously (not all packets would be forwarded).
Any manner of doing this would be ok, but if this is a simple enough task to do it by simply configuring some files (e.g. /etc files) rather than installing some unnecessarily big application, then that would be wonderful!
Also, not really as high a priority but if possible, i would like this to perhaps not be limited to my laptop. connecting any device (a psp or pda for example) to the internet this way (making it a hotspot in a sense) would be super! encrypting the connection (WEP for instance) would be ultra-mega!
Miscellaneous info:my desktop uses dhcp to connect to the router.
I often connects my laptop (Asus EEE) to my HTC desire hd with the wifi hotspot. But this doesn't work since yesterday when I upgraded to 11.04. When I connect the laptop to the phone the screen on the laptop goes black with a lot of scrolling text then it freezes.
This worked out of the box without any problems with 10.10.
I'm travelling currently so the last network i connected successfully to was my home wpa-psk network. I hadn't tried anything until i got to my accommodation that is an open network (that I'm on now on the Win7 partition on my laptop).
The network (and a similar archetypical 'linksys' open network, aswell as some protected local networks are correctly displayed in network-manager and upon selection, it happily spins around to its hearts content for a while before saying 'no chance boy'.
/var/log/syslog spills out the usual combination of wpa_supplicant and kernel messages, the most interesting of are that the kernel deauthentication reason 6 response. 6 apparently means class2FrameFromNonAuthStation...Client attempted to transfer data before it was authenticated.
Anyone seen anything like this? I've already tried going closer to the router to no avail. I don't remember seeing this any other time I've connected to a open AP, even if that AP is far away. (Signal strength for this AP is good, kismet says its around -57dBm, well above the threshold of -80dBm, and I've tried all the suggestions from the 'Related Questions' code...
I have no problem with my wireless network at home, or visiting friends, but it won't connect to public, open, unsecured WiFi networks, eg hotels, trains, ships.I'm using Ubuntu v9.10, NetworkManager applet v0.7.996, on a Dell Inspiron 1750 laptop.If I left click on the NetworkManager, the available wireless networks are displayed and I can see the relevent open networks, named as expected and shown without the lock icon. I click on the relevent entry, watch a spinner for 30 seconds or so and then it drops off and I have no connection. This happens for "all" open connections.If I look at my defined Wireless Network Connections now, I can see, eg, "Auto Internet@Sea, Last used: never". Editing that connection:
[Wireless]
SSID: Internet@Sea
Mode: Infrastructure
[code]...
im wondering if there is something like [URL] that would allow me to automatticly connect to first open wifi with internet for linux.if no, would it be hard to write a program that would do that for me?
View 1 Replies View Relatedno more open wifi -- fire sheep make hacking open wifi a breexe.starbuck and Micky d's are open to the fire sheep.
View 3 Replies View RelatedI have the weirdest problem on the newly (freshly) installed Natty on my Acer Aspire 5741G: Wifi connectivity is good out-of-the-box and can connect (at least with my office's network) but cannot connect with my phone's (HTC Legend with Froyo) configured as a portable hotspot.
The network can be detected, but fails to connect. I have tried with WPA, without any security.... it all does not work.Previously Lucid 10.4 connected flawlessly out-of-the-box on the same machine.Other devices detect and connect to the phone without problems.
I am attempting to connect to an unsecured wireless network; I helped set it up for my local club with a local ISP. Once things were up and running I took my wife's laptop running Ubuntu 8.04.3 and Wicd. Can see the unsecured network no problem, good signal, hit connect, whirs away for awhile, then: 'Unable to obtain IP address.' Strange. I am about to give up and report back to the ISP when I think I might try one of the old Windows boxes in the computer room. Spots the network, hit connect, online, no problem.
So Windows connects fine, Ubuntu box can't get an IP though no doubt the router is trying to serve it one.
I am a very new user to Linux and Debian. I tried to use the Live version, but there is no internet connection. How do I connect to Wifi in Debian Live?
I use Asus laptop with Intel i7-3517U CPU. Other Linux distros work fine with wifi.
I have installed network controller driver(iwlwifi) in debian jessie and connected to wifi, but I could not connect to any web sites. I installed network-tools and input "iwconfig" it did show a wlan0 there.
Then I opened resolv.conf ,but there were 2 resolv.conf in my /etc,one contains "search lan nameserver 192.168.199.1",one contains "nameserver 8.8.8.8 nameserver 8.8.4.4".
I changed the content of the first one to 8.8.8.8 and restart networking,but I still could not open pages with wireless network.
And I open the first one again,and it changed back to 192.168.199.1,and an extra line "domain lan"above the line"search lan".
i wish to install hotspot shield so help me to install hotspot shield & send me the link of software hotspot shield.
View 3 Replies View RelatedI did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.
I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:
Code: Select all# The loopback interface
 auto lo
 iface lo inet loopback
Shouldn't there be something like wlan0 there? The network card does show up with lspci
i just installed debian on one of my cvomputers that is more than 20 away from the wirless router router in the house and i can't get it to connect to thew internet via wifi i did this i went into system>administration>network and i sawmy wirless card and enabled it (a progress prompt came up for about 5 minutes) then i clicked properties and entered all of the information about my wirless router (i thought it would've scanned the area for any wirless ap) then i clicked okay and no dice, i went into the web browser and i get an error. what did i do wrong? how do i make it connect to the internet via wirless i have 2 wireless cards connected to this computer (sometimes linux doesn't kije the internal one so i connect the usb wirless card that i got)
View 14 Replies View RelatedI bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.
The output of iwconfig is
wlan0 IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9
[code]...
I am trying to set up a wireless 'test' box to use on a private club (11,000 acres). The initial tests won't need anything fancy, it will just be checking the visibility of a hotspot from a high-point in the middle of the property. But if it proves to have good visibility, later tests will be (hopefully) promoted by the club and made aware to members. I would like to set up a captive portal to redirect them to a comments page where they can post a quick message if they were able to connect ....
Most of the examples I see online of captive portal are based on having an internet connection and/or a NAT scheme set up. I just need a hotspot and a single web-page for these promotional tests. If possible, I would like to trigger any devices capable to suggest or otherwise open a browser to go to the promotional landing page ...
Also, one more quick question, this is to eventually be an 'open' internet for this test - most of the wpa set-up examples show using a passkey. Is making an open wifi as simple as not including the passkey or is there something else I would need to be doing?
I just freshly installed Jessie on my Dell Inspiron 5110, I configured the network on the installer and had no problem. I can browse the web, get updates and install software.
But I can't find new networks. It just show "No Networks".
lspci -vnn
Code: Select all09:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34)
  Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5325]
  Flags: bus master, fast devsel, latency 0, IRQ 55
  Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]
[Code] ....
What input should I post?
During playing around sources, synaptic playing I messed up the default list. I know I should have been more careful. Anyways could someone tell me what the default the default sources.list that has free and non free etc for squueze please? I have been trying to get the default list but I cannot find it anywhere. There are alot of lists out there but nothing tagged like the "default" list.
View 6 Replies View RelatedI have a Dell 1505E with Debian 3.16.7 which is unable to connect to channels 12 and 13 even after changing wifi regional settings to different countries (using iw reg set).12 and 13 are legal to use in the UK. What should I do?
Code: Select allsudo lspci | grep -i wireless
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Code: Select alllspci -vv -s 02:00.0
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
  Subsystem: AzureWave Device 2047
 Â
[code]....
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I have a problem activating the hotspot on my debian 8. The issue is that I can't activate the hotspot to give other devices wifi connection.
I have the correct driver packages from the non-free repositories (firmware-realtek) and this service (hotspot) worked fine on distros like Ubuntu, Mint and Fedora .
I tried hostapd but it didn't work. I'm using cinnamon desktop.
I'm trying to install the openconnect VPN client on a server machine, Debian 7 Wheezy, and APT is trying to install a lot of dependencies. I think it's trying to install the whole desktop environment.I was searching the web but all articles are for desktop machines and nobody mentions my problem with the dependencies. I also have openconnect installed in two Gnome desktop machines without problems.
This is the output:
Code: Select all# apt-get install openconnect
Reading package lists... Done
Building dependency tree   Â
Reading state information... Done
[code]...
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View Related
