Running Debian Squeeze and when I try to switch between gnome and a system terminal ctrl-alt-f1(etc) I just get a black screen. Any thoughts? I'm using the radeonhd xorg driver but don't think that should affect it.
View 14 RepliesI just installed Stretch on my laptop and I have a problem with the terminals. The system loads fine on KDE and I can use it without issues. However, when I switch to the tty terminals, they move very fast horizontally and slowly vertically as if there is some sync frequency issue. Then if I move back to KDE most of the time it works ok, while some others it starts flickering like the terminals.
View 4 Replies View RelatedI'm building a Debian Live system, [URL], and I've pared it down to a very light distro. It is using the IceWM, has the basic linux commands, and very very little else.
When I run "top" and "ps aux", I see that I have multiple terminals and logins waiting to be used. It's a small amount, but I'd like to make that RAM usable elsewhere. The indicated commands are: "/bin/login -f" and "-bash", and I have one of each associated with each tty[1-7]. I may want to keep tty1 and tty2, just in case, but I can't imagine wanting 3-7.
So, what I'm looking for is a way to stop tty[3-7] from even starting in the first place.
I saw on one forum the suggestion of modifying the /etc/init/tty[1-7].conf files, but these files aren't present, I presume because it's a "Live" system.
I've updated to the backported kernel image, and lo and behold new problem:
mount:special device /dev/cdrom1 does not exist
I've looked in fstab and indeed the writer is there and /dev/ only has my other 2 drives cdrom1 and cdrom. i can trace them back to sr0 and sr1 but, there is no sr2, or anything else to find out what my drive is called. what can i do to find out?
Edit: booting under the old kernel image see's them recognized as hda, hdc, hdd. image 2.6.26, the backport is 2.6.32
When trying to do a system update, I'm facing following error:
Code: Select allroot@machine: apt-get upgrade
Reading package lists... Done
Building dependency tree   Â
Reading state information... Done
The following packages have been kept back:
 libdevmapper1.02.1
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
[Code] ....
No such file or directory of an older and unused kernel? What's wrong with my system?
More about my machine, which runs Debian 6:
Code: Select allroot@machine: uname -a
Linux machine 2.6.32-5-686 #1 SMP Sat Jul 12 22:59:16 UTC 2014 i686 GNU/Linux
Code: Select allroot@machine: cat /etc/apt/sources.list
deb http://http.debian.net/debian/ squeeze main contrib non-free
deb-src http://http.debian.net/debian/ squeeze main contrib non-free
deb http://security.debian.org/ squeeze/updates main contrib non-free
deb-src http://security.debian.org/ squeeze/updates main contrib non-free
deb http://http.debian.net/debian squeeze-lts main contrib non-free
deb-src http://http.debian.net/debian squeeze-lts main contrib non-free
I seem to have a major discrepancy between what df reports and what du reports. df tells me that I am using 20G, but I am only able to find 9.5G using du. What follows are the ls -l of root, a df of my system, and the du for every directory in root that is not a symbolic link, mnt, or proc. I would appreciate any suggestions on where to look for the remaining 10.5G that seems to have disappeared.
I am running under VM Player code...
I'm new to the forum and actually to Debian as well. Have been running Ubuntu for the past few years. Just setup a small Dell laptop to use as a Squeezebox and Print server. It's been up 6 days without a hitch as far as serving music to the squeezebox and printing. The problem is that it loses it's static IP, so as long as I look it up and change the radio Squeezebox and printer definitions around on the clients everything keeps working.
Does anyone have any ideas?If the connection drops for some reason and the system has to re-initialize the connection, shouldn't it use the /etc/network/interfaces file and get back to the static IP that it is configured for?If anyone has any ideas of why this could be happening or have a solution, I would really appreciate the help.
I switch between terminals using the combination of keys Alt+Fx (x=1... 6). I get only 6 terminals.
How can i get more than 6 terminals?
The issue is I screw up my smb.conf by SWAT and I want now the default configuration with all comments back. I try:apt-get remove --purge samba > it leaves the default configuration in samba/ directorythe other way is to download source package....apt-get source sambaIs there some other quicker way how to get the default smb.conf file back?Yes but on Debian 5.0:I uninstall samba.Remove samba/ dir.Install samba.I'm unable to bring up nmbd daemon UP - missing samba/ dir with smb.conf. I create samba/ dir with smb.conf and nmbd is fine!
View 2 Replies View RelatedGoogle brought me no love on this one, tried searching here with little luck as well. So I'm hoping somebody vastly more experienced than I can shed some light on my plight.
The situation:
I have a CentOS 5.3 x64 server running the latest cPanel which works fantastic. I issued a graceful reboot and the server came back up (according to the DC) just fine to a login prompt. Apparently the system lost all of its IP address configuration. Primary IP, secondary IP's gateway, you name it and it was gone. Now my secondary IP's were showing in cPanel after I had the DC re-enter my main IP address/gateway. But listed as not active due to the fact that they were not anywhere to be attached to the interface. i.e. eth0:1 eth0:2 etc and so on.
I have no idea where to begin looking for this problem and am afraid to reboot it again (at least until I get my lantronix spider up there). I've never experienced this with any of my other CentOS/cPanel servers either. All similar configurations CentOS 5.3 x64, latest cPanel as well. My hardware is all Supermicro gear as well and has been solid in the past.
Maybe I'm just missing something, granted I've only been managing Linux based servers for about two years now. This is actually the first real problem I've ran into on any Linux distro, they are normally pretty solid. So I assume it's a configuration error on my part somewhere.
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies View RelatedA week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies View RelatedI'm not sure if this is the right spot for this pst or not, first on this forum. I just removed Fedora Core 4 from my system and installed Debian Sarge with the 2.6 kernel. I'm a newbie. The install seemed to go fine, after it was done I actually logged in and looked around some. I then restarted to check to make sure that my boot process went ok and I could still get to windows. Worked fine. Then I tried to boot back into Debian. It hung. I rebooted and tried again. Hung again in the same spot.
View 1 Replies View RelatedI use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
View 1 Replies View RelatedI am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):
[Code]....
The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?
View 4 Replies View RelatedTo configure SMS gateway using Kannel configuration for Huwei GSM Modem
dmesg gives attached modem in my system:
I have a problem with the configuration of the NS zone. Looked through the logs, and there:
Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/db.domain.pl:1: no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone domain.pl/IN: loading from master file /etc/bind/db.domena.pl failed: no owner
[code]....
I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
I have a web server running and wish to get a mail server running on the same machine. I have a registered domain name. I have postfix and dovecot installed. I can send emails from the server to my normal address on a different domain but cannot receive mail. I can send and receive mail locally with no problems. I just don't know where to look for the problems. If you need any more info ( config files/doamin names etc let me know)
View 5 Replies View RelatedI recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
I have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020
of the same hard drive for core.img, core.img is at this location on
/dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
I firstly open one terminal. Then I try to open another terminal window through application list, but the terminal I opened beforehand turns up. I can open several terminals at the same time in Ubuntu, how can I realize the same function in Fedora?
View 5 Replies View Related