Debian Configuration :: TTY Terminals Flickering
Aug 19, 2015
I just installed Stretch on my laptop and I have a problem with the terminals. The system loads fine on KDE and I can use it without issues. However, when I switch to the tty terminals, they move very fast horizontally and slowly vertically as if there is some sync frequency issue. Then if I move back to KDE most of the time it works ok, while some others it starts flickering like the terminals.
View 4 Replies
ADVERTISEMENT
Feb 22, 2010
Running Debian Squeeze and when I try to switch between gnome and a system terminal ctrl-alt-f1(etc) I just get a black screen. Any thoughts? I'm using the radeonhd xorg driver but don't think that should affect it.
View 14 Replies
View Related
Jul 6, 2011
I'm building a Debian Live system, [URL], and I've pared it down to a very light distro. It is using the IceWM, has the basic linux commands, and very very little else.
When I run "top" and "ps aux", I see that I have multiple terminals and logins waiting to be used. It's a small amount, but I'd like to make that RAM usable elsewhere. The indicated commands are: "/bin/login -f" and "-bash", and I have one of each associated with each tty[1-7]. I may want to keep tty1 and tty2, just in case, but I can't imagine wanting 3-7.
So, what I'm looking for is a way to stop tty[3-7] from even starting in the first place.
I saw on one forum the suggestion of modifying the /etc/init/tty[1-7].conf files, but these files aren't present, I presume because it's a "Live" system.
View 5 Replies
View Related
May 28, 2011
i always had problem with my ATI card and Gnome GUI i decided to install Debian without any GUI at all. After login in CLI i used those commands:"apt-get update""apt-get install alsa-base xorg kdm kde gtl-qt-engine" .I decided to manually install KDE because i had no problem with it in Open SUSE. After that I restarted my pc and got flickering login screen, I'm unable to swith to console becasue after hitting ctrl-alt-F1 I'm getting black screen. I searched google but with no luck, and if there was some solution it required you to be logged in into GUI.
View 14 Replies
View Related
Apr 10, 2010
I switch between terminals using the combination of keys Alt+Fx (x=1... 6). I get only 6 terminals.
How can i get more than 6 terminals?
View 3 Replies
View Related
Dec 22, 2010
I updated my system as usually. Sadly since then my screen flickers every 10 (or so) seconds. It turns black for like 10ms and then back to whatever it showed before. This behavior occurs after some uptime. Haven't measured the flicker-free time span yet but I guess it starts after 15 to 30 minutes.I'm using a up-to-date Squeeze with KDE4 an the nvidia-driver for me GeForceGo. Interesting thing is: It does not flicker while using fluxbox using same xserver.
View 1 Replies
View Related
Aug 16, 2014
I installed debian 7 with lightdm and MATE 1.8 (from backports) on a new PC.
Since the first day the mose keeps disappearing. For example when I click on something, the mouse disappears and only comes back when I move it. Sometimes it already disappears when hovering over a button (especially annoying when it happens while you try to resize a window).
That problem did not happen for example in LXDE, which I installed just to test that.
I did install MATE 1.8 on several laptops/PCs so far, never hat that problem. Maybe it's because of quite recent hardware?
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Device 041e (rev 06)
View 12 Replies
View Related
Sep 26, 2015
I found a nice old mini industrial PC with an Jetway NF92 motherboard (Atom N270/Intel GMA945 GPU).
Installed Jessie on it, I have a strange problem under X11: mouse pointer is garbled (looks like somebody cut the arrow in four separate sprite and shake them well , and screen flickering. If I move down the mouse in the lower part of the screen, the screen flicker slowly, if the mouse goes in the top part of the screen, screen flicker rapidly... And finally, putting the pointer on the last line of the screen make the screen stop flickering with perfect screen....
Code: Select allroot@telmat:~# uname -a
Linux telmat 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) i686 GNU/Linux
root@telmat:~#
Code: Select allroot@telmat:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
[Code] .....
View 1 Replies
View Related
Nov 18, 2010
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
View 6 Replies
View Related
Jul 20, 2011
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
View 1 Replies
View Related
Apr 5, 2010
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
View 1 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
Aug 3, 2011
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies
View Related
Mar 19, 2011
A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
View 1 Replies
View Related
Jul 31, 2011
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies
View Related
Mar 5, 2010
I use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
View 1 Replies
View Related
Jun 17, 2010
I am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):
[Code]....
The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.
View 1 Replies
View Related
Jul 6, 2010
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
View 14 Replies
View Related
Oct 3, 2010
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
View 1 Replies
View Related
Nov 14, 2010
I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?
View 4 Replies
View Related
Jan 24, 2011
To configure SMS gateway using Kannel configuration for Huwei GSM Modem
dmesg gives attached modem in my system:
View 2 Replies
View Related
Apr 30, 2011
I have a problem with the configuration of the NS zone. Looked through the logs, and there:
Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/db.domain.pl:1: no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone domain.pl/IN: loading from master file /etc/bind/db.domena.pl failed: no owner
[code]....
View 1 Replies
View Related
Jul 16, 2010
the screen flickering after installing opensuse 11.3? There are lines flickering on my screen horizontally. I have the Mobile Radeon HD 4200 graphics, ACER Aspire 4540 Laptop. I am currently using the default video driver rather than the proprietary driver.
View 3 Replies
View Related
May 8, 2010
only certain games are doing this, I haven't seen any other kind of flash have problems
Everything works for a while, then after a few minutes there start to be flickers of boxes, some of them colored, some black
they are only on the screen for about one minute, and only in the frame of the game
View 4 Replies
View Related
Nov 11, 2010
Recently i've installed 10.10 and have a problem with flickering screen on VGA. I have 64-bit release, ge force 210, nvidia propietary drivers and two monitors:
- AOC_1920*1080_60_DVI
- Philips_1280*1024_75_VGA
- nvidia-current, 260.19.12, 2.6.35-22-generic, x86_64: installed
No matter which monitor is attached to VGA, it flickers randomly every couple of minutes. Sometimes it flickers when i use mouse or keyboard, but sometimes it flickers by itself.
View 3 Replies
View Related
Feb 22, 2016
I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
View 0 Replies
View Related
May 13, 2010
I have a web server running and wish to get a mail server running on the same machine. I have a registered domain name. I have postfix and dovecot installed. I can send emails from the server to my normal address on a different domain but cannot receive mail. I can send and receive mail locally with no problems. I just don't know where to look for the problems. If you need any more info ( config files/doamin names etc let me know)
View 5 Replies
View Related
Feb 8, 2011
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
View 1 Replies
View Related
Jan 14, 2009
I've been trying to install Fedora 10 but the screen flickers about once every two seconds (not at set intervals though sometimes 5 seconds sometimes < 1 second).I've been searching around and all posts I've read about hh ave pointed to an nVidia driver bug which would make sense since I have an nVidia card but these were all posted back in summer of '08 so I'm not sure if it is still lingering.
View 2 Replies
View Related
Jul 7, 2011
I have a problem with the screen flickering on fedora 15 (and lots of other modern distros, eg: ubuntu 10.10 and 11.04 and opensuse 11.4) i think it is something to do with xorg.conf as older linux distros work fine
so i added one using
Code:
Xorg :1 -configure
cp /root/xorg.conf.new /etc/X11/xorg.conf
but i still have a slight flicker. my monitor takes an input at 50-60Hz how do i set that up in the config file or is that not what is causing that? and can somebody recommend me a nice icon set for fedora
I need to add this somewhere Code: ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 903 909 934 +hsync -vsync in the xorg.conf no idea where!
View 3 Replies
View Related