I'm using debian jessie and I use lightdm..and I created a script in "/etc/X11/Xsession.d/canberra", with this contents:
Code: Select allif [ -z "$GTK_PATH" ] ; then
    GTK_PATH="/usr/lib/gtk-2.0"
else
    GTK_PATH="$GTK_PATH:/usr/lib/gtk-2.0"
fi
[URL] ......
Login to my user account the variable "$GTK_MODULES" is empty....
I thought the standard was that rc.local was executed before GDM and Nautilus loads. For some odd reason, my Lenny desktop is loading Nautilus before it decides to execute rc.local. This is causing me some serious problems.
View 2 Replies View RelatedI am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies View RelatedA week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies View RelatedI use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
View 1 Replies View RelatedI am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):
[Code]....
The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?
View 4 Replies View RelatedTo configure SMS gateway using Kannel configuration for Huwei GSM Modem
dmesg gives attached modem in my system:
I have a problem with the configuration of the NS zone. Looked through the logs, and there:
Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/db.domain.pl:1: no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone domain.pl/IN: loading from master file /etc/bind/db.domena.pl failed: no owner
[code]....
I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
I have a web server running and wish to get a mail server running on the same machine. I have a registered domain name. I have postfix and dovecot installed. I can send emails from the server to my normal address on a different domain but cannot receive mail. I can send and receive mail locally with no problems. I just don't know where to look for the problems. If you need any more info ( config files/doamin names etc let me know)
View 5 Replies View RelatedI recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
I need to add -audit to the process /usr/bin/Xorg :0 -nr -verbose -auth /var/run/gdm/auth-for-gdm-MTmpH6/database -nolisten tcp vt1
And have added -audit to the line in /etc/X11/xdm/Xservers but with no luck. I can't seem to find where this thing is getting launched from!
i have install php and make proper confgiuration as said in various books and forums.but |all what i gotis just blankpage which means it knows that thereis the file at given folder but it cannotexecute.
View 1 Replies View RelatedI have a script scheduled to run with Crontab at 5am each weekday.The script is all good and executes manually (is just a simple stop/start of a service)I have reason to believe that it is not executing according to schedule.I am looking to see when a script was last executed.The script is executing accordingly (long story short, I forgot it was Tuesday). I would still like to know how to check a last-execution time.
View 1 Replies View RelatedHow can I find out which script runs and automatically mounts any usb drive inserted? This script seems to be faulty because it fails on ext3 disks but functions fine on NTFS or HFS+ disks. If I can find out which script it is maybe someone can help me fix it?
View 14 Replies View RelatedI usually set the transfer rate for wlan on start up because I dunno any other way of doing it. I find it weird that every other ubuntu versions can do rc.local at startup, even 9.10 xubuntu, but it didn't work for ubuntu.
how can I get the computer to run the script on startup? I tried to google for the problem but I only seen people mentioning the problem not the solution.
I have this script that I want to be run on startup:
Code:
#!/bin/bash
#chkconfig: 5 80 20
[code]....
why a script is not being executed during shutdown. I have a script in 'init.d' that works properly from command line. It also works fine at boot. My problem is that it does not execute at all on shutdown. I am using all the standard rc.d stuff for the script. Here are my LSB tags:
Code:
### BEGIN INIT INFO
# Provides: setwebpage
# Required-Start: $network httpd
[code]....
When I check the rc?.d directories, the appropriate links are there with the proper NN. This script has to FTP a couple of files to a remote server so the network is required and the script should be run very early in the shutdown process. However, the first thing the script does is send a message via 'logger' indicating it is executing with the 'start' or 'stop' parameter. The 'stop' message never shows up in the log thus I have to conclude that it simply is never executed.
I have a .wav file that ask "what's is your name in a robotic/computer voice. Is there I way I can execute that .wav file to execute as the script itself ask "What is your name?" giving the illusion that the computer is asking the question?
View 7 Replies View RelatedThe actual file didn't exist. I am confident it came through a site but I am more curious what settings in apache affect the ability to do this?
View 2 Replies View RelatedI want to get a of log all the commands executed by the root user with the following details :
incoming ip
username (thru which su was executed)
time and date
all the commands executed as mentioned above.
Also if user has managed to login as root, he should not be able to disable / delete the above info. Can this info be collected at some other physical server ?
I've firewall machine customers connect on it then connect to one of another 3 machines as root through ssh key , is there any way to know which user connect to which machine and what command that he has executed without using script command ?
View 1 Replies View Related