I am very new to Debian coming from CentOS.I am setting up a server for a customer.I can't SSH to it nor can I get to the port for the 3ware Disk Admin.I can PING the server and I can PING yahoo from the server.
View 6 Repliesi just installed debian on one of my cvomputers that is more than 20 away from the wirless router router in the house and i can't get it to connect to thew internet via wifi i did this i went into system>administration>network and i sawmy wirless card and enabled it (a progress prompt came up for about 5 minutes) then i clicked properties and entered all of the information about my wirless router (i thought it would've scanned the area for any wirless ap) then i clicked okay and no dice, i went into the web browser and i get an error. what did i do wrong? how do i make it connect to the internet via wirless i have 2 wireless cards connected to this computer (sometimes linux doesn't kije the internal one so i connect the usb wirless card that i got)
View 14 Replies View RelatedThe upgrade actually went pretty well, except for what looks like a new "feature" to mysql-server-5.1. But I post here, because the issue seemed to be in "/etc/hosts" file. If it should really be somewhere else, feel free to move it. The problem is that I don't understand what this means. What potential problems do I have without a "127.0.1.1"? Or could this have been effected by some change to the "users" table in mysql? This mythtv server "musem" is my main machine, and is being remotely accessed by the Linux box next to my TV.
View 1 Replies View RelatedI am running a NFS share on a Debian Lenny server with to network interface.
Sometimes when booting the server the following messages i shown in syslog:
Code:
If the system is rebooted then NFS is functional again. I would like to know way this happens somtimes so i can repair it, anyone with an idea? Another thing is that i would like to bind the NFS service to a specific interface e.g eth1 is this possible?
I'm attempting to set up a DNS server using Debian Lenny. I followed the instructions on this page:
[URL]
and it's not resolving domain names.
I have been fighting with this for days. I upgraded from etch to lenny. I tried installing mysql-5.1. I have uninstalled, reinstalled, updated, upgraded, many, *many*, times. It just stubbornly refuses to work.
Quote:
I installed for the sheer pleasure of it a webserver. includes apache2, postfix mail server, MySQL, MyDNS nameserver, PureFTPd, SpamAssassin, ClamAV, etc etc. (I have tried to use the config panels ispconfig and webmin)
The situation: There are 3 sites listed on the server, All 3 on different virtual hosts (obviously). The http access goes trough the 20080 port since my ISP blocks everything below 1024 (the bastards). I use a linksys router (192.168.1.1) with dmz pointing to 192.168.1.100 (server) The sites on the server:
inphone.be
fraksken.be
fraksken.is-a-geek.org (but appearently not geek enough)
I also gave them own IP's:
192.168.1.95
192.168.1.96
192.168.1.100
[Code]...
rying to install glassfish enterprise server on an debian lenny x64 virtual machine.I encounter some issues like the binary can only be execute by a 32bits JDK, need an xserver for install, all this has been take care of.From Sun GlassFish Enterprise Server 2.1 Installation GuideQuote:f you are installing Sun GlassFish Enterprise Server on a 64?bit machine (running a 64?bit operating system), use a 32?bit JDK to install Sun GlassFish Enterprise Server on your 64?bit machine. You will need to command:./distribution_filename ?javahome path to 32?bit JDK locationLatest 32bits JDK from SUN
Code:
glassadmin:/home/glassfish# java -version
java version "1.6.0_17"
[code]...
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
I'm new user and need connect with my "D-Link USB Modem DSL 200" in lenny (5.5)is any guide about it?
View 1 Replies View RelatedI'm setting up a VPN with openVPN on a debian lenny server. I successfully installed it in the server, then created the certificates and both client (winXP) and server config files. For the client I use openVPN gui. I tested the tunnel and everything went just fine. I even can ping the openVPN server from the XP client.But thats all. I can't ping any machine behind the openvpn server.Some facts that you may find useful to help me with this issue are:
- The openVPN server is not the default gateway of the LAN. The dg is a pfsense server
- I dont have iptables enabled (policy of all chains are ACCEPT).
- I have configured ip forwarding (echo "1" >/proc/sys/net/ipv4/ip_forward)
[code]....
I have checked and all seems to be OK. I think that the problem is connected with routing the traffic from the vpn to my LAN but I don't know how to do that (besides the push route line in the server.conf).
I have installed Debian lenny with software RAID0 (i think it makes no sence to my problem but maybe...) I have installed apache2+php+MySQL (everything worked) I have installed proftpd (to enable users to put files over FTP) after this i tried to connect over SSH to my server i have got:
Code:
$ ssh -l shark 192.168.0.254 -v
OpenSSH_5.1p1 Debian-5, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code].....
I thought it is problem with SSH i have tried to connect with another machine over putty, but no success... then i have removed ~/.ssh dir and tried to connect again... i got the same error. Then i connected keybord and monitor to my Linux box, tried to connect there... no success... neither root or my regular user shark. but i should mention my FTP users who have shell: /bin/ftp (symlink to /bin/false) log into the system and then automatically disconnect...
i have tried to boot my linux box to debian safe mode... it asked for a root pass. after i provided correct root pass it didn't fit. I remember once i have made my linux boot to init 1 without asking to provide a pass (it was mandriva Free 2005 or 2006.0) how to do it with a debian machine using grub or any other fixing possibilities?
P.S. i can not how provide server side /var/log/syslog or any other info because i cannot log into my Linux "server"
I have installed CUPS on my Debian 5 Lenny server. I do not have a GUI installed, only SSH to command line.
I cannot get CUPS to let me browse to the html interface from another machine. I believe that CUPS is running only on localhost because when I run
Code:
I get
Code:
When I browse (or telnet) to port 631 from another machine it refuses the connection, if I telnet from my Debian server to port 631 it connects.
My cups.conf is
Code:
I'm not sure how to make it allow me to browse from another machine that does have a GUI so I can configure a printer.
I have a small faliure in my config after i have installed a postfix mx server on my local lan to provide me sysmails from my local network.I have masked my domain and my relay mailserver, so it can't be used to wrong thingsI run Debian 5 Lenny all packets upgraded with aptitude.
View 3 Replies View Relatedi tried installing the drbd for replication of data.. i found some tutorials but when i tried installing it i spits out an error of
Code:
E: Package drbd8-module-source has no installation candidate this is what i use to install it
Code:
apt-get install drbd8-utils drbd8-module-source drbd8-source build-essential
I currently have a debian lenny high performance cluster running seamlessly using dhcp and tftpd-hpa. All nodes are completely diskless, and i would like to keep it that way. I now would like to have a client boot over local into a full KDE desktop.
Here's the cache.
1. I would like the client to also be a node. I would like it to handle processing as the other nodes do, but this one with a full desktop, with ALL data and privileges accessible.
2. The client will have its own workstation graphics. It will need to have that driver loaded without slowing the system.
3. Client will need to be able to use its own usb, bd-rom, dvd, audio, etc. even though it will be booting into the HPC.
4. Wireless. I cannot run 70 ft of lan across an apartment. not happening.
The idea is a media center applicable "powerhouse" with high-end power and graphics for easy media editing, 3d creation, and gaming. Will also be used for webcache over all local, file sharing, and other server applications.
HPC specs:
-headnode: hp compaq p4-ht 3.2 ghz, 4x500gb, 4gb mem, gigabit ethernet, wireless-N
-nodes: 4x p4-ht 2.2 ghz, 2gb mem, no-name brand slim desktops; 2x panasonic toughbooks p4-mobile 1.8 ghz, 1.5gb mem; 3x gateway p3 unknown specs; and 1 hp 530 notebook 1.6ghz core2 duo, 1.5gb mem
-client: hp compaq core2 duo 2.13 ghz, 4gb mem, wireless n, bd-rom, 2x dvd-rom, usb 3.0 card, bluetooth, 1gb AGP nvidia geforce 6800 dual-dvi, no hd.
I need to know how to set up this PXE.
I've been casting about the web searching for clear instructions for setting up a print server using command-line tools with a USB printer. The server is Debian Lenny, the printer is a brother hl-2170w. Can somebody tell me where to look?
View 1 Replies View RelatedI have one headless squeeze and two notebooks (one squeeze, one lenny).
When I have X (on headless squeeze) on lenny notebook, it is unacceptably slow. Something like it takes 3-10 seconds to redraw window (acroread, iceweasel, possibly xterm.)
It is not so slow when I use squeeze notebook. Yesterday, I upgraded lenny one to squeeze. Then, it is not slow any more!
My Apache web server (respectively a child process) is crashing several times a day. I wanted to find the exact reason and activated the core dumps but even though the crashing-issues continue, the core dumps were never created. I have found several howto's which basically point to the same steps:
- set "ulimit -c unlimited"
- add "CoreDumpDirectory" directive into apache2.conf (Debian's httpd.conf)
Another info I've found is that /proc/sys/fs/suid_dumpable shouldn't be 0 - so on one howto it said to echo 2 into it, on another one to echo 1 to /proc/sys/fs/suid_dumpable - didn't work with neither of them.
I have a problem defining persistent device naming on a Debian Lenny server.I have:RAID1 controller on the server machine with two SCSI disks.external storage with RAID5. I have / mount on the first partition on the server SCSI disk and /storage mount on the external storage. I'm experiencing a problem: The system recognizes the system disk (RAID 1), as sda or sdb randomly.I want: To control the recognition, and tell the system that sda (sda1) will always be the system disk.The motivation: GRUB is configured to work with sda, and when the system disk doesn't, boot process fails, and I end up in the initramfs shell-like interface.
Code:
Booting the kernel
.
.
.
mount:mounting /dev on /root/dev failed: No such file or directory
mount:mounting /sys on /root/sys failed: No such file or directory
[code]....
Been working with this problem for over a week now and has come to a dead end, I have installed pureFTPD with MySQL on Debian 5 Lenny 64bit. My problem is I can't login with the users in the sql-database, but for some strange reason, I'm allowed to loggin as anonymous. Unix users can't login either.
I have followed the guide on: [URL]..
- Created a ftpgroup and ftpuser.
- Created a database ftpd
- Created a user vhosts and given access to ftpd db
My configurations files
/etc/pure-ftpd/auth/30mysql
Code:
/etc/pure-ftpd/db/mysql.conf
/etc/pure-ftpd/db/mysql.conf
[Code]...
How to setup vncserver and keep it running in the background after restart on Lenny workstation? The admin should be able to connect every time via vncviewer to this workstation.
View 2 Replies View RelatedI've just recently upgraded to lenny using aptitude (following the instructions on debian.org. All went smoothly, and almost everything is working fine.I have had my X server crash twice since then, both times when I simply doubleclicked a running application. There is some indication of problems in the Xorg.log file, but it's not helpful to me -- can you help me understand?
View 2 Replies View RelatedI have been tearing my hair out with this. As part of a backend perl script i am holding the Epoch time as session data using apache session and mysql so i can delete sessions after an expiry period. When I retrieve the time it is about three months old even when i only just set it. The code example below best describes the problem:
View 5 Replies View RelatedI'm in need of a bit of assistance from you Debian users. I have two servers that I thought were identical installations, both running Debian Lenny. Tonight I started the upgrade to Squeeze on both servers and one of them went smooth. The other one started out good but fails on the postconfiguration of openssh-server. I'm getting the following message:
Code:
Setting up openssh-server (1:5.5p1-4) ...
Auto configuration failed
2524:error:0E079065:configuration file routines:DEF_LOAD_BIO:missing equal sign:conf_def.c:366:line 67
invoke-rc.d: initscript ssh, action "restart" failed.
[Code].....
It looks like there's an error in one of the files in openssh-server that prohibits it from installing correctly. However on the other server it all went well.
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main
deb-src http://ftp.rediris.es/debian/ squeeze main
deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main
deb http://ftp.rediris.es/debian/ squeeze-updates main
deb-src http://ftp.rediris.es/debian/ squeeze-updates main
I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
I have a very strange problem for me. In this example dns and IP is hiden for security reason. When I try from putty manager to connect to my Debian and write next command:
[Code]...
I recently installed Debian 8 on my other computer and wanted to install a driver for wireless. Sadly unsuccessful... So i started browsing for solutions but could not find the final answer. At the moment i need to install build-essential but it seems i can´t connect to the Debian server. And then i tried to apt-get update which was also unsuccessful.
Here is what happens:
root@kustidebian:~# apt-get update
Ign http://ftp.ee.debian.org testing InRelease
Ign http://ppa.launchpad.net trusty InRelease
Ign http://ftp.debian.org jessie-updates InRelease
[code]...
I have a problem with my server, just installed it, the problem is that im behind a router, and i can connect to the server on the internal IP, but not to the one pointing out to the net, i added the port it portforward, but still no go. I also tested to add the computer as dmz, still no go. SSH2 is it what i trying to get to work. my router is a dlink dir-635
The error i get is:
The remote system refused the connection.