CentOS 5 :: Cannot Find Openssl/opensslv.h Under /usr/include
May 18, 2010
I installed the aMSN 0.96 from yum install When I try to loggin, the aMSN required installation TLS module I selected Linux-x86_64, because I am using a IBM T400 notebook computer but the system replys: Installatiom TLS module error: Couldn't get [URL] So I went to the [URL] and downloaded the tls1.6-src.tar.gz But when I configure it. the system says: configure: error: bad ssl-dir: cannot find openssl/opensslv.h under /usr/include
Then I try to using yum to install openssl
The system replies:
[root@localhost tls1.6]# yum install openssl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[Code].....
View 3 Replies
ADVERTISEMENT
Jan 29, 2011
I've recently migrated an unlicensed RHEL5 box to CentOS 5 in order to get the system patched, and yum is telling me that openssl 0.9.8e is the up-to-date version. But that version is over two years old. I know I can install the newest openssl by using the rpm and I also know how to install from the tarball, but I'm trying to avoid both methods because I prefer the automated dependency handling of yum.
My question is SHOULD I be expecting yum to see openssl 0.9.8q when I run 'yum update openssl'?
If so, I'll be happy to reinvestigate my configuration for problems. I'm currently just using the default CentOS repositories.
If it's a case where anything beyond 0.9.8e simply hasn't been included from upstream, and I need to install it manually, that's fine. I'm just trying to get a handle on my expectations. I've been pouring through google and forums and looking for documentation for weeks, but there's so much that it's definitely possible I've overlooked it.
View 4 Replies
View Related
May 16, 2009
I just can't figure out how to enable openssl on my server. I've searched around on the web but have come upon dead ends. I recently became the admin to a server of a new company, the previous admin installed everything on this server. The server has php running which was installed thru yum I believe. And so was OpenSSL. Recently though I've been ordered to configure a online sales software. So I started investigating what I would need. I know I need OpenSSL, a certificate which should be bought, etc.
I met the dreaded dead ends when I came upon knowledge that I had to make OpenSSL work with PHP. Ok so I got to work. I found out that I needed an extension enabled in php. And the only way (that I've read so far) is thru compiling PHP with the command --with-openssl-dir=path. The problem is that I've compiled many times now and see no change in the phpinfo file. Can the extension be enabled (--with-openssl-dir=path) even after the php and openssl have been installed thru yum? I'm also new to linux
View 5 Replies
View Related
Sep 27, 2010
I recently just installed centos, but it appears that when I installed it v 0.9.8e was installed consequently, all the lib's etc. are /lib/libssl.so.0.9.8e instead of an ordinary /lib/libssl.so.0.9.8 etc. and this is causing some problems for me, as programs are looking for /lib/libssl.so.0.9.8, and even if i symlink/copy/move /lib/libssl.so.0.9.8e to /lib/libssl.so.0.9.8 there are still some errors occurring. I had been reading that supposedly yum is meant to have a "yum downgrade" option, however it doesn't appear to be recognised when I run it on my centos server.
View 2 Replies
View Related
Jun 26, 2011
I find my self abit stuck upgrading OpenSSL to the latest version. The situation is that i've been running LAMP servers just fine by installing the web services from the repositories AND the web services from source. However im now in the process of making a PCI-DSS compliant server LAMP server. I've just had the vulnerability scan report back and its failed due to the OpenSSL having vulnerabilities and it tells me I must upgraded to version higher 1.0.0d.
I've basically spent hours and hours trying to get this working along with research but I dont seem to be having much luck with this one
Im using a fresh install of CentOS and trying to create a RPM using the source code and rpmbuild, I read this was the best way I read, and this is my first time using rpmbuild.
Code:
yum -y install rpm-build make gcc gcc-c++ perl mlocate
cd /usr/src/
wget http://www.openssl.org/source/openssl-1.0.0d.tar.gz
updatedb
tar -zxf openssl-1.0.0d.tar.gz openssl.spec
[Code].....
View 11 Replies
View Related
Mar 11, 2011
Compiling Amarok from git gives error "gdk-pixbuf/gdk-pixbuf.h: No such file or directory" it is installed in /usr/include/gtk-2.0/gdk.I just up'ed to openSuse 11.4 and KDE 4.6.1 - compiled fine last time I tried which was probably last weekend or so (March 2nd or third)Wondering if /usr/include/gtk-2.0/ is new in 11.4 because of the upcoming gtk3.0 and the problem is it's not some path and not being compiling proficient I'm a bit lost.full error
Code:
/home/smiley/MyTemp/amarok/src/core-impl/collections/ipodcollection/handler/IpodHandler.cpp:35:35: fatal error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory
[code]....
View 1 Replies
View Related
Apr 13, 2010
Recently I have moved to F11. While I am trying to install directFB explicitly, I am getting error related to X 11 dependencies. It could find no includes files under the directory /usr/include/x11/. But x11 libraries are available in the system. I remember that, i had these x11 include files in my F9. Do I need to install any external packages to get the x11 include files in place?
View 4 Replies
View Related
May 14, 2009
Yum answers that it does not contain lighttpd or lua in the repositories (base,updates,addons,extra). Where can I find a repository containing these packages or should I revert to building myself ?
View 3 Replies
View Related
Nov 5, 2010
I'm trying to dynamically write command section stubs with a pre-script to be included via %include. The simplest of these contains the disk partitioning commands. Following the canonical examples,[URL].. for one, of this found in every source of documentation for RHEL/Fedora variants does not work. Anaconda attempts to prompt for interaction to get the partitioning scheme and a cmdline install stops with "In interactive mode parttype, can't continue". I've stripped things down to the following two cases:
%pre
cp /mnt/source/disks-ks.cfg /tmp/
%include /tmp/disks-ks.cfg
%post
[Code]...
View 9 Replies
View Related
Jul 11, 2010
What is the difference between /usr/local/include and /usr/include? When I compile my program, is both /usr/local/include and /usr/include avaliable? Can I copy a file from /usr/local/include to /usr/include?
View 1 Replies
View Related
Jul 8, 2010
I just downloaded the SDL source code. i did compile and make of this code.then i did make install. but i didnt see the files of SDL.h and lib.SDL.*** in /usr/include/ but later i found out that these files are placed in /usr/local/include and /usr/local/lib. how can i specifically install libraries on /usr/include and /usr/lib
View 2 Replies
View Related
Jun 26, 2011
Centos noob with fresh install of Centos 5 DVD on AMD w ATI Radeon 9250 /1 gb RAM/320gb HDD. Don't see an "installation" forum so posting here. Read here -> and following page which seems to indicate the default option on a new unformatted 320gb HD is suitable for most users, so selected it just to see. Install went fine. Using KDE as default desktop.cat /etc/fstab shows:
[root@centosdesktop user]# cat /etc/fstab
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
[code]....
View 6 Replies
View Related
Jun 16, 2010
I am trying to edit the iptables to include some ports/ip for openfire server. The problem is the computer is very locked down with permissions...I logged in as ROOT with ID 0.Now the iptables has ROOT for permission BUT ID 1 which reflects BIN.As root i cant edit or chmod/chown the iptables. Here is what i tried:
1. change password of BIN - successfully changed with no errors BUT still cant su BIN with the new password...
2. tried changing the ID of ROOT to 1 but I dont have permission to use the command....
so anything i can do here??? I dont have permission with Shadow either...
View 3 Replies
View Related
Nov 10, 2009
I just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.
I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?
View 2 Replies
View Related
Apr 2, 2009
I've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.
[root@onion /]# rpm -qa |grep mysql
mysql-5.0.22-2.1.0.1
[root@onion /]# find . -name mysql
./usr/bin/mysql
./usr/share/mysql
./usr/lib/mysql
However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.
[Code]...
View 3 Replies
View Related
Mar 30, 2011
Is it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:
[Code]...
View 2 Replies
View Related
Jan 19, 2010
I am trying to get the wireless enabled in my laptop. Following is the dmesg log I get:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[code]....
View 3 Replies
View Related
Nov 9, 2009
Where can I find a bunch of GDM theme RPM's for CentOS 5.4? All my efforts at Googling only results in Ubuntu (.deb) themes.
View 4 Replies
View Related
May 14, 2010
I'm unable to compile ruby 1.9.X and I found out it was related to openssl, although it seems there's a patch available for ruby I don't know how to apply it so I was thinking on downgrading to openssl 0.9.8n
I'm using F13 btw, I'm still posting it here as openssl 1.0.0 was first introduced on F12, the other major distros are still using openssl 0.9.8k so there's no much information on the problem
View 2 Replies
View Related
Jul 27, 2011
I have a weird problem in which I try to use cryptodev in Openssl version 0.9.8g, but then if an error occurs or the system logs out, the version for Openssl rolls back to 0.9.8b.I have also tried reinstalling, but no dice. The version stays 0.9.8b. I am using Intel Tolapai with RedHat 5
View 1 Replies
View Related
Jan 14, 2011
I was upgrading openssl 0.7 to 0.9.81 in my redhat 9 server. I've followed the guideline from here: [url]
Now everything is messed up There's no libcrypto.so in /usr/local/ssl/lib directory. Only libcrypto.a. Neither in /usr/lib or /lib directory. I can't even run scp or wget to download rpm of openssl. Getting libcrypto.so error. I've use locate command to find libcrypto.so. There's none. I've run ./config, make, make test and make install command again in the openssl 0.9.81 source directory. But no luck. No libcrypto.so. This is a production server and the httpd went down.
View 4 Replies
View Related
Apr 1, 2010
I want to recompile Apache in order to be SNI supportive because I need to use ssl named based virtual host:
I referred to the following links:
[URL]
I installed the latest version of openssl which is now openssl-1.0.0 I ran the following commands:
./config enable-tlsext --prefix=/usr/local2 --openssldir=/usr/local2/openssl
make
make test
make install
then to recompile apache with new SNI support I ran the following:
./configure --enable-so --enable-ssl --enable-rewrite --enable-unique-id --with-ssl=/usr/local2/openssl
make
make install
After that when I start Apache: /usr/local/apache2/bin/apachectl -k start I get the following error:
SSLStrictSNIVHostCheck failed; OpenSSL is not built with support for TLS extensions and SNI indication. Refer to the documentation, and build a compatible version of OpenSSL.
View 11 Replies
View Related
Jan 8, 2011
I am trying to get openssl to verify a certificate. I will walk you through what I have done so far.
1. openssl genrsa -des3 -out connect.mydomain.com.key 2048
2. openssl req -new -key connect.mydomain.com.key -out connect.mydomain.com.csr
3. Bought an SSL from GoDaddy.
4. Submitted my CSR
5. Downloaded sf_bundle.crt (CA File I presume)
6. Downloaded connect.mydomain.com.crt
Now I can do the following: [root@server tls]# openssl verify -CAfile sf_bundle.crt connect.mydomain.com.crt
connect.mydomain.com.crt: OK This is specifying the CAfile.
[Code]...
View 2 Replies
View Related
Aug 17, 2011
in order to share profiles between a Mahara and a Moodle installation I need to get OpenSSL working.
I've got OpenSSL installed on the server and followed this tutorial. However, I still get an error message saying that either OpenSSL or PHPs support for OpenSSL are missing: Could not generate a new SSL key. Are you sure that both openssl and the PHP module for openssl are installed on this machine?
What would be the next steps to actually set up the Apache server and PHP so they can use OpenSSL? (I've already specified the path to my caconfig.cnf file in Maharas config.php)
View 4 Replies
View Related
Aug 10, 2011
I am a new administrator and am running SLES 11 on a VM. I have openssl installed, but when I attempt to compile an add-on module to Nginx I get the following list of errors:
[Code]...
View 3 Replies
View Related
Oct 7, 2010
I've been googling around and have had a bit of a hard time trying to find help with this little issue. Managed to install CouchDB on the server at work after doing some fiddling due to not having spidermonkey availableAnyways, rt of this involved updating openssl.fter doing this however all hell broke loose.It seems a lot of programs needed the old version- I keep getting: error while loading shared libraries: libssl.so.0.9.8: cannot open shared object file: No such file or directory
I did a search:
>locate libssl.so.0.9.8
And it returned:
[code]...
View 9 Replies
View Related
Jul 14, 2010
I got an task assigned to me, i have to create new ssl key, csr & crt files using openssl. But the file name must be of this kind (*.aaa.xx.aa). When I tried the file name starting with * its not accepting the file name. But when I tried with the file name starting with . its getting generated.
View 1 Replies
View Related
Jan 18, 2011
I inherited a project that someone built in lampp, and I need create new SSL certs.
So I go to do so and it says that OpenSSL is not installed and to apt-get and install it.(Ubuntu by the way)
So before I did so, I wondered if it would cause any problems...since it was supposed to be part of the lampp stack.
View 3 Replies
View Related
Apr 27, 2010
I have problem in installing openvpn I get this error:
[Code]....
View 4 Replies
View Related
Aug 18, 2010
I want to use FIPS mode under linux. With openssl-0.9.8o, I typed "./config fipscanisterbuild" and then typed "make". The compile successful. Then I did a test about fips, below is my test code (main.cpp):
#include <iostream>
#include <openssl/ssl.h>
#include <openssl/fips.h>
int main(int argc, char *argv[])
{
[Code]....
View 2 Replies
View Related
