I'd like to share /usr/share/docs out to my local subnet via httpd so I can read server documentation from my workstation. I've simply done a generic install of httpd and httpd-manual and added this to the bottom of my httpd.conf file:
alias /docs /usr/share/doc
<Directory /usr/share/doc>
Order deny,allow
[code]....
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too:
[root@u15438957 ~]# yum update
Loaded plugins: fastestmirror, priorities
rpmdb: unable to join the environment
[Code]...
I have just configured CentOS server my new office. This is the first time I am using CentOS.
Whenever I am trying to change the webroot of the httpd server, it usually say "directory doesn't exist". whereas which can't be the case as it is home directory of the user.
To achieve this, what Do I need to do?
The second issue, I am facing that whenever I am adding new directories to public_html folder, it is not accessible. as the error page 404 is shown. I have changed the permissions to 0705 and ownership is also transferred to other user. What else is required to make new directories accessible by the web?
My server keeps freezing up requiring a hard reboot.
CentOS release 5.3 (Final)
httpd-2.2.3-22.el5.centos.2
Here is the error in /var/log/message
Sep 11 00:16:20 localhost kernel: httpd invoked oom-killer: gfp_mask=0x201d2, order=0, oomkilladj=0
Sep 11 00:19:14 localhost kernel: [<c0459e7d>] out_of_memory+0x72/0x1a5
Sep 11 00:19:14 localhost kernel: [<c045b352>] __alloc_pages+0x216/0x297
Sep 11 00:19:14 localhost kernel: [<c045c5bf>] __do_page_cache_readahead+0xc4/0x1c6
Sep 11 00:19:14 localhost kernel: [<c0436d9a>] ktime_get_ts+0x16/0x44
[Code]...
i am running cent 5.1 and would like to upgrade httpd v.2.2.3 to the latest 2.2.11 version provided by apache to resolve some ajp errors i am experiencing.
I searched but did not find any rpms for cent nor did i find any instructions on how to do this.
My server running CentOS 5.3. I use yum to install httpd, httpd-devel, php and it's module to run my site.
When I setup VirtualHost, i open httpd.conf and add some directive:
I just upgraded to CentOS 5.6 (been on 5.2 for ages....) and am getting the following error in the apache error_log file:[Sat Jul 02 13:50:25 2011] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)[Sat Jul 02 13:50:25 2011] [error] SSL Library Error: -8187 Security library: invalid argumentsThe notice entry, I can understand, however the SSL error is halting apache from starting. It has been suggested that this might be a package mismatch issue. I'll be more than happy sharing the package list for this box on request.
View 2 Replies View RelatedWe had servers that worked fine for years. After updated them to the latest version of CentOS (5.2 with latest updates), they keeps on hanging when being scanned by PCI Verdors (a Credit Card security standard). Basically, the scan causes httpd process to eat up all memory, and the server becomes unresponsive. Normal operations resume after the scan stops for 5, 10 minutes. Output from top looks like the following:
Mem: 1018988k total, 1007168k used, 11820k free, 432k buffers
Swap: 2096440k total, 2096440k used, 0k free, 4528k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
13601 apache 16 0 289m 102m 456 D 4.0 10.3 0:15.25 httpd
12836 apache 16 0 330m 101m 232 S 2.4 10.2 0:17.57 httpd
12834 apache 16 0 341m 100m 292 D 8.9 10.1 0:17.70 httpd
12837 apache 16 0 317m 99m 456 D 6.0 10.0 0:17.66 httpd
12839 apache 15 0 327m 97m 232 S 0.0 9.8 0:17.37 httpd
13590 apache 15 0 287m 96m 228 S 0.7 9.7 0:15.18 httpd
12833 apache 15 0 333m 96m 232 S 2.2 9.7 0:17.58 httpd
12835 apache 15 0 322m 95m 232 S 0.4 9.6 0:17.50 httpd
12840 apache 15 0 310m 88m 232 S 6.9 8.9 0:17.34 httpd
12838 apache 15 0 297m 85m 232 S 1.3 8.6 0:16.52 httpd
12831 root 18 0 20644 1360 248 S 1.3 0.1 0:00.27 httpd
I have a VPS server installed with centos 5.3. The server has directadmin. Probably that when directadmin was installed, the httpd server of choice was apache 2.2.13.
My problem is that i whant to install mod_dav_svn trough yum but without updating the latest version of apache form yum repository. If i exclude the httpd package when doing yum install mod_dav mod_dav_svn i get a dependency error witch say that i nedd httpd-mmn installed. So, my question is, how can i use yum to install mod_dav_svn without updating the httpd.
installed a new centOS 5 server, and after the installation, everything seem to work well but for httpd not running. when i try to issue the restart command i get the following error:
[root@appdev ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 206 of /etc/httpd/conf/httpd.conf: Cannot load
[code]....
For the first time in installed and configured centos-ds from this HowTos and from the manuals.It is running nicely but disabled my httpd.Is it not possible to run directory service and httpd in the same machine
View 3 Replies View RelatedI installed centos 5.5 and httpd service was working well for the last 2 weeks till yesterday. I restarted server and noted my hosting service were not working. I have tried service httpd restart on the terminal and it dispalys [FAILED]. I updated my machine and and have tried restarting it but it doesn't work. I am new to centos and I dont know how to solve this.
View 2 Replies View RelatedI've got a box with a fresh installation of CentOS 5.6, but had several configs copied from an old 4.8 box that I've now got to finish. Most everything seems fine, but I can't get apache running. It reports that it starts up fine, but immediately stops and reports "httpd dead but subsys locked"Most of the advice I've found while searching suggests to just delete the http.pid file and restart, which doesn't help in my case. I did find a few problems where SELinux was restricting httpd from creating or touching certain files (I found reports in /var/log/messages) but I've worked through that.
So the big question here is: /var/log/messages and /var/log/httpd/error_log are now empty, and don't show any more errors when I restart httpd. Does anyone know where else I can look for reporting/logging on what's happening to httpd to cause it to die?
I been tryin to install httpd-devel on Centos 5 with plesk i keep gettin Missing Dependency errors i went to url
and got attached packages but they give me this error
Code:
# rpm -ivh httpd-devel-2.2.3-45.el5.centos.1.x86_64.rpm Failed dependencies:
httpd = 2.2.3-45.el5.centos.1 is needed by httpd-devel-2.2.3-45.el5.centos.1.x86_64
Code:
yum install httpd-devel
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
code....
I've added httpd to runlevels 2-5 using chkconfig, and also double checked it using ntsysv, but it still won't run on startup, even though it works just fine when started manually (using "sudo service httpd start").The results of "chkconfig --list httpd" show it is on for levels 2-5, and I've confirmed the current runlevel to be 3. I've found no errors in the logs (neither Apache's nor the system's), but maybe I'm looking at them wrong...My machine is a VPS (on VMWare) running CentOS 5.5 32bit. For additional information, see the output of getinfo.sh: http://pastebin.centos.org/35570I would greatly appreciate help on this, as it is delaying our NGO from moving servers.
View 3 Replies View RelatedI am running centos 5.4, kernel 2.6.18. Also running httpd (apache2) as a reverse proxy with the following modules
mod_ssl
mod_cache
mod_proxy_*
Recently after updating these modules:
mod_ssl x86_64 1:2.2.3-31.el5.centos.2
httpd x86_64 2.2.3-31.el5.centos.2
distcache x86_64 1.4.5-14.1
I am getting wierd errors in the error logs:
[Wed Feb 10 15:44:18 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data
[Wed Feb 10 15:44:45 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data
[Wed Feb 10 15:44:48 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data .....
accidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :
[root@mydomain etc]# service httpd stop
Stopping httpd: [FAILED]
[root@mydomain etc]# service httpd restart
[code]....
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
Basicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.
View 2 Replies View RelatedI have just been told that httpd was not running on my Centos virtual server. It seems that my hosting company rebooted my server 2 days ago and that httpd restart failed due to:
Starting httpd: httpd:
Syntax error on line 213 of /etc/httpd/conf/httpd.conf:
Syntax error on line 2 of /etc/httpd/conf.d/proxy_ajp.conf:
Cannot load /etc/httpd/modules/mod_proxy_ajp.so into server: /etc/httpd/modules/mod_proxy_ajp.so: undefined symbol: proxy_module
I had worked around and forgotten about this some time ago. The problem arose because the most recent httpd update installed proxy_ajp.conf into /etc/httpd/conf.d which was then loaded on restart The trouble is I do not use mod_proxy (I think just to try and get a lean and mean web server) and proxy_ajp.conf does not check if mod_proxy is loaded before it tries to LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
Hence httpd fails to restart. RedHats's bug tracker lists this as an old issue (which was never resolved) [URL] My workaround was to rename proxy_ajp.conf to proxy_ajp.conf.orig so that httpd would start up correctly. However any updates simply reinstall proxy_ajp.conf and so IMO the problem needs to be resolved at source. how to ensure that httpd updates do not bite me in the future? Do I really have to run mod_proxy whether or not I need it?
We are using this url on our testing box and this ip is reverse proxy IP ( 10.192.64.52)
Without reverse proxy:- URL is working fine.
http://10.192.16.77/akc-qa/arsys/ser...TS000000001430
But with reverse proxy its putting escape [%25] in between %3a
[url]
Is it possible to write a rewrite rule to bypass escape [NE] for this particular URL?
When ever I have an issue with our LDAP server (which I was able to fix) we see the following errors in /var/log/messages and it causes problems with our services running on that box, e.g. httpd, nrpe, xinetd, etc. Aug 8 17:44:42 hostname httpd: nss_ldap: failed to bind to LDAP server ldap://serveraddress/: Can't contact LDAP server Aug 8 17:44:42 hostname httpd: nss_ldap: reconnecting to LDAP server (sleeping 64 seconds)... I am only wanting to authenticate SSH and Sudo and not services like httpd, nrpe, xinetd etc.
View 2 Replies View RelatedCan anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies View RelatedThe scenario like this. I'm working on Ubuntu 10.10. I've enable samba sharing with full guest access enable. In my office I had another server (CentOS 5.5) installed just for me and I've created a Apache VirtualHost which root document pointed to share folder on my comp
This is my fstab setting
//my ubuntu computer name/sharing/www /media/www cifs context=system_ubject_r:httpd_sys_content_t:s0,username=username,password=******,iocharset=utf8,fi le_mode=0777,dir_mode=0777 0 0
After label the mount folder as httpd_sys_content_t the Apache web server working in correct way (duno much but at least it can index files and excute some php code so) then the troll come in : if some file was created by my ubuntu (personal comp) then the file would be listed in Apache virtualhost correctly.
But if I'm ssh to CentOS server goto /media/www which was mounted to my unbuntu computer. Then type command like $mkdir something Suprising that folder ./something could not be accessed by Apache anymore except I remount by umount and mount it again or "setenforce 0" What is wrong with my system can anyone point me out of this headache
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
Is Setting up NFS the best method for mounting share drives between Mac and Linux?
View 6 Replies View RelatedI use Samba, NFS, RSync and FTP/TFTP in my multi-location setup.
Is there a CentOS standard place to put my sharable file space? I've seen /usr/local/, /var, /var/samba, /user and /share. I have gotten to the point of preferring /share, but I want my servers to adhere to standards in case I am not available. Another alternative is to create a user name that matches the group name and using that user's home directory for the shared file space. This would solve the issue of shared departmental mailboxes and backups, not to mention (though apparently, I'm going to) SELinux configuration... Maybe I've just answered my own question...
What are other people's opinions?
I'm trying to set up a test system for Windows 7. I've been having trouble getting it to map drives on the domain where I work, so I wanted to set up a test system with a similar setup so I can play around with settings without mucking up our network. Only problem is I can't get it configured to even work with XP, which does work on our domain.
When I type \server in the Run box I get the explorer window showing all of the test shares I've set up. But when I try to access them, it says the network path could not be found. Here is my smb.conf file:
[global]
workgroup = MAJOR
netbios name = VPN
realm = MAJOR.COM
[Code]....
I'm having some trouble mounting an NFS share on a VM host (both CentOS 5.5):
-------------------------
SAN/NAS BOX (NFS Server):
-------------------------
/ filesystem on VolGroup00/LogVol00 = 7.6GB A 20GB filesystem on vg_vm/lv_vm1 is mounted at /srv/vm1 A 100GB filesystem on vg_vm/lv_data1 is mounted at /srv/data1
Output of 'df -h' (extraneous stuff removed):
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
7.6G 1.8G 5.5G 25% /
/dev/mapper/vg_vm-lv_vm1
20G 173M 19G 1% /srv/vm1
/dev/mapper/vg_vm-lv_data1
99G 188M 94G 1% /srv/data1
documentation on the "stable" war-horse OSs. I am impressed for example on the community support of Ubuntu, Slackware, and impressed by the formal documentation of Arch and Gentoo.
1. However, how does the documentation of CentOS/RHEL compare to some of the other distros? and
2. How about compared to similar OSs, like Debian
