CentOS 5 Hardware :: Video Misaligned In Fresh 5.6 Installation; OptiPlex GX260 SFF?
May 17, 2011
I have tried installing both full and live CD version of CentOS 5.6 in my Dell OptiPlex GX 260 Small Form Factor and in both cases the video is misaligned. The video display top starts at the lower half of the screen and wraps around the top to meet it. Everything else works, the mouse and interface is OK. The driver selected for the installation is the i810.Choosing the "Intel- Experimental modesetting driver ... "
View 1 Replies
ADVERTISEMENT
May 5, 2010
I'm a Dell Optiplex 380 MT Workstation user which have a Intel HDA Integrated sound controller. I was using Ubuntu 9.10 32 Bits Karmic, and all works fine, but, two days ago I did a fresh install to Ubuntu 10.4 LTS 32 Bits Lucid. In Ubuntu 9.10 I didn't do nothing to make work all features of my workstation, but, in 10.4 LTS the sound don't work. The hardware appear in "Speaker Icon" and in the alsamixer menu, but nothing works. It's happens in the Live CD, Installation in Hard Disc, 32 Bits Version and 64 Bits version.
Here is the output of the command, in Ubuntu 9.10 & Ubuntu 10.4. The only difference that I see is the follow in lspci (bold text):
lspci
Ubuntu 9.10: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Ubuntu 10.4: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
At both version this is the which use (same output):
cat /proc/asound/card0/codec#0
Codec: Realtek ALC269
I've installed linux-backports-modules-alsa-2.6.32-21-generic-pae, reboot system and nothing happens.
lsmod | grep snd
Ubuntu 9.10 .....
View 9 Replies
View Related
Apr 2, 2010
I have a brand new OptiPlex 780 from Dell, I downloaded CentoOS x86_64 from [URL]. The installer runs the graphics mode OK, when I reboot into normal, the graphics doesn't work.
The last messages I see are:
Red Hat nash version 5.1.19.6 starting
starting clock,
starting UDev
then the display goes away, the montior says "Not Support" The monitor is 1 day old and supports VGA to 1680x1050.
I try pressing "I" (and/or "i") when Red Hat first starts, but the interactive menu doesn't show.
I have two idenical machines, the other is running XP (the CentOS was also before I loaded CentOS), WinXP is allowing screen resolutions of
- 800 x 600 @ 60Hz, 72Hz, or 75Hz
- 1024 x 768 @ 60Hz, 70Hz, or 75Hz
- 1280 x 1024 @ 60Hz or 75Hz
- 1680 x 1050 @ 60Hz
...all working on the same monitor.
During Bios boot, the monitor shows 600x800 @ 60Hz, during the text-only start of CentOS, it shows 720x400 70Hz. After CentOS boot shows starting udev, the montior breifly shows 720x400 70Hz, then "Not Support".
So....
Why isn't CentOS using the same graphics mode it used during installation (that worked fine)
View 1 Replies
View Related
May 6, 2010
I'm trying to run CentOS 5.4 (downloaded yesterday - CentOS-5.4-i386-bin-DVD.iso). Install process run well Pick default options on install. On partitioning part I've pick "Remove all partitions on selected drives and create default layout"
It get stusk after grub loading at : root (hd0,0) Filesystem type is ext2fs, partition type 0x83 Kernel /vmlinuz-2.6.18-164.el5 ro root=/dev/VolGroup00/logVol00 rhgb quiet [linux-bzImage, setup=0x1e00, size=0x1b3634] stops there, and not load the operating system
System : Dell Optiplex 320
PROC : Interl pentium D 3.00 Ghz
Mem : 2 GO DDR2 Windows XP SP3 was installed previously on this machine.
View 1 Replies
View Related
Sep 8, 2010
I've just installed 12 new Dell Optiplex 960 computers with Dell 2009W monitors. They are identical hardware and OS installs. Some of them are exhibiting a weird problem with their screens: They boot up and run just fine, but then the monitor goes black for 2 or 3 seconds, and comes back, with the small DVI icon popping up in the upper left corner to show which video connection is active. This repeats at random intervals continously; sometimes just a few seconds between, and sometimes many minutes.
The problem initially happened on just one machine so I had Dell swap the motherboard thinking it was a hardware issue. That did not fix it. Soon after that, I got reports from several users of the same problem on other of the new machines.
I've done a very basic install of CentOS 5.5, skipping all of my local configuration management stuff, and it still happens. Then I installed Ubuntu 10.04 and over the last few hours the machine has been rock solid. No video issues at all.
Here is the output of lspci:
View 10 Replies
View Related
Mar 2, 2010
After installing a Dell Optilex 280 desktop with Centos 5.4, I configured sendamil, squid and all the extras I needed for a proxy and email server. All was fine until I switched the machine off. I had changed the resolution before and all was working fine. Now I have lost my gui , the system starts O.K but goes blank after "starting udev". I can use webmin to administer the server from a nother desktop/laptop but the monitor is totally blank. I tried most configurations on the /etc/X11/xorg.conf file even tried to create a new one using X -configure but still nothing changed. I cant afford to reinstall because of the time it takes to update the box, our broadband connections are so expensive this end of the world (Zimbabwe) and not so efficient. I have looked at the logs and tried to google but the solutions wont work for me? I suspect there could be an issue with the intel graphics adapter?
View 3 Replies
View Related
Sep 17, 2010
I have read all of the articles I could find on the problems. I am using the lilo bootloader as grub doesn't work. I have also added pci=nomsi to my lilo.conf and ran lilo -v. I can get the system to boot with kernel-2.6.18-8.el5. However I can't get the system to boot with kernel-2.6.18-194.11.3.el5.i686.rpm. When I boot with kernel-2.6.18-194.11.3.el5.i686 the system hangs after it prints bios data check successful. I tried adding suppress-boot-time-BIOS-data to my lilo.conf (I ran lilo -v after the change) and the system still hangs. The Optiplex 320 is running bios 1.1.12
Why won't newer kernels work? Is there a way to get more information to print before the hang to aid in debugging?
View 16 Replies
View Related
Sep 10, 2011
I no expert and this was a bit of mucking around. Installed Version 5 dot something on a desktop (DELL OptiPLex) with a couple of extra HDDs, for a server to play with (samba to Windows). I used the drives as a single logical drive via LVM.
We had a power cut, now it doesn't work. In fact it's been hanging around for a couple of years and before I dump it I wonder if there is any chance of getting some of the wife's letters, pictures, etc that I promised I try and get off.
The /boot partition seems to be there and I've attached a photo of what happens at boot, and I admit....I haven't a clue what it all means. Also I did not think ahead and did not create a recovery disk. I know, I know heap damnation on me for being so reckless, but any chance I can get myself back in the wife's good books?
View 7 Replies
View Related
Oct 14, 2010
I've been a long time Debian user but now I'm working with Red Hat and I'm a bit lost. I just installed a fresh install of CentOS 5.5 on a new Dell server. Dell provides a current Red Hat 5.5 driver for mpt2sas. How do I install this driver?
The Dell instructions are not that helpful. They explain an RPM Install and a DKMS Install - what's the difference between the two?
View 2 Replies
View Related
Sep 19, 2011
i wanted to make a fresh installation of samba so i uninstalled and then reinstalled samba and the configuration files remained with the old configuration so i deleted the /etc/samba/ folder and now after reinstalling samba i don't have the configuration files i thought the installation process will create them ,but it did not do that
View 2 Replies
View Related
Mar 1, 2010
I'm trying to install Debian 5 on OptiPlex GX1, how do I do it?
View 2 Replies
View Related
Jan 12, 2011
Under GNU/Linux. I am talking about this. How do I know if a partition is misaligned?
View 14 Replies
View Related
Jun 17, 2011
During boot I get a message along the lines of "nouveau 0000:00:0d.0 misaligned reg 0x0060081D". I then get dumped into emergency mode. This has happened before on this box, then went away with one of the F-15 upgrades, and has now returned.
What's frustrating is that I tested F15 at both the Alpha and Beta stages and didn't have this issue with the install, only after updating.. And the KDE Live spin loads w/o major issue suggesting that it is a software issue. I've tried two earlier kernels to no avail and don't know what to try next.
View 1 Replies
View Related
Jul 12, 2011
I try install debian 6 on my dell gx 270, but on some step of instalation I have error. I try other computer, also dell gx 270 but same problem. I try change cd rom, hard disc, ram .... but problem is still here. Is some chipset or something from dell is problem? I try install firmware-6.0.1a-i386-netinst.iso and debian-6.0.1a-i386-kde-CD-1.iso
View 3 Replies
View Related
Feb 7, 2009
I have a Fedora 6 in DELL Optiplex 755. When I installed Fedora 8, I got the following error message:
"An unhandled exception has occurred. This is most likely a bug. Please
save a copy of the detailed exception and file a bug report against
anaconda at http://bugzilla.redhat.com"
This error message is from action of screen: "Installation requires
partitioning of your hard drive. By default, a partitioning layout is
chosen which is reasonable for most users. You can either choose to use
this or create your own."
I chose: "Remove Linux partitions on selected drives and create default
layout" or
I chose other options, but I still got same error message.
Then I switched to a new HHD, but I still got the same error message.
View 2 Replies
View Related
Mar 11, 2011
I need to upgrade to ubuntu 10.04 and I dont know if this computer will work on it.
View 1 Replies
View Related
Feb 15, 2010
New install of Fedora 12 64-bit from DVD on an Optiplex 740 (AMD) with 8GB memory I had to use the mem= option to get the install past the EDD probe, but it seemed to install successfully. Now on boot it goes all the way through the "filling icon" progress meter, then switches to a completely black screen with an X pointer cursor that responds to mouse movement, but nothing else happens. Ctrl-Alt-F{2-5} do not switch to a console login, so the system's inaccessible.
View 10 Replies
View Related
Aug 16, 2010
My next door neighbor has a dell Optiplex gx270 and wanted Ubuntu installing.
Hardware:
1gb RAM
P4 2.4
Intel 82865g Onboard Graphics.
40gb HDD
I tried the live cd and it froze on bootup, so I thought it might not be enough ram as the case sticker said 512mb ram. So I booted the minimum install cd and installed ubuntu desktop on it and then rebooted, when it boots i get grub and then screen will either do 1 of 2 things.
1. I get another flashing cursor in top left corner and then cursor stops flashing and then nothing happens at all.
2. Then screen will go black and nothing will show at all.
I have tried updating the BIOS, adding i915.modeset=0 to grub, didn't work either. Also couldn't find the xorg.conf under /etc/X11 to change driver to vesa. After several reboots atleast 30 since the check disk think showed and then it froze again. it booted correctly so I tried the latest intel driver from xorg edgers ppa. Rebooted and still the same thing happens. tried 2 different installs now and get same results. I have had to put winxp on it so he can atleast use it, but this will run out in 30 days unless he decides to buy it.
View 6 Replies
View Related
Jun 4, 2011
I'm currently stuck at the "lubuntu - Install lubuntu" screen on a Dell Optiplex GX150 (specs; Pentium III 1 GHz, 512 mb RAM, 20 GB HDD). I can hear the CD spinning up but nothing happens. Looking at the specs, the PC should be able to run lubuntu, right? Could somebody point me in the right direction? I've verified both the ISO and the CD checksum, both check out, so there should be no issue with the install media
View 1 Replies
View Related
Jul 9, 2009
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
View 1 Replies
View Related
Nov 18, 2009
When attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.
View 13 Replies
View Related
Jun 8, 2009
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies
View Related
Mar 23, 2010
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies
View Related
Apr 8, 2011
I am trying to install Ubuntu on my Dell Optiplex GX60 and am getting a black screen with white letters of errors and other stuff.
For instance.bad_area_nosemaphore+0x90/0x130
do_page_fault+0x378/0x440
error_code+0x73/0x78
etc.
View 1 Replies
View Related
Jan 28, 2010
i get this message both when booting from the live usb and once installed (i am asked to chose low graphics mode, or to reconfigure X):
Ubuntu is running in Low graphics mode. error: update configuration to solve
(EE) intel(0): output LVDS enabled but has no modes
(EE) intel(0): no valid modes
(EE) screen(s) found, but none have usable configuration.
View 1 Replies
View Related
Aug 9, 2011
I'm having some troubles playing hd videos (720p) on my laptop with ubuntu 10.04 installed. I have a dell inspiron 1720 with 4gb ram, dualcore 2,5ghz and a gforce 8600m card so it shouldnt have problem with playback.I have installed restricted extra package and activated the nvidia driver from the additional driver menu. I have tried using both firefox and chrome for hd ..... content and both media player and vlc for 720p files on my harddrive. All of the above perform horribly (~1 fps). Low definition videos plays smoothly though.
View 8 Replies
View Related
Jan 5, 2011
i just finish doing a fresh install of F14 and i have problem with video playback. I have added rpmfusion free and non free as describe in [URL] also Nautilus do not show thumbnail from video files.
[bamf@bamf ~]$ su -c 'yum localinstall --nogpgcheck http://download1.rpmfusion.org/free/...ble.noarch.rpm http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
Password:
Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit
Adding en_US to language list
[code]....
note: i have vlc, smplayer and ffmpegthumbnailer installed on the system but still no video thumbnails in Nautilus.
View 8 Replies
View Related
Sep 16, 2010
I've just finished installing Centos 5 on a dell server. Reboot after install - it goes through the motions and gets to the point of loading the GUI. At that point screen goes out of range. I've tried 3 different monitors...
View 1 Replies
View Related
Apr 17, 2009
I decided to do a fresh install of 5.3. I dedcided to use the entire HD for the install and not partition in any special way. I told it to format the HD and use the entire HD for linux OS. Just went thru the install with no additional software added, only what was the default install. After prompting for a user name and password i rebooted as requested. The issue is that i recieve no GUI to login to the desktop. Im able to SSH to the box and i tried doing yum update and it did not fix anything.i want to learn the command line but i need the gui for backup.
View 10 Replies
View Related
May 8, 2010
I cannot boot from the OS dvd. It says looking for boot info on CDDVD then boots right into an older version of windows that happens to be on the hdd. If I unplug the hard drive I can get into the CentOS installer but this is useless because the hdd isn't viewable as a place to install the new OS. I don't know if I need to format the drive before hand so that Cent has a clean slate or if there is a problem with the DVD itself. The later I dont believe so based on the working of the installer while hdd unplugged. The DVD drive is on its own ribbon and both hdd and dvd drive or set to primary master in DOS.
Aside: I have recenlty moved to centOS formally using ubuntu and messing around with fedora on another computer. I am using cent based on work with school, they recommended cent for project with professor.
View 6 Replies
View Related
