I want to implement quota per group users like this: Assume i have a Student group in my system, that student1 and student2 and student3 are three users in this group. i want to set quota 100GB per each user in this group, 100GB for student1, 100GB for student2 and .... The problem is when i set quota per group i cant say each user in that group have 100GB quota limit, also when i set quota per user, i should set one by one for each user.I want to know, is there anyway for set quota for all users in specific group?
In our organization there are around 1000+ users are using mails. The mailing system is implemented under RHEL using postfix and dovecot. For user based quotas i have implemented Disk Quota. But the problem when i want to edit quota for multiple users with similar limits i'm doing "edquota user" for every users. It seems very difficult. Now I wanna know:
1. Is there any way to edit quota value for multiple users at a single shot?
2. Also there is any method to send alerts mail to the end users on disk utilization?
How can I set quota on group plz send me detail with command.I am still facing problem to set the quota. I've tried many option plz send all steps to set quota from start to end.
i want secondary users can able to change the files permissions of primary group?user MAC is having www as a primary and httpd as secondary group. But he want to change the file permissions (chmod) httpd group files. Is it possible or not? I think its not possible. If it`s possible then let me know how?
I want to add some users to multiple groups. syntax of the file to pass to ldapadd? or would I use lapmodify? Does one add/modify a user record to specify the groups that user is a member of? Or does one add/modify each group record to specify which users are members?
i added users to the group om PDC after it i shared folder on linux server and given permission for users from this group, the folder is showed correct. After it i removed users from group, but the folder is accessible. Where is mistake?
[global] workgroup = STSCOMPANY password server = *
i just want to prevent from now on from all users maybe even root from adding other users to groups like wheel for example. I also want to know how can I prevent from all users to create new groups or add users to new one.real
Is there a way that I can set a quota for all new users that get created? I want to limit the hard drive space they get. I don't want to have to keep setting each new users quota either.
I have a number of users, categorised into various groups. I would like one of those groups ("developers") to be in the wheel group as well. I don't want to just copy the people from the developers group into wheel, because then when that group changes I'll have to change it in two places. Is there a way to specify that anyone in developers is in wheel, and have that be dynamic?
I need to set up quotas so each user has a limit of 20GB (soft could be 15GB) on their homes.Is there a way to set up a default quota for all the users, or do i have to do this for the 345982374058 users in my system manually?would group quotas help? (i dont understand much of these type of quota)
i installed Samba on my Fedora, have created couple of Share directories and assigned users accordingly, that part is apsolutly fine and working without any problem, but now the next step is i want to assign the quota limits to users to save the disk space,
I have my home server setup, running 10.04 x64. The OS is installed on a 300GB WD Blue drive, and I have a RAID5 array md0, consisting of 4x 2TB WD Green drives, mounted as /home. I am sharing the home directories using samba and using them to back-up the other computers in the house. I have created a user account+password for each computer, giving it its own "/home/computername_backup/" directory to store it's backups in.
Computers being backed-up:(750GB) Gaming PC running Win7 Ultimate x64 (30GB + 2TB) HTPC running Win7 Home Premium x64 (32GB) Netbook running Win7 Home Premium x32 (250GB) 2 Macbook Pros Running OS X 10.6.4 (tweaked to allow time machine to recognize the samba share as a time machine volume
Question: 5.37TB of /home seems good for now, and I haven't run into any problems so far, but I don't want to have to keep checking. I'd like to put a size cap on each user's home, to prevent one of the computers from gobbling up all the space. Is there an easy (or hard) way to configure this type of thing? My Macbook, for example, only has a 250GB HD. I could give it 3-400GB of space for its home and that would be plenty - whenever it filled its /home/, it would start erasing the oldest backups. If there is no size limit, I believe it will just continue to grow until all the free space is gone.
Considerations: Right now, the HTPC is storing all its media locally (on the installed 2TB drive). However, I've already used 3/4 of the space and the HPTC enclosure can only hold one drive. My plan moving forward is to have /home be used to store media files (iTunes music for all computers and tv/movies for the HTPC), which is another reason I'd like to ensure that the backups don't take up all the space.
I realize I could create a partition for each computer, but I'd prefer not to go down this route. This would seem an untenable tactic if I added another computer next month, or if I realized that the partition was too small.
how to map all domain users form group Domain Users to local group users (and maybe some more)? Im using Ubuntu 10.04 x32. Its connected to my domain using Samba and Winbind, I can login using my domain credentials, automatically map user folder form DFS server, but I think that domain users have too much priviledges in the system and want to restrict them as much as possible
When I have different people log into our ftp and browse to the same folder, some people see the files inside, some don't. all the user accounts are in the same group, which has permission to this folder. but the one user who can see the files is the owner. how can i fix it so everyone in that group who's the owner of the folder can see the files?
In other Linux distros I've used, new users are assigned to their own group (i.e. user 'joe', group 'joe') by default. To my surprise, when I create new users with my openSUSE 11.4, they are all assigned to the 'users' shared group by default.To test this, I created a new user called 'friends'. From my terminal, I can see how the new user files look like:
joe@linux:~> ls -l /home/friends/ total 40 drwxr-xr-x 2 friends users 4096 Sep 3 11:37 bin
I'm writing a user ranking module for a site. This ranking depends on some criterias and it's possible to set or unset any one of these criterias in order to consider them in calculating the user rank or not. And here's the way I've implemented the ranking calculation :
when I set one or more of the criterias to be considered in ranking , for each user in the system I insert one record for each criteria , for example : if I have 2 criterias and both are set and consider that I have two users , I'll have :
It means I just set the to_be_added field to 1 for all of them and leave the calculation of score for each criteria for each user to the time the user logins so that to prevent doing all these calculations at once , because there are a huge number of users ... But there is one problem , if I want to show for example the best user (based on the highest score) , the result can't always be true because some users might not logged in at that time and their score might be zero .
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic AuthBasicProvider ldap anon Order allow,deny Allow from all
This part by itself works for the LDAP authentication:
Anonymous guest Anonymous_VerifyEmail Off Anonymous_MustGiveEmail Off Anonymous_LogEmail on Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
What is the group 'users' (gid 100) for? It's tempting to use it as a general group for accounts that log in but would that cause a security risk? I've done a search for files owned by this group and there don't appear to be any. Googling the words gives very non-specific results!
I need to assign permissions for ftp users. For that I need to create groups with different permissions like upload, download, rename, delete, rename and delete. And the users added to the group need to have that group permissions by default.
I've been asked by my professor to add the list of users to a linux server (not sure of the OS type I think he said debian) but anyway. He gave me this script to add users.
Code: #!/bin/bash # Script to add a user to Linux system if [ $(id -u) -eq 0 ]; then read -p "Enter username : " username read -s -p "Enter password : " password egrep "^$username" /etc/passwd >/dev/null if [ $? -eq 0 ]; then echo "$username exists!" exit 1 else pass=$(perl -e 'print crypt($ARGV[0], "password")' $password) useradd -m -p $pass $username [ $? -eq 0 ] && echo "User has been added to system!" || echo "Failed to add a user!" fi else echo "Only root may add a user to the system" exit 2 fi
I need to see if I can get this script to read a file that list the usernames and their passwords using the pipe command (or some similar command) so I can just do it in one batch. I've done some searching but there are so many vairiations of the code that I've confused myself. Also, I'm not too familiar with linux, it's been a few years since I've used it but in the prior script, I need to add the users to an existing group named "forensics". Which line would I change/add in order to do this?
I'm using Slackware with NFS share and I've been wondering why I had problems with access to some folders and I finally figured out that NFS limits group membership only to 16. Is there a simple way to circumvent this in Slackware?
I'm using squeeze. hal allows any user (at least, ones logged into the console) the ability to automount any removable drive that is plugged in. I want to restrict the ability to automount to users who are in the group that owns the device node for the drive (some distributions use the "plugdev" group for this.) I know I can turn off automount individually in each desktop, but seeing as hal is the thing that runs as root and is actually doing the mounting, it seems to make the most sense to change the setting in hal.
I want to apply the same settings of Gnome among a group of users. I configured a "master"-user and exported his Gnome settings using
Code: gconftool-2 --dump > gnome_settings.xml For the other users, where the settings from the "master"-user shall apply, I did Code: gconftool-2 --load gnome_settings.xml
While most of the settings were set properly, I am missing the links for Firefox and OpenOffice in the panel which I had configured. How I can copy the Gnome settings from one user to another, including links to Firefox and OpenOffice in the main panel?
