i got basic knowledge about creating a single child from a parent using fork(). But when it comes into creating multiple children, i am simply stuck. I am trying to create two processes from a parent and it would wait for both two processes to finish. my attempt is as below
[Code]....
Consider the following code:
Code:
int main()
{
int i=0;
pid_t pid;
for(i=0;i<2;i++)
[code]....
I get the following output:
Parent: chid_pid=4356 i=0 parent's pid=4355
This is child 4356 i=0
This is child 4357 i=1
[code]....
I can observe instead of two children(as I expect) processes there are three. This is because child process 4356 creates its own child. Why all the messages of the type "This is child X i=Y" are concentrated one under another? How exactly fork works? Is affected by the fact that I have a dual-core processor?
I have a doubt about signals in C programming. I have done this little program to explain it. It creates a child process with fork and, when the child ends, receives the SIGCHLD signal and wait for its termination.Ok, quite easy, BUT when I execute this code the SIGCHLD signal is received twice, first as an error (returns -1) and the second one to finish the child process.I don't understand the meaning of the first received signal. Why is it generated? Is the code wrong? (if you add the SIGINT and press Ctrl+C during the execution it also receives two signals instead of one)
Code: #include <stdio.h>
#include <unistd.h>
#include <string.h>
[code]....
Code:
int main()
{
int pi;
int i=10;
pid=fork();
[code]....
Q 1. The value of the variable pid returned by the fork() function will be greater than 0 in the parent process and equal to zero in the child process? but during forking, there values are exactly copied so what's went wrong here?
Q 2. "changes to the variable in one process is not reflected in the other process" why it is so? >> Even if we have variable i declared as a pointer or a global it wont make a difference.
Code:
int main()
{
int i, pid;
i=10;
printf("before fork i is %d
[code]....
Q. Through this program it is clear that both process is using the data from the same location, so where's the original value is residing when the child process is in execution.?
Now,I created one parent and two children. I must create some value as random in child1 and child1 has to send these values to child2.Child2 must read them.. now,I cant create some random values and i can send them.But child2 doesnt work. I have two functions. One them is writing, another one is reading. Child2 uses reading function,but it doesnt work (child2 cant call it, because writing function in endless loop) What i must do? I used wait,usleep... No way.. I attached my file and also there is code..
PHP Code: #include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <string.h>
#include <signal.h>
#include <stdarg.h>
#include <sys/types.h>
[Code].....
I have written a simple script which has to find required patterns from a bunch of files ( where each file is around 2 GB each,which contain the output of seq 1 10000000000000) on an 8 core machine.I am current forking 6 child processes which run simultaneously on 6 cores of the processor & have to search for the required pattern in 6 different files & inform the parent process when a pattern is found using a PIPE.
The problem is,when a child process is done reading a text file looking for a pattern,it is becoming a zombie process.It exits cleanly when i put a $SIG{CHLD} = "IGNORE"; in the script.Can any one tell me whats going on & how do i improve the communication between child and parent processes?
Code:
#!/bin/perl
use strict;
[code]...
I know that fork() copies the address space of the calling process. Say, however, i have a linked list allocated. Will the list be copied over to the child process's space? If so, i would have to free them in the child process as well as the parent process, correct? Or will the variables be copied but not be pointing to any valid address? Or would it just kind of not do anything?example:
Code:
struct ll_ex {
struct ll_ex * next;
[code]....
I have a root process (on linux) that forks a child and the child process then drops privileges by doing a setuid() to a normal user. After the child setuid()'s, it is of course impossible for it to gain root again by itself. But since the main process is still running as root, i was wondering if there was a simple/smart way of getting the root-master-process to elevate the child back to root (or maybe just to another non-privi uid). Is there some way to do a setuid() on another pid? or maybe something can be done through /proc/<pid>/? Killing the child is not an option (because its what it does today and im trying to find a smarter way). (The program is apache2's mpm-itk worker and the "child" is the actual apache2 process serving a page.)
View 11 Replies View RelatedIm using gdb for debugging my application.. I was able to debug child process(when fork comes) .. and in child process we have an exec call to .... So the problem is, when the control come to exec , the exec process is executing at a time... I could not debug the exec. process... error is stack curruption due to same frame So, is there any way to debug the exec process
View 1 Replies View RelatedI'm writing a sort of toy shell using fork() and execv(). It runs smoothly enough untill the user enters an invalid command at which point the program hangs, so I need a way to check if the program loaded using execv returned correclty or not in the parent process and kill it if it didntI tried writing stderr to a text file to see if something whent wrong but doesnt really work out. Try running ./digenv GDM -i -Q for instance. (-Q is an invalid option for grep which the program runs at a certain point).Heres the code:
Code:
//digenv
//Carl Reg�rdh 2011-03-24
[code]....
I'm trying to write a shell script that do ftp and download file periodically, this script should be called by a daemon running in the background.
the shell script "script.sh" is as follows:
Code:
yafc ftp://test:test@192.168.1.225:21 < commands
and the "commands" files is
Code:
d Root/md5* /
quit
if I run script.sh it will work just fine. But when the daemon software calls the "script.sh", the script will send ftp login request to the ftp server, but will not even answer the username or anything.
I believe it is something about child process redirection, but I don't know how to deal with it.
This problem is not only with yafc, it is the same with any ftp client or any application like telnet and so.
what I am trying to do is to pass an argument to the standard input stream of a child process. I mean I create two programs .. first one invokes the other. second one contains something like
Code:
scanf("%d", &n);
now I want my first program to be able to pass a value to the second one so that it gets stored in n.
I want to kill parent process after "fork()" method. but if I kill parent process with "exit(0)" method, main() thread is terminated as well so child prosess doesn't work anymore. Is there any way to kill only parent process without affecting to child process?
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]....
I am developing a application. In this I fork() 3 childs(lets say child1 , child2, child3) . The parent is now waiting for some input from keyboard.Child3 is continously getting data from child1 and child2 using pipe which it then will print using printf.Now as the parent is waiting for input from user through keyboard while child3 is continously printing the data. I want to do it in different terminals.Can you please guide me how to proceed ahead so that on one terminal , the parent waits for input fromser while on other terminal child3 prints data.
View 1 Replies View RelatedI am going to create a parent process and fork a child process from it. I want to write a code in such a way that whenever my child process end it must indicate that the child process is terminated by a signal or not. This code must be written in the parent process block.
View 6 Replies View RelatedI am troubleshooting something and I got this problem.
If I do "pstree -p"
It shows,
Code:
[code]....
However, it does NOT show up in "ps -elf"
Code:
ps -elf | grep soffi
0 S whho 7734 1 0 80 0 - 36435 - 11:14 pts/2 00:00:03 /usr/lib/openoffice/program/soffice.bin -splash-pipe=5
0 S whho 7833 7759 0 80 0 - 751 - 11:21 pts/3 00:00:00 grep soffi
I was wondering if 7735, 7736, 7737, 7743 were really processes. Then I checked /proc, I could cd to /proc/7735, /proc/7736, etc, but I could not ls them out. I looked at the man page of "pstree", it says,
Code:
Child threads of a process are found under the parent process and are shown with the process name in curly braces, e.g.
icecast2---13*[{icecast2}]
So, what does all this mean? Does it mean that 7735, 7736, 7737, 7743 are just threads but not processes? If so, why could I cd to /proc/<id> but not see them in "ps -elf".
I need to disable file access (fopen, freopen, open etc) for application which is running under chroot jail and with restrictions (rlimit) via execv. Before that I redirected stdin/out to files within jail. I tried this:
Code:
// Redirect stdin/stdout to files
int fd = open (file_input, O_RDONLY);
if (fd < 0)
fatal_error ("input open failed!");
[Code].....
What i am trying to do is i want to add numbers from 1 to 100. but that too using multiprocessing. So i made a c programme and using fork() command made two child processes. Now in one child process i am adding from 1 to 50. and in another i am adding 51 to 100. and then in the parent process adding the two results to get the final one. Now the result from the two function i am getting correctly. But after the wait() call the value returned is lost : See the programme below for reference
# include<stdio.h>
# include<unistd.h>
# include<sys/wait.h>
# include<stdlib.h>
[code].....
Code:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
[code]....
Description of what the code does or what i intended to do:
1. Created a child process from parent process using 'fork()'
2. Sent a signal 'SIGALRM' from child process to parent process using 'sigqueue' function.
(The Third parameter of 'siqueue' function contains the message (message msg) which the child process wants to send to the parent process.'msg' is a stucture instance containing a) pid of child and b) string) 5. Print the 'msg' sent by child process inside the signal handler function 'sig_action_function' of the parent process I am getting some junk value when this line is executed
Code:
printf("%d
",msg->cpid);
I expected to get the pid of child process, which the child process sent to parent process through the signal.
I am going through a multi-step process to produce output files, which involves 25,000 greps at one stage. While I do achieve the desired result I am wondering whether the process could be improved (sped up and/or decluttered).input 1set of dated files called ids<yyyy><mm> containing numeric id's, one per line, 280,000 lines in total:
Code:
123456
999996
[code]....
I've a script that forks to another script.
The problem is that the child will not return to main process.
Main script "fork.sh"
Code:
The child process "smb_fork.sh"
Code:
when running it from the terminal "sh -x ./foork.sh"
Code:
My goal is via cron connect to ~100 remote winXP computers and download a single file. There fore I like to fork the process.
trying to fork multiple child but the program does not go as i want...
My code :
Code:
#include <stdio.h>
#include <sys/types.h>
#include <unistd.h>
[code].....
my code is very simple:
int pid, status;
printf("parent process id=%d, to call fork
",getpid());
if(pid=fork()<0)
[Code].....
but everytime I can only get two fork return pid=0. In parent process, the pid returned by fork() should be >0 and equal to the child process id.
I would like to run versions of Mozilla Firefox 3.6.5+ as a single process, just as it was in versions 3.6.3 and prior. The reason is that, on Linux, I am running within proxychains - which doesn't bind to forked processes. Because the plugins in versions 3.6.5+ run in a forked process I can't use proxychains to redirect Flash streams. Is there a setting in modern versions of Firefox that allow me to run plugins in the main process?
View 1 Replies View Relatedwhat is child process - GE cannot open
View 1 Replies View RelatedWhat happens to a child process that dies and has no parent process to wait for it and what's bad about this?
View 2 Replies View RelatedIn my program, I fork() to get a child process. Because of some problem, child process terminates by a segmentation fault. Parent process is still running. I have compiled my code with -g option. I have done: ulimit -c unlimited. I am not getting core dump of the child process. How can I get the core dump of child process?
View 1 Replies View RelatedI have created three child process from one parent. And different child has different functions. Child 2 has got function to load file called "wc" to count file1 and and its required to get their files by command line arguments. I can get the files through command line but couldn't get the files when child 2 process start.
View 9 Replies View RelatedTerminal will not open
Error message: There was an error creating the child process for this terminal
Got this after doing a update to testing repo; to try to fix another issue with my media player sound not working.
Solved
The_Source_HIM
Just add yourself to 'tty' group and relogin
I get the error
Code:
there was an error creating the child process of this terminal
When I run this code:
Code:
gnome-terminal --window-with-profile=Scripts