Programming :: Splitting A Parent Process Into 2 Child And Then Merging Result?
Sep 15, 2010
What i am trying to do is i want to add numbers from 1 to 100. but that too using multiprocessing. So i made a c programme and using fork() command made two child processes. Now in one child process i am adding from 1 to 50. and in another i am adding 51 to 100. and then in the parent process adding the two results to get the final one. Now the result from the two function i am getting correctly. But after the wait() call the value returned is lost : See the programme below for reference
# include<stdio.h>
# include<unistd.h>
# include<sys/wait.h>
# include<stdlib.h>
[code].....
View 6 Replies
ADVERTISEMENT
Mar 22, 2011
I am going to create a parent process and fork a child process from it. I want to write a code in such a way that whenever my child process end it must indicate that the child process is terminated by a signal or not. This code must be written in the parent process block.
View 6 Replies
View Related
Feb 24, 2010
Code:
int main()
{
int pi;
int i=10;
pid=fork();
[code]....
Q 1. The value of the variable pid returned by the fork() function will be greater than 0 in the parent process and equal to zero in the child process? but during forking, there values are exactly copied so what's went wrong here?
Q 2. "changes to the variable in one process is not reflected in the other process" why it is so? >> Even if we have variable i declared as a pointer or a global it wont make a difference.
Code:
int main()
{
int i, pid;
i=10;
printf("before fork i is %d
[code]....
Q. Through this program it is clear that both process is using the data from the same location, so where's the original value is residing when the child process is in execution.?
View 6 Replies
View Related
Mar 10, 2011
I want to kill parent process after "fork()" method. but if I kill parent process with "exit(0)" method, main() thread is terminated as well so child prosess doesn't work anymore. Is there any way to kill only parent process without affecting to child process?
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]....
View 1 Replies
View Related
Sep 8, 2010
Code:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
[code]....
Description of what the code does or what i intended to do:
1. Created a child process from parent process using 'fork()'
2. Sent a signal 'SIGALRM' from child process to parent process using 'sigqueue' function.
(The Third parameter of 'siqueue' function contains the message (message msg) which the child process wants to send to the parent process.'msg' is a stucture instance containing a) pid of child and b) string) 5. Print the 'msg' sent by child process inside the signal handler function 'sig_action_function' of the parent process I am getting some junk value when this line is executed
Code:
printf("%d
",msg->cpid);
I expected to get the pid of child process, which the child process sent to parent process through the signal.
View 3 Replies
View Related
Dec 17, 2010
What happens to a child process that dies and has no parent process to wait for it and what's bad about this?
View 2 Replies
View Related
Jun 21, 2010
I am trying to kill child process without killing the parent and seem to be having issues doing so. I have tried quite a few different commands and the end result is either killing all of them including the parent or not killing them at all.
View 1 Replies
View Related
Apr 21, 2011
I have a script that calls other scripts/commands which may or may not spawn other process. From my understanding, when I do a ps -ef, the highest numbered process ID is supposed to be the parent ID of all the other related child processes, is this correct? In most or all circumstances, I do a ps -ef | grep <processid> of my script and anything that spawns off that process IDs I assumed are the child processes of my script. If I want to terminate my script and all other child processes, then I kill the parent ID which is the highest numbered PID and this will subsequently kill all other child process IDs, is this correct?
Now, my question is whether there is any quick way of showing what are the child processes of a parent ID instead of what am currently doing now which is visually checking which one is the parent ID and "assuming" that the highest numbered PID is the parent ID of all the other processes. Below is a sample output of running ps -ef | grep exp | grep -v grep. I assume from the output below that the parent process/ID is PID 11322, is that correct?
Code:
oracle 11154 11153 0 21:20 ? 00:00:00 /bin/sh -c (. ~oracle/.profile; /bin/ksh /usr/local/oracle/scripts/expdp_o
oracle 11155 11154 0 21:20 ? 00:00:00 /bin/sh -c (. ~oracle/.profile; /bin/ksh /usr/local/oracle/scripts/expdp_o
oracle 11190 11155 0 21:20 ? 00:00:00 /bin/ksh /usr/local/oracle/scripts/expdp_schema.ksh dev01
oracle 11322 11190 0 21:20 ? 00:00:00 expdp
View 2 Replies
View Related
Dec 7, 2009
Consider the following code:
Code:
int main()
{
int i=0;
pid_t pid;
for(i=0;i<2;i++)
[code]....
I get the following output:
Parent: chid_pid=4356 i=0 parent's pid=4355
This is child 4356 i=0
This is child 4357 i=1
[code]....
I can observe instead of two children(as I expect) processes there are three. This is because child process 4356 creates its own child. Why all the messages of the type "This is child X i=Y" are concentrated one under another? How exactly fork works? Is affected by the fact that I have a dual-core processor?
View 3 Replies
View Related
Jul 22, 2010
I am facing an issue where the process starts hanging. When I closely look at the logs I come to know that some of the child processes that are forked by the parent process are not finished.
1) Is it possible that the child processes that are not finished occupy the socket memory of the parent process and ultimately a point is reached where no socket memory is available to fork new child processes.
2) What is the standard limit of socket memory in linux?
3) What is the fate of such child processes (as I have mentioned above)?
4) How to debug such cases so that the exact problematic area is identified?
View 2 Replies
View Related
Feb 15, 2011
well i have just started with shell scripting...how to find all child processes of a parent process given to script as argument.
View 10 Replies
View Related
May 24, 2010
I have a transparent proxy Squid-3.0 on Slackware 12.2. I used cron to restart squid every day at 7:30 AM (just /path.to.squid/squid -k kill && /path.to.squid/squid) Some days ago I saw in /var/log/messages that Squid was killed but haven't started. I started it manually and everything was OK. But today everything repeated. And the log file is interesting. I tried to find about it on http://squid-cache.org/ but al in vain. This is from /var/log/messages :
Code:
May 24 07:30:02 konura squid[17188]: Squid Parent: child process 17199 exited due to signal 9
May 24 07:30:02 konura squid[19038]: Squid Parent: child process 19040 started
May 24 07:30:03 konura squid[19038]: Squid Parent: child process 19040 exited with status 1
May 24 07:30:06 konura squid[19038]: Squid Parent: child process 19045 started
[code]....
I need to say that I haven't edited the config file for a long time, but this problem started to happen. ADDED, Solved: I'm not sure, but maybe I found the decision. I deleted about 400 mb of Sarg logs from /var partition. And now squid runs well. Besides, before deleting old logs, 'crontab -e' and 'pkgtool' didn't work And the system wrote me that it's no space left on device. At the same time, 'df -h' showed me that all partitions had enough free space. Seems strange, but that's it. After deleting old proxy statistics, generated by Sarg (this is about 400 mb) 1)squid runs OK and 2)there are no more that annoying messages about abscence of free space.
View 1 Replies
View Related
May 23, 2011
I have a doubt about signals in C programming. I have done this little program to explain it. It creates a child process with fork and, when the child ends, receives the SIGCHLD signal and wait for its termination.Ok, quite easy, BUT when I execute this code the SIGCHLD signal is received twice, first as an error (returns -1) and the second one to finish the child process.I don't understand the meaning of the first received signal. Why is it generated? Is the code wrong? (if you add the SIGINT and press Ctrl+C during the execution it also receives two signals instead of one)
Code: #include <stdio.h>
#include <unistd.h>
#include <string.h>
[code]....
View 4 Replies
View Related
Oct 13, 2010
If a process forks its child and communicate with the child using pipe, do closing the write end of the pipe and terminating the writing process have the same effect?
View 3 Replies
View Related
Jun 28, 2010
i need C code to get child pids from its parent pid in linux and in kernel mode, is there anything like getpid() or getppid() which works in kernel mode?
View 2 Replies
View Related
Apr 13, 2010
I am writing a perl script where forking a child and the child is waiting for some response from C++ exe. Here is the code snippet:
Code:
my $retPid = fork;
if ($retPid) {
# I am parent ...
# Install signal handler
$SIG{CHLD} = &REAPER; ...
# sleep for a week (6 hours at a time)
for ($cnt = 0; $cnt < 28 ; $cnt++) {
select(undef, undef, undef, 21600);
last if ( ! -e "/proc/$retPid" ); } ...
} else {
# I am child
($iid, $rc, %data) = $cpp_exe->getResponse(604800); # 1 week timeout ... }
If the cpp_exe takes very long time (around 30 hours) to respond then the perl script (both parent and child) is dieing. The SIG{CHLD} handler defined in parent is not getting called. It seems parent is dieing first then child is dieing (or may be both dieing at the same time). Why the script is dieing?
View 1 Replies
View Related
Mar 16, 2011
I have a problem with the last point of some homework I have for an OS class. I need the program to print the pid upon execution, then for 10 seconds react to SIGUSR1, SIGUSR2 and SIGTERM. If either USR1 or USR2 is received, the 10 seconds are reset. Some of the functions I'm told to use are alarm(), pause() and signal(). The nicest way I found was to handle SIGUSR1, SIGUSR2 and SIGALRM in the parent process, with SIGALRM killing the child (with a SIGTERM). In the child a pause() (or for(; pause() would be enough for it to be alive until killed from the SIGALRM handler in the parent.
What I found is that I can't just do a wait() in the parent process, waiting for the child to be killed, since whenever the parent receives a SIGUSR1 or SIGUSR2, the right handler is called but the child exits nicely. I tried blocking/ignoring those signals in the child, since the default behaviour for SIGUSR1 and SIGUSR2 is to terminate the process, but the result is the same. The only way I could do it is using a waitpid() within a do { } while(!WIFSIGNALED(status)) since when the child gets killed with the parent's kill(), it's WIFSIGNALED, whereas when it exits after the parent handles a SIGUSR1/2, it's WIFEXITED.
P.S. What I'm doing to achieve the expected 10s window is calling alarm(10) in the parent process and again within the SIGUSR1/2 handlers. In the SIGALRM handler I kill the child and within the child I simply do a for(; pause()
View 4 Replies
View Related
Sep 23, 2009
i wanted to capture the stdout and stdin of a child process within a parent so that any output of child is sent to the parent and any input taken from the parent. code is simple enough and i have followed all code guidlines on the internet (some guidlines do differ also) my select call either hangs if i do not give a tmeout and with a timeout it returns 0 descriptors to be written to or read from:
below is the simple code for parent:
int main(void)
{
int outfd[2];
int infd[2];
[code].....
why select hangs without a timeout ... why can it not detect that the pipe is write ready i.e parent can write to it ... if it does not detect tha read pipe as having data...
View 5 Replies
View Related
May 29, 2010
how to split two files like
big.zip.1
big.zip.2
then, my second is how to merge them like windows
in windows, i can use copy /b
in linux,
cat big.zip.1 > big.zip
cat big.zip.2 >> big.zip
View 1 Replies
View Related
Aug 18, 2010
I have a root process (on linux) that forks a child and the child process then drops privileges by doing a setuid() to a normal user. After the child setuid()'s, it is of course impossible for it to gain root again by itself. But since the main process is still running as root, i was wondering if there was a simple/smart way of getting the root-master-process to elevate the child back to root (or maybe just to another non-privi uid). Is there some way to do a setuid() on another pid? or maybe something can be done through /proc/<pid>/? Killing the child is not an option (because its what it does today and im trying to find a smarter way). (The program is apache2's mpm-itk worker and the "child" is the actual apache2 process serving a page.)
View 11 Replies
View Related
Jul 14, 2011
Im using gdb for debugging my application.. I was able to debug child process(when fork comes) .. and in child process we have an exec call to .... So the problem is, when the control come to exec , the exec process is executing at a time... I could not debug the exec. process... error is stack curruption due to same frame So, is there any way to debug the exec process
View 1 Replies
View Related
Mar 28, 2011
I'm writing a sort of toy shell using fork() and execv(). It runs smoothly enough untill the user enters an invalid command at which point the program hangs, so I need a way to check if the program loaded using execv returned correclty or not in the parent process and kill it if it didntI tried writing stderr to a text file to see if something whent wrong but doesnt really work out. Try running ./digenv GDM -i -Q for instance. (-Q is an invalid option for grep which the program runs at a certain point).Heres the code:
Code:
//digenv
//Carl Reg�rdh 2011-03-24
[code]....
View 13 Replies
View Related
Aug 18, 2010
I'm trying to write a shell script that do ftp and download file periodically, this script should be called by a daemon running in the background.
the shell script "script.sh" is as follows:
Code:
yafc ftp://test:test@192.168.1.225:21 < commands
and the "commands" files is
Code:
d Root/md5* /
quit
if I run script.sh it will work just fine. But when the daemon software calls the "script.sh", the script will send ftp login request to the ftp server, but will not even answer the username or anything.
I believe it is something about child process redirection, but I don't know how to deal with it.
This problem is not only with yafc, it is the same with any ftp client or any application like telnet and so.
View 4 Replies
View Related
Feb 7, 2010
what I am trying to do is to pass an argument to the standard input stream of a child process. I mean I create two programs .. first one invokes the other. second one contains something like
Code:
scanf("%d", &n);
now I want my first program to be able to pass a value to the second one so that it gets stored in n.
View 7 Replies
View Related
May 12, 2011
i got basic knowledge about creating a single child from a parent using fork(). But when it comes into creating multiple children, i am simply stuck. I am trying to create two processes from a parent and it would wait for both two processes to finish. my attempt is as below
[Code]....
View 3 Replies
View Related
Aug 2, 2010
I am developing a application. In this I fork() 3 childs(lets say child1 , child2, child3) . The parent is now waiting for some input from keyboard.Child3 is continously getting data from child1 and child2 using pipe which it then will print using printf.Now as the parent is waiting for input from user through keyboard while child3 is continously printing the data. I want to do it in different terminals.Can you please guide me how to proceed ahead so that on one terminal , the parent waits for input fromser while on other terminal child3 prints data.
View 1 Replies
View Related
Jul 30, 2009
I am troubleshooting something and I got this problem.
If I do "pstree -p"
It shows,
Code:
[code]....
However, it does NOT show up in "ps -elf"
Code:
ps -elf | grep soffi
0 S whho 7734 1 0 80 0 - 36435 - 11:14 pts/2 00:00:03 /usr/lib/openoffice/program/soffice.bin -splash-pipe=5
0 S whho 7833 7759 0 80 0 - 751 - 11:21 pts/3 00:00:00 grep soffi
I was wondering if 7735, 7736, 7737, 7743 were really processes. Then I checked /proc, I could cd to /proc/7735, /proc/7736, etc, but I could not ls them out. I looked at the man page of "pstree", it says,
Code:
Child threads of a process are found under the parent process and are shown with the process name in curly braces, e.g.
icecast2---13*[{icecast2}]
So, what does all this mean? Does it mean that 7735, 7736, 7737, 7743 are just threads but not processes? If so, why could I cd to /proc/<id> but not see them in "ps -elf".
View 10 Replies
View Related
Mar 8, 2011
I need to disable file access (fopen, freopen, open etc) for application which is running under chroot jail and with restrictions (rlimit) via execv. Before that I redirected stdin/out to files within jail. I tried this:
Code:
// Redirect stdin/stdout to files
int fd = open (file_input, O_RDONLY);
if (fd < 0)
fatal_error ("input open failed!");
[Code].....
View 6 Replies
View Related
Apr 26, 2011
I have setgid permission on my home directory (/home/XXXX) the permission look like below.
Code:
drwxrws--- 2 toshi jadu 4096 Apr 26 16:54 getset
If I create new directory in this getset folder the permission of getset folder could not inherit.
Code:
#cd getset
#mkdir test2
#ls |grep test2
drwxr-s--- 2 toshi jadu 4096 Apr 26 16:56 test2
As I know the setgid utility allow to inherit the permission from parent directory to child directory.
View 4 Replies
View Related
Jun 1, 2011
I'm in a nested shell trying to use disown to re-root myself as well as a child. Looks like this:
Code:
# echo $$
1234
# disown 1234
disown: job not found: 1234
# disown $$
disown: job not found: 1234
# pgrep mychild
2222
# disown 2222
disown: job not found: 2222
This is in zsh. The goal is to have process 1 (the root of all processes) to become the parent.
View 3 Replies
View Related
