Just installed SUSE11.3 and everything was ok until did initial online update. Following update, YAST will not accept root password when launched from KDE (have not tried other window managers). Dialog box is presented to enter root password. It reports back "invalid root password". But I can run yast or yast2 from command line (as root) and that seems to come up, but not all items seem to work.
I can log in as root with no problem. Only YAST will not accept my password. I'm running KDE on a Dell D610. Ran SUSE 11.0 for several years, absolutely no problem.
I was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
I'm running 64-bit 11.3 on a Dell 1535 laptop.At lunch today, the system booted-up as normal, then shut-down as normal. A handful of updates were installedduring that time.This evening, however, I arrive at the password splash screen, enter my password, and then the system churns a few seconds before resetting the splash screen. No error message, no "wrong password," just a normal splash screen. I tried going into Xen, the default 11.3 and failsafe -- same thing happened with each. When I navigated to the command line, my password worked fine, both for user and super-user.
The login screen does not accept the password for users. Only the password for Root. The problem is not in the command line, but check the password in the screen. I have tried to change the password from the root and it is still the problem. What I can do?
I am trying to be a super user in terminal but I can't. I am sure that I type the correct password, I check also the caps lock button and the language. Also I can't go to the yast. note that the root password is exactly the same as user password
Code: nobani@linux-m9c6:~> su Password: Permissions on the password database may be too restrictive. su: incorrect password nobani@linux-m9c6:~> I am using KDE 4.3.5 on openSUSE11.2
My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
I just set up my Debian 8.3.0 Jessie install a couple of days ago. Today I am having a problem carrying out a command in terminal. All I want to do at the moment is make sure my firewall is active. I log in and out of my computer using the password that I set when I originally installed Debian, and I use the same password in the package updater, but today it would not accept that password in terminal. Here is what I am seeing;
rocky@debian:~$ sudo ufw-enable [sudo] password for rocky: rocky is not in the sudoers file. This incident will be reported. rocky@debian:~$ sudo ufw-enable [sudo] password for rocky: Sorry, try again. [sudo] password for rocky:
i set my pass on ubuntu 10.4 and it work so good on installing app but suddenly it stopped working i thought i would restart my pc i tried to inter my pass again ubuntu don't accept it although it's surely true
I have recently installed CentOS 5.4. I went ahead and enabled encryption for the root partition. everything was fine for the first few days, but today it started refusing my password on boot. The weird thing is after refusing the password several times it accepted it once, then when I rebooted to test refused the password it had accepted moments earlier. I guessed the password file got corrupt or something so I did a clean install. During the install it asked for the password to access the partition and accepted (!) the password. I went ahead and deleted the old partition and reinstalled from scratch just to be sure. And I made extra certain I put in the correct password with no fumble fingers. Sure enough the blasted thing refuses the password I just created during boot. However, if I input the password into the setup it accepts it. What the hell is going on here?
I have just completed a debian netinstall, but am stuck at the "Welcome" screen. Though I took careful notes during the install re the "user account" (did not use my name as my purpose is to get the pc running and give it away) and "user password," it will not accept them. I would like to change or edit both (debian isn't telling me which is incorrect). How can this be done?
Also, this is looking for the "user account" - not the root info, right?
If I am forced to reinstall the OS, will I have to go through the entire process (partitions and all)?
My 1st time using Terminal with sudo it would not accept my password.I use it successfully to log in and is the only password i used during installation.is there a way to get terminal yo accept my password-it does recognize my user name.
I just reinstalled ubuntu lucid after accidentally damaging it, And I used all the same passwords and user names as before, I can login fine, and I can do sudo commands, but the gnome keyring wont accept my password, I tried changing my password using Applications>accessories>Passwords and encryption but that didn't work. How can I fix this so that keyring will accept my password, I need it to save my wireless router password.
For some reason, several irksome changes have occurred. The worst is that it won't let me log in. It will not accept my password.? I was told that if I downloaded Ubuntu, I could use that to get to control panel and fix the problem. After 4.5 hours on another pc, I had the download and the cd does boot Ubuntu. What is my next step I have no working knowledge of Ubuntu.
I recently did a clean install of Maverick Meerkat and copied a few configuration files from my old system. I can log on normally, and the system works just fine. However, when I lock the workstation with any method, the system will not accept my password. I'm certain that I'm typing it correctly (I tried over 20 times) and that the capslock is not on. When I reboot, I can log in again just fine. In other words, my password only works at initial login, not when unlocking the workstation.
After not using Ubuntu for a couple of weeks - suddenly it will no longer accept my username or password- it does not say which one it doesn't like - been using the same ones for 3 years.How can I get in to reset ?It is on a multiboot PC... Ubuntu/WinXP Pro/Win XP home MTIA
I'm using 9.10 most recent updates. I want to connect to a wireless network and get a dialog box offering "WPA & WPA2 personal" as the only choice. The passphrase I was given is 6 letters but the "Connect" button does not light up until I get to 8 when entering wpa/wpa2.
Do I need to convert the passphrase somehow?
Atheros 9k and Linksys "Wirelss G router with SRX200".
I had 9.04 64-bit with / and /home in separate partitions. Today I used 10.10 alternate install to install a command line system. Then installed gnome-core, synaptic, gparted, and a few other things. Now when I go to System > Administration > Synaptic Package Manager or to Gparted, I am asked for the "administrator password". I type in my password, but it is not accepted. However, from a terminal I can "sudo synaptic", give my password, and install whatever I want.
It's a pretty weird issue I'm having, when I need to provide access for a command in terminal IE: something using sudo, it just doesn't accept text. I thought it might be my keyboard at first (g15) but I tried copying and pasting the password into there and it just wouldn't do anything except for remain blank
Strange thing happend two days ago. I just wanted to reboot my computer and now I'm no longer able to boot o0. My system is runnig with a full encryption with luks/cryptsetup. I'm using a passphrase to unlock my first partition and it will unlock the others by itself. So far so good. But now it doesnt work anymore... I'm not sure what I did before, but what I know, I didn't change anything! about cryptsetup. I did only a little "update" with the recommended packages from the repositories (guess only 4-5 updated)
I already checked with live cd and same thing there. Not able to unlock any device (what seems strange to me, cause there are 4 of them and all corrupted at the same time...?)
I always get the error message: unlock failed, bad password or options? (on boot) Command failed: No key available with this passphrase (live cd)
First thing I did was checking wheter all modules are loaded:
Code: ubuntu@ubuntu:~$ lsmod Module Size Used by sha256_generic 11580 0
I installed a command-line version of Ubuntu 10.04 using the Alternate CD. The machine was wiped, and I used most of the default settings.
I used a thirteen character user id which consisted of mixed case letters and numbers, and an eighteen character password that contains mixed case letters and numbers and a # sign.
When I rebooted, the command-line login would not accept my password. I assumed I had somehow made a mistake, and just wiped the machine again and reinstalled. This time I was very careful with the user name/pw.
Again, the command-line login did not accept my password!
On a hunch, I took an old Ubuntu 7.10 Alternate CD and erased the machine again. I installed a command-line version of Ubuntu. AGAIN --- it will not accept my password even though I'm 100% sure it is correct.