My 1st time using Terminal with sudo it would not accept my password.I use it successfully to log in and is the only password i used during installation.is there a way to get terminal yo accept my password-it does recognize my user name.
View 2 RepliesI've read through some threads here but the problem I'm having doesn't seem to be the problem others are having.
I just reinstalled 10.04 today after my last installation messed up after a month.
early when I first installed the terminal and sudo were working perfect but now, this is what I'm getting:
[sudo] password for dimebag:
<password>
Sorry, try again.
[sudo] password for dimebag:
[Code].....
I tried every solution I saw and nothing works. I've been having a heck of a time trying to install things.
I just set up my Debian 8.3.0 Jessie install a couple of days ago. Today I am having a problem carrying out a command in terminal. All I want to do at the moment is make sure my firewall is active. I log in and out of my computer using the password that I set when I originally installed Debian, and I use the same password in the package updater, but today it would not accept that password in terminal. Here is what I am seeing;
rocky@debian:~$ sudo ufw-enable
[sudo] password for rocky:
rocky is not in the sudoers file. This incident will be reported.
rocky@debian:~$ sudo ufw-enable
[sudo] password for rocky:
Sorry, try again.
[sudo] password for rocky:
How do I use terminal? What password am I to use?
It's a pretty weird issue I'm having, when I need to provide access for a command in terminal IE: something using sudo, it just doesn't accept text. I thought it might be my keyboard at first (g15) but I tried copying and pasting the password into there and it just wouldn't do anything except for remain blank
View 3 Replies View RelatedI was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies View RelatedI am pasting sudo commands without problems as a user (ales in my case) and then immediately the ask the user password.
The keyboard seems to be dead, no keys work, not allowing me to enter the password.
I can log into the user directly, ssh, but can't su to anyone
My problems: When i try to so su to any of the user I get this message
Also when screen saver is lock it won't accept my password as well
Example:
Steps and other way I have try to get this problem fix but fail
1] boot up a working version machine and look at
2] check the permission and the sticky bit on /bin/su file
3] went and copy the entire /bin; /usr/bin ; and /etc/pam.d from a working system over the the failed system and it also doesn't help
I am new to fedora (been using debian based distro's for the longest time). With the new release I decided to give FC13 (The kde 64 bit spin) a try. I told it to wipe my entire hdd and encrypt the partitions. The partition manager made a few LVM partitions which I assume are encrypted.
The problem I am having is that if I attempt to use an application that would normally need root access to run, I am not prompted to enter my root password. Instead, I am required to logout and log back in as root. Is there a way to make it so that FC13 will prompt me to enter in my root password so I do not need to log in and out? Or is there something Different I should have done during the install process? Also, what is the terminal equivalent of "sudo" in fedora, or is it still sudo/KDEsudo
I also have not used SE Linux before. Do I need to manually enforce the permissions for my applications and generate my own profiles for it, or is that done automatically?
I made it just like the example in visudo, but every time I exit I get an error: sudoers file: syntax error, line 87 <<<
I have tried it on several machines and always get the same thing, yet it is exactly like the example. Has anyone got an Idea what I am doing wrong ?
I need to run a command in a terminal, but cannot get root. I can in "Add Software" to install, I know and tried all the passwords I know from the install, but no show.What can I do?I tried sudo password, then typed in the space, no letters appear, but no success.TO "sudo password" after putting is my password, my username comes up and it says I am not in sudoers file.My Laptop has only one user, I know as I tried switching for a test.
View 12 Replies View RelatedI want to use root password instead of adding my user to the list of sudoers,In Arch wiki ander Root password:Users can configure sudo to ask for the root password instead of the user password by adding "rootpw" to the Defaults line in /etc/sudoers: but that did not work for me. it asks for root password.Why do I want to do that:
1. I want to do that, I like sudo more than su -c 'some_command'.
2. sudo enables bash completion, su -c does not.
3. I don't want to add my user to sudoers list.
I found many users Suggesting alternatives and lowering the important of my need for this, when I asked this question in anther please.
It seems that every time I use the 'sudo' command I have to type a password. Is there a way to get 'sudo' to remember the password at least for the current session after I use it once or something like that?
View 14 Replies View RelatedI have written a tiny script which switches between 2 CPU frequency throttling governors. Now I need to assign it to a shorcut key though "Preferences->Keyboard Shortcuts".
Here is the script:
Code:
#!/bin/bash
if [ `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor` = 'ondemand' ]
then
[code]....
As you can see this script involves sudo. I know that usually running commands with sudo requires "Run in Terminal" option for a shortcut, but in "Keyboard Shortcuts->Add" there is no option to run command in terminal. When I double click on the script and choose "Run in Terminal", then it functions as it should. How can I make this script execute by doing "Run" and not "Run in Termnal"?
A little while ago I moved to F14 from Ubuntu; I've been ok, but recently sudo has been causing me trouble :/It seems to hang, but eventually produces some output indicating that it has been waiting for me to input a password; but it hasn't prompted me for one.
$ sudo ls
Sorry, try again.
Sorry, try again.
Sorry, try again.
sudo: 3 incorrect password attempts
i set my pass on ubuntu 10.4 and it work so good on installing app but suddenly it stopped working i thought i would restart my pc i tried to inter my pass again ubuntu don't accept it although it's surely true
View 7 Replies View RelatedI have this issue on both Ubuntu and Lubuntu 11.04 64-bit on 2 different machines. I have not tested 32-bit.
When I run synaptic or update-manager it presents me with gksu, not gksudo as it previously did in previous Ubuntu releases, no matter how many times I try it will not accept my password.
I have even given it command line arguments to print the password to the terminal and it's correct.
I have found a workaround - by running gksu-properties and changing the mode from su to sudo it will now display gksudo and accept my password.
However, I want to know why it won't accept my sudo password for the su and gksu commands? There are no error messages which are outputted, the gui just says incorrect password.
I installed Asterisks On a VM machine.
The asterisk I downloaded came with Centos 5.3 It runs well on VM console But the problem is when It request for localhost login which accepts input but the password does not accept input at all.
I have recently installed CentOS 5.4. I went ahead and enabled encryption for the root partition. everything was fine for the first few days, but today it started refusing my password on boot. The weird thing is after refusing the password several times it accepted it once, then when I rebooted to test refused the password it had accepted moments earlier. I guessed the password file got corrupt or something so I did a clean install. During the install it asked for the password to access the partition and accepted (!) the password. I went ahead and deleted the old partition and reinstalled from scratch just to be sure. And I made extra certain I put in the correct password with no fumble fingers. Sure enough the blasted thing refuses the password I just created during boot. However, if I input the password into the setup it accepts it. What the hell is going on here?
View 2 Replies View RelatedI have just completed a debian netinstall, but am stuck at the "Welcome" screen. Though I took careful notes during the install re the "user account" (did not use my name as my purpose is to get the pc running and give it away) and "user password," it will not accept them. I would like to change or edit both (debian isn't telling me which is incorrect). How can this be done?
Also, this is looking for the "user account" - not the root info, right?
If I am forced to reinstall the OS, will I have to go through the entire process (partitions and all)?
Just installed SUSE11.3 and everything was ok until did initial online update. Following update, YAST will not accept root password when launched from KDE (have not tried other window managers). Dialog box is presented to enter root password. It reports back "invalid root password". But I can run yast or yast2 from command line (as root) and that seems to come up, but not all items seem to work.
I can log in as root with no problem. Only YAST will not accept my password. I'm running KDE on a Dell D610. Ran SUSE 11.0 for several years, absolutely no problem.
I'm running 64-bit 11.3 on a Dell 1535 laptop.At lunch today, the system booted-up as normal, then shut-down as normal. A handful of updates were installedduring that time.This evening, however, I arrive at the password splash screen, enter my password, and then the system churns a few seconds before resetting the splash screen. No error message, no "wrong password," just a normal splash screen. I tried going into Xen, the default 11.3 and failsafe -- same thing happened with each. When I navigated to the command line, my password worked fine, both for user and super-user.
View 9 Replies View RelatedI just reinstalled ubuntu lucid after accidentally damaging it, And I used all the same passwords and user names as before, I can login fine, and I can do sudo commands, but the gnome keyring wont accept my password, I tried changing my password using Applications>accessories>Passwords and encryption but that didn't work. How can I fix this so that keyring will accept my password, I need it to save my wireless router password.
View 1 Replies View RelatedFor some reason, several irksome changes have occurred. The worst is that it won't let me log in. It will not accept my password.? I was told that if I downloaded Ubuntu, I could use that to get to control panel and fix the problem. After 4.5 hours on another pc, I had the download and the cd does boot Ubuntu. What is my next step I have no working knowledge of Ubuntu.
View 5 Replies View RelatedI recently did a clean install of Maverick Meerkat and copied a few configuration files from my old system. I can log on normally, and the system works just fine. However, when I lock the workstation with any method, the system will not accept my password. I'm certain that I'm typing it correctly (I tried over 20 times) and that the capslock is not on. When I reboot, I can log in again just fine. In other words, my password only works at initial login, not when unlocking the workstation.
View 4 Replies View RelatedI have an Ubuntu 10.10 box authenticating Users against an LDAP server. User authentication works fine - ssh, console or Gnome.
The only place it has an issue is when the gnome-screensaver is activated and locks the computer. When I try to enter the correct password at this point I get these error in the logs;
Dec 20 14:42:23 box-ubuntu unix_chkpwd[12240]: password check failed for user (myname)
Dec 20 14:42:23 box-ubuntu gnome-screensaver-dialog: pam_unix(gnome-screensaver:auth): authentication failure; logname= uid=10038 euid=10038 tty=:0.0 r
user= rhost= user=myname
Dec 20 14:42:23 box-ubuntu gnome-screensaver-dialog: pam_ldap(gnome-screensaver:auth): Authentication failure; user=myname
[Code]....
After not using Ubuntu for a couple of weeks - suddenly it will no longer accept my username or password- it does not say which one it doesn't like - been using the same ones for 3 years.How can I get in to reset ?It is on a multiboot PC... Ubuntu/WinXP Pro/Win XP home
MTIA
was just working the other day, now no command, even cd.. wont work...how can I fix this?
View 9 Replies View RelatedI needed to use Synaptic Package Manager to install an app, but the dialog box ("enter the Administrative Password") that pops up before you can use Synaptic doesn't recognize my password ("incorrect password). I tried typing it into a text editor and it's spelled right, caps lock not turned on or anything.
In Terminal, sudo recognizes it, and it is recognized when I log into Ubuntu. I'm the sole user, I have admin privileges, I've been doing admin things.
I just now did System > Administration > Users and Groups and got a dialog box saying
"Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Server ping error: IDLmg.org/CORBA/COMM_FAILURE:1.0)"
Moving past that, I changed my user password, and Ubuntu authenticated it.
How do you launch Synaptic Package Manager from the command line?
I'm using 9.10 most recent updates. I want to connect to a wireless network and get a dialog box offering "WPA & WPA2 personal" as the only choice. The passphrase I was given is 6 letters but the "Connect" button does not light up until I get to 8 when entering wpa/wpa2.
Do I need to convert the passphrase somehow?
Atheros 9k and Linksys "Wirelss G router with SRX200".
I had 9.04 64-bit with / and /home in separate partitions. Today I used 10.10 alternate install to install a command line system. Then installed gnome-core, synaptic, gparted, and a few other things. Now when I go to System > Administration > Synaptic Package Manager or to Gparted, I am asked for the "administrator password". I type in my password, but it is not accepted. However, from a terminal I can "sudo synaptic", give my password, and install whatever I want.
View 9 Replies View Related