I set my mom up with Linux mint 9, and I am wondering how to add a 250G hard drive to it.(On slackware it was easy on ubuntu and Linux mint its is very difficult, because of the addresses.) Is there some easy way to add it to format/check for bad blocks. One more thing I don't want to deal with addresses so is there some easy way to do that?
View 3 Replies
I have a 2TB Western Digital USB drive. This has been previously connected to a Windows box without problem. I have connected it to my Linux slackware distro computer. It mounts OK, but is only mounted read-only. Kernel version is Linux 2.6.21.5-smp.
fdisk -l gives:
Disk /dev/sda: 1999.6 GB, 1999696297984 bytes
255 heads, 63 sectors/track, 243115 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code].....
Why can't I mount this things read-write? I can read and write just fine to this device mounted on windows. I can even read/write to this Windows mounted drive from linux when I mount it using mount.cifs Also, mounting a USB flash drive as: mount /dev/sdb1 /mydir, works fine. I can read/write to /mydir.
I have Fedora 11 running on my server and I am trying to use an external WD 160mb usb fat32 drive. When the drive first fires up I am able to see the root file system, but then it fails. Thanks Rondo
Here is my fstab file
PHP Code:
[code].....
I am using Ubunto 10-04 LTS and trying to connect to Western Digital (World Book) network drive. By signing into Mionet I am able to reach this drive on my network and remotely. Trying to run the executable resulted in the following error:
"The file '/media/Disc 1 290909/WDAnywhereAccess_3_6_0.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit."
I am wondering if any of you technical guys would be willing to format my Western Digital external USB 1.5 TB Hard Drive to Linux EXT3. I am naturally happy to pay for your time and trouble and for postage. The WD drive is for storing video footage and will be connected to my Humax Freesat HD Digital TV Box(not a computer), and the Humax Box will only record high deffination programmes in EXT3 format. I've tried to do the job myself with my PC, but have failed to change my system to format in Linux.
View 5 Replies View RelatedI'm actually not a Linux newbie, but I'm DEFINITELY no expert either... I'm trying to copy all my data(approx 50 GB) from a usb drive(western digital 250GB) with ntfs partition in one go... The problem is that it only fails for big transfers... works fine for smaller transfers like 1Gigs or less... I have just one internal hdd partitioned into two ext3 partitions.. so I have sda1(Primary.. mount pt /), sda2(swap) and sda3(mount pt /piyush)... The usb drive comes up as sdb(sdb1).. just has one ntfs partition... I've also installed the ntf-3g drivers.... but doesn't seem to work... I've also noticed that when the machine hangs and I try to shut down, it fails and I get a message again again... (sdb1- no sense detected) or something like this... don't remember the exact message... will post the exact one if no one is able to figure out what's wrong...
View 4 Replies View RelatedI bought a Western Digital 1TB external hard drive to use with a Gentoo build. It connected beautifully, mounted visibly but despite being mounted read/write any attempt to write to it produced the error "read-only file system". I chased a number of red herrings before I found that the drive comes with an NTFS filesystem and NTFS support in my kernel was set to read-only, which I think was a default setting. Simple fix was to install a different file system - as it was a new drive there was no old data to lose.
View 1 Replies View RelatedI'm running a dual partitioned (Vista / Fedora 11 x86_64) Intel X25-M Mainstream SSD.
Whilst Vista boots in about 15 seconds, Fedora takes around twice as long; in fact far longer than Fedora 9 on my old Western Digital Raptor drive.
Is this to be expected, or might I have some sort of configuration problem? Has anyone else had similar experiences?
Error mounting: mount exited with exit code 12: Failed to read last sector (3907027119): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sdb1': Invalid argument
[Code]...
Alright I am about to throw this western digital device out the door and drive over it. The back story is that I have done a Debian net install on an older tower PC laying around the office. I am going to use this tower as an FTP server to store and backup several other servers we have have. We also have an older Western Digital (WD) my book 1110 sitting here. I was planning on using the external storage as the repository as it is 1TB raided. Seems like a good plan, plug the device into the tower and instantly two new drives show up "External CD-ROM" drive: "WD Smartware" and then "My Book". When I click on the cd rom drive I get the .pdfs and executables that are stored on the device. However when I click on the "My Book" drive I get the message "Invalid mount option when attempting to mount the volume 'My Book'.".
View 7 Replies View Relateduser@debian:~# mount -t ntfs /dev/sdb1 /media/cdrom
#To check what is mounted
user@debian:~# mount
/dev/sda5 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
[Code]...
The question is how do I get the system of WD to load onto Debian 2.6.26-2-686? I am guessing either the version of Debian Lenny I have is too old to be compatible?
Am trying to upgrade my HDD and wanted to make a choice between the two, anybody have any pointers on which is best.
View 6 Replies View RelatedUbuntu 10.04 LTS on VirtualBoxVM
Western Digital MyBook Essential 2TB USB
Want to format and partition the external hard drive for USB storage for DD WRT (i.e. into ext3)The drive is MS-DOS (FAT32) - Using Disk Utility (MAC) i erased what was on the drive.It mounts properly and can be accessed on the Mac OS.Upon plugging the USB into the Mac, the drive does not show on the Ubuntu desktop.Under the USB icon (bottom right) it indicates no USB devices attached however the "Western Digital My Book [0175]" is greyed out.
Going "Places" > "Computer" Only "File System" visible.
GParted - Drive not visible (only /dev/sda)
Using the sudo fdisk -l:
Disk /dev/sda: 3221 MB, 3221225472 bytes[code]...
how to connect Western Digital MyBook 2TB USB external storage in ubuntu 6.10
View 2 Replies View RelatedMy Western Digital My Book World Edition II enclosure failed recently and as normal, WD support sucks. A friend told me he salvaged his by looking at the individual disks with Linux. How can I recover the disks, which seem to be fine.I can put them into an enclosure that supports JBOD and Raid 1 and it will see the drives when hooked up to a Windows XP system. It does not see anything on the drives but it knows they are there. I have a copy of some data recovery software Easus Data Recovery Wizard and it finds loads of data on the drives but recovery, according to the timer, will take weeks.How can I make Ubuntu see each drive and mount it?
View 1 Replies View RelatedI need to be able to schedule and automate the recording process, to record DV with audio directly to the hard drive. Can anyone tell me if this is possible with linux? Can anyone suggest hardware/applications that would work to accomplish this? This is not for security purposes. This is to record classes that will be made available online.
View 1 Replies View RelatedI posted this here because I think Linux Mint is based off of Debian, am I wrong? Anyhow I installed mint to a seperate partition next to windows on my computer. I had my external unplugged at the time... It was actually plugged in at my neighbors. They where watching a movie I had on it; anyhow I plugged it back in went to bed woke up and it took out its own partition on the external.
View 2 Replies View RelatedI have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
I am having a problem booting my PC after adding a new SATA drive.
The PC has 3 drives.
SDA is a 500Gb SATA drive
SDB is a 1Tb SATA drive
SDC is a 160Gb IDE drive
The PC boots from the 160Gb IDE drive.
If I now install a 2Tb SATA drive the boot fails, it starts off OK as in the Motherboard boots from the IDE drive but sometime into the boot the / directory cannot be found.
If I boot from a live disk and check out the disks with gparted, I find that the new 2 Tb SAta drive is SDC and he 160Gb IDE drive is now SDD. I expect this is my problem but I cannot work out how to change it.
Note fstab is using UUID designations - not sure if this is relevant.
I've just bought a reconditioned PC but the HDD is of very small capacity. I have the hard drive from my old
PC before it died, and it has all my work on it. Can I simply cable up my old HDD in my new-ish PC so that I can access all the material on my old hard drive; the old drive is much larger and has spare capacity on it which I would like to use. Both HDDs are IDE, and the OS is Ubuntu 10.4.
I have an old Linux server, but now the hard drives are reformatted. I want to use this as a test server before I do anything on our live server. Our live server is running CentOS 5 so I would like to install CentOS 5 on this server, however the mother board does not seem to recognize the CD ROM any more, and I have tried other CD ROMs - So, the .iso file I down loaded from CentOS's mirrors can't be installed that way.I have a windows machine and I was wondering if I could just dump the .iso file onto one of the reformatted hard drive and then reinstall it into the server?
View 2 Replies View RelatedI just added a new hard drive an I am in gparted and when i try to create a primary partition I can only choose hfs, what am I doing wrong? I want to create ext3 or ext4
View 1 Replies View RelatedI ran out of space on my /home directory and added a drive. I've got it in my fstab file but how do I get Ubuntu to add the space to my /home? The line I put in fstab is:
/dev/sda5 /media/mynewdrive ext3 defaults 0 2
I need some help on this one. I added an second internal hard drive to my file server, a 500GB WD. I want to use this drive as the primary storage drive for my file server, and I want to format it with XFS. I've found some guides showing me how to add hard drives, but they didn't really fit what I want to do. When I run fdisk -l this is what I get
Code:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0001af4f
[code]....
Disk /dev/sdb doesn't contain a valid partition table
Adding a Second Hard Drive?
View 2 Replies View RelatedWhat can you do with adding a second hard drive..?
View 7 Replies View RelatedI just switched to ubuntu and i love it!! The installation went flawless but i had a second hard drive while i had windows vista to store all of my media, i.e. mp3 and pictures. Am i able to access the stored information on the second hard drive in ubuntu? Will i need to delete the partition in order to use the second hard drive for future use? The second hard drive shows up in the disk utility application, but not in the computer/file browser section. The file system for the second hard drive is hpfs/ntfs.
View 3 Replies View RelatedHow do I add another Windows XP SATA Hard Drive to this Grub menu, on a USB Stick?:
timeout 30
default 0
#
[code]...
I added a formatted LVM hard drive ( hdb: WDC WD800BB-55JKC0, ATA DISK drive) to my current server. I need to review its contents, save any data I need, and then reformat the drive and extend the current systems LVM to include the new drive. I am unable to mount the new drive using the following steps and need to mount the LVM new drive. As I explain below, I have learned that I am not supposed to directly mount an LVM volume. Here is the work I have done to date,.
1. MAKE SURE THE DRIVE IS FOUND:
dmesg | grep drive
hda: MAXTOR STM3160215A, ATA DISK drive
hdb: WDC WD800BB-55JKC0, ATA DISK drive
[Code].....
