Here is a copy of my fstab # /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
[code]...
I have an apache installation with /var/www/bob as the document root and the only site served up. I have bob as the directory's owner, and he is able to upload his files to that folder via ftp (vsftpd on the server). When a browser tries to access the pages, it simply gets a 403 forbidden. The problem occurs when apache2 tries to access the files bob uploads. The www-data user (Apache daemon) gets permission denied when I try to cat bob's files in the shell, so it's purely a permissions issue. What I can't figure out is how to give the Apache daemon the ability to read bob's files while also making certain it does not have the ability to modify any of them.
View 1 Replies View RelatedI am trying to use scp in order to copy files from an ubuntu machine to my Android phone. I use connectbot to log in to my ubuntu. However, when I use scp I get an error as if the destination does not exist. The destination is /mnt/sdcard/download on myAndroid 2.2.
View 1 Replies View RelatedI can't perform any of those.Except from the Terminal.I didn't edit any permission... nor installed anything.Don't know what to do.Also, "Move to Trash" appears grayed out, in the right-click menu (for all the files/folders).
View 8 Replies View RelatedI can't copy a few files from my pen drive. Got the files from a public computer, with windows. I use fedora 10.
cp gives the following error--->
cp const1.java /home/user1/Documents/scjp
cp: cannot open `const1.java' for reading: Permission denied
lsattr shows this--->
lsattr const1.java
lsattr: Permission denied While reading flags on const1.java
mount shows this--->
/dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
Whenever i copy ELF or BIN files from the filesystem of linux i must get permission denied. For this case i have gone through the linux security module but didn't get much help regarding the permission denied only in case of copy of ELF and BIN files from filesystem. how can i proceed in this. WORK DONE:
1. Downloaded linux-2.6.25.14
WORK NEEDS TO BE DONE:
1. compile the kernel with some modifications in linux security module to get the desired results but this time i am unaware of that.
I have a droid phone, and I have ubuntu 9 running on it. This is done by chrooting since the phone runs a linux kernel. And it works... I have a question though. tightvncserver does work, and its able to listen on 127.0.0.1.. Its how you view your X session. So you chroot to Ubuntu, then start vncserver. Then switch back to android and login to ubuntu via vnc client. but apache, mysql, and postgresql do not work. Well. They dont seem too.. except for mysql. Mysql will start but only if you tell it not to use networking by saying skip-networking in my.cnf
Mysql says: mysqld cant create ip socket permission denied Apache2 says it can find 127.0.0.1 but doesnt actually run same with postgresql... All seem to be compiled with arm architecture. So why does tightvncwork? Why is it so special? How can it listen on the loop back (127.0.0.1) when nothing else can...
I have /proc and /dev bind to the chroot side. I can run ifconfig okay, and I can run /etc/init.d/networking start okay.. But apache2, mysql, etc have problems binding. I have removed apparmor even though technically its not running, but I removed it and its configuration files, just because I thought perhaps mysql looks at apparmor, but I doubted it.
Tryin to update guest additions to match new host. Change fstab to allow exec. Still get permission denied.
debian:/home/bill# cd /cdrom
debian:/cdrom# ls -lh
total 30M
dr-xr-xr-x 3 root root 2.0K 2009-12-17 07:37 32Bit
dr-xr-xr-x 2 root root 2.0K 2009-12-17 07:37 64Bit
-r-xr-xr-x 1 root root 217 2009-12-04 04:06 AUTORUN.INF
[Code]...
Im running Ubuntu 10.10 on my hp mini 110 netbook, have been for since i upgraded from 10.04. The problem Im having all of a sudden is when I try and copy anything from internal file system, to anything external [phone, card reader, usb hardrive] I get a pop up that says Error opening file '/media/disk/<filename>': Permission denied
Should be a quick fix i would think, what you guys got ???
I am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file:
-rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
Running Ubuntu 10.04 I logged into (sudo?) (root?) using:
Code:
sudo -s
and then entering my password.
I navigated into the home folder and viewed the long listing of it's contents using:
Code:
root@host:~# cd /home; ls -l
total 4
drwxr-xr-x 65 uname uname 4096 2011-05-22 17:14 uname
[Code]...
Used to be, when I connected my phone and turned on USB Storage, it would automount, and I'd get a popup window asking me what I wanted to do (open and view files, or import photos with gthumb). I would just choose open and view files, move photos, music, etc. back and forth...
I would see the device listed in pcmanfm or thunar. Now, nothing happens. I do not get the popup, nor see the device in any file manager, etc. When I do fdisk -l, I do not see the phone listed, but when I do lsusb, I do see it.
Code: Select allBus 008 Device 067: ID 0482:0734 Kyocera Corp.
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
It's a Kyocera Hydro Elite, an android device, set for USB Mass Storage upon connection. The phone knows when it's been connected and gives me the option to turn on the mass storage, which used to trigger the popup on the computer, but the computer no longer responds.
I have thunar-volman and mtp-tools installed.
I don't seem to have any relevant entry in /etc/fstab. Not sure if I did before upgrading to jessie from wheezy or not... I don't believe so...don't think an upgrade would wipe anything from there.
Why I'm not getting access to the phone now? Or how I can mount it without knowing it's location from fdisk? I do not use gnome, but rather plain openbox.
Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
View 1 Replies View RelatedI'm using my phone with TrekBuddy to contribute to Open Street Map and find it a bit awkward to bluetooth or removing the memory card from the phone to use USB directly. So I've been struggling some time to solve this issue, without any luck.Contents from my TrekBuddy directory on the memorycard on phone:Quote:
> ls -l
totalt 382
-rw-------. 1 dag dag 195409 2010-07-11 13:28 20100711-123727.gpx
[code]....
I just installed Apache2, PHP5 and MySQL on my Ubuntu 9.10. I have about 200+ .php format files of my site (including index.php) which I need to copy to var/www.
But the permission is denied.
I'd like to view the log files, but when I try to view a log (such as daemon.log), I receive a message that says "You don't have permission to read the file." What do I need to do to have permission? (This is my computer. I've been an Ubuntu user for less than a year
View 3 Replies View RelatedI am not sure if this is posted somewhere else, if it is sorry. Anyways I downloaded files to my desktop from firefox and i need them to be in usr/local file, but if i try to put it in there it tells me permission denied. Is there anyway around this?
View 5 Replies View RelatedI have some files lying around in /root/bla/, all these files are 644 and /root/bla/ is 755. Still, when I try (as a different user) to cp /root/bla/file ., I get a "cp: cannot stat: Permission denied". I also cannot ls /root/bla/, I also get a Permission denied... what gives?
View 3 Replies View RelatedHow is it possible that I get perm denied when I'm copying files in console.
View 1 Replies View RelatedI had ubuntu 9.04 on a laptop, and it kept crashing, so I removed the harddisk, connected it via a Sandberg Harddisk to USB stick, and it works when I connect it to another ubuntu (running from livecd), but some of the files are locked, and I cannot open them copy them or anything else. What do I do?
View 2 Replies View RelatedI have a dual boot Dell Studio laptop with Windows (VISTA) and Ubuntu (9.0.4) installed on it. I have recently installed Ubuntu to make it a dual boot. Before that I was using LiveUSB Ubuntu image for six months (without any problems).
During the installation of Ubuntu, I created a Linux partition of 2GB for Ubuntu installation (assuming that it was running successfully on my 2GB USB drive). All of my other work (e.g. documents/programming projects etc.) are stored on the Windows partition (which is loaded during the boot time automatically). The problem is that I get a "permission denied" error while running any executable file on the Windows partition. But if I copy the same executable on the Linux partition, everything works perfect. Am I missing something here?
I have verified that the executable have necessary execute permissions.
I have my ubuntu comp setup as a media server and works fine with mythtv etc but I also want to access the files from my computers in the other rooms (most have windows 7). I was able to share the file containing the videos easy enough by right clicking the file and checking all of the sharing options the first time. I have been able to access all the files that i originally put in the folder and stream video to my other computers without issue.
However any new files I add to the folders I am now unable to access. The files show up but when I click on them it says I don't have permission. I have tried unsharing the folder and redoing it but I come to the same issue. I am sure I am just forgetting an easy step but I can't think of what that is. Also want to make sure that any new files I add to this folder will work instantly across the network.
I am trying to run matlab 7.7 (R2008b) on my ubuntu 9.10 distribution..the thing is that I am totally new with both matlab and linux and I get the following error message from matlab when I try to run an example mex-function:
>> mex yprime.c
/home/margareta/Desktop/matlab/bin/mex: 1572: gcc: Permission denied
Warning: You are using gcc version "". The earliest gcc version supported with mex is "4.0.0". The latest version tested for use with mex is "4.2.0". To download a different version of gcc, visit [URL] eval: 1: gcc: Permission denied mex: compile of ' "yprime.c"' failed. Error using ==> mex at 213 Unable to complete successfully.
I had gcc-4.4 as default on my pc, so after this error I downloaded an older version (gcc-4.1) and removed with rm the symbolic link in /usr/bin pointing to gcc-4.4 and created a new one pointing to gcc-4.1. Now when I type gcc -v in the terminal it says that gcc is in the packages gcc and pentium-builder, to do an apt-get install. I tried that but than it says that gcc-4.1 is already the newest version. It seems that I have multiple versions of gcc installed but neither the terminal nor matlab can find them.
I am in the process of setting up a new server (Debian - Lenny - now updated to Squeeze) and every things were going fine. But unfortunately from today , whenever a user login to ftp, it says
550 permission denied and not able upload / edit or remove any files ( i am able to see all files and folders)
Yesterday it was working fine..
I tried using bot Pure Ftp and Proftp and the issue is common
What I am trying to do is
add a unix user exalmple through adduser command with default directory for the user as /var/www/example.com (shell enabled)
owner of example.com is example
and using the above user name and password to ftp files to the folder
I have setup my debian 8 web server.
For some reason I am having some issues with permissions of some images. They don't render because they are not set to 644. Now for some reason when I uploaded these files onto my shared hosting with cPanel the files work fine and permissions are fine. I can see there is a permission issue for the files locally on my Mac (OS X - El Capitan).
When I changes these locally on Mac the permissions go all weird and are prefixed with Custom, rather than mac-user-name: Read & Write, staff: Read, everyone: no access. then changes to custom: read & write etc. So then i tried changing permissions on web server see below and I get permission denied and after all the files are gone, i can't delete the images folder through SFTP or SSH. I changed back the image to 755 and tried deleting and still nothing. Not sure what the problem is. Before I chmod I checked that the images are set to the correct user and group as per the rest of the site.
So I try:
Code: Select alluser_name@debian:/var/www/html/_files$ chmod -R 644 images
and I get this return:
Code: Select allchmod: cannot access ‘images/box-icon.svg’: Permission denied
chmod: cannot access ‘images/ie-icon.svg’: Permission denied
chmod: cannot access ‘images/google-plus-icon.svg’: Permission denied
chmod: cannot access ‘images/mobile-ready-icon.svg’: Permission denied
chmod: cannot access ‘images/404.jpg’: Permission denied
[Code] ....
I have installed Nginx with PHP-FPM on Debian 8 to learn more about Linux permissions. Nginx is run as www-data user.
I have created a simple PHP script that outputs the date. I have set the permission as 000 (no permission at all) and it is root:root. How come I can still run this script in the browser without getting access denied? The script is inside a folder with world execution. When removing the world execution permission, the script can't be run. How does this all connect to each other?
I try to do SVN checkout,looks like I'm facing this issue.I can ssh using putty to this server(banana).But from machine to machine it show same error.
SVN checkout
zr@banana [104]$ svn co $SVNROOT/deployment/new_debian_install
Permission denied (publickey).
svn: To better debug SSH connection problems, remove the -q option from 'ssh' in the [tunnels] section of your Subversion configuration file.
svn: Network connection closed unexpectedly
================================
ssh machine to machine:
zr@banana [105]$ ssh apricot
Permission denied (publickey)
when i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
View 1 Replies View Relatedi have a notebook where i wont to install andorid SDK, I have a Debian 6, 64bit that work well.After install android sdk, i test installation but i have this
:~/android-sdk-linux_x86/tools$ ./emulator
./emulator: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory
i use comand ldd
:~/android-sdk-linux_x86/tools$ ldd ./emulator
[Code]...
I don't know if this is the right place to ask, but has anyone had any success in syncing and android phone to KDE PIM?I'm just looking for a new phone and was wondering if this would work. I'm mostly after being able to sync Kontact and the Calender.
View 9 Replies View Related