Recently, I'm getting an annoying problem: When I scroll quickly the text smears or duplicates itself -- doesn't happen with all applications. I haven't had this problem until I started to use OpenGL compositing with my NVidia card.
View 3 RepliesI have a text file which is a list of all my contacts. So far i have only found software and commands which remove duplicates but i would like to remove all duplicates AND their original entries too so only contacts which have no duplicates are left.
View 10 Replies View RelatedI need to view 10.858 text files by this friday to see which ones I need (searching file contents is not a solution), I was wondering if anyone knew any way/program to quickly view them as if they were, for example, images? And, optionally, to be able to save them to a different location from there? It doesn't necessarily have to be for Ubuntu as I also have WinXP and Vista, but it would save me having to transfer those couple of gigabytes to another computer.
View 3 Replies View RelatedText does not scroll properly in terminal windows or in any KDE4 application window including Yast's windows.
When I scroll up or down the text either rolls in the upper line or two in a window or the lower line or two and nothing rolls in the middle.
I want to scroll back 10000+ lines in text mode linux terminal. As there is an unlimit option in gnome-terminal, so I guess if this is also possible in text mode?
View 2 Replies View RelatedI really enjoyed using Apple's wireless Mighty Mouse and Magic mouse because of their ability to easily touch scroll 360 degrees. Unfortunately, Linux drivers are not provided for these mice.Is there an equivalent wireless mouse that works well in Linux? Ideally with native support or community provided drivers, etc.
View 2 Replies View RelatedThe new scroll tab that 11.04 has appears when you hover over the orange area on the scroll bar. The scrolling arrows are gone.Well this scrolling tab often vanishes before I can click on it to scroll down. Is there a way to revert to the old style, like the scrolling mechanism on these forums? It is nice to have the option of the arrows on top and bottom, along with the scroll tab thing.
View 3 Replies View RelatedAlthough having used Ubuntu for a good couple of years, I'm still a total beginner when it comes to scripting. However, what I need to do should be fairly straightforward:
Importing images from my digital camera, both RAW "originals" and JPG "copies" end up in the same folder. I typically flip through the JPG:s in Image Viewer and remove those that I'm not interested in. Now, this leaves me with the tedious job of going though all the RAW files in the folder manually to get rid of those too! It sure would be wonderful to get Ubuntu to do the work for me...
The script would simply need to go though all the RAW files in a folder one by one, check for a corresponding JPG file - and if there isn't one, remove the RAW file. How could I accomplish that?
I am hoping someone already has a script or knows of an app that will let me do this fairly easily - I have a fairly large folder structure that goes several levels deep, etc. In many cases there are duplicate file names that are not really different, e.g.,
/home/chris/folder/folder1/doc1.doc
/home/chris/folder/folder2/folder3/doc1.doc
I want to recursively go through /home/chris/folder and move everything to /home/chris/another_location/ without subfolders and renaming duplicates as appropriate, e.g.,
/home/chris/another_location/doc1.doc
/home/chris/another_location/doc1_1.doc
I have tried a combination of the following lines in .bashrc to try and control duplicates in the bash history file:
export HISTCONTROL=ignoreboth
export HISTCONTROL=erasedups
export HISTCONTROL=ignoredups
[code]....
I've tried using a script to run incremental backups. The idea was to use the update switch to just update the files in the .tar instead of creating new ones. However it seems to have created duplicate files in the tar instead of just updating them (refer to screenshot). Is this normal?
Here is the command in the script;
Code:
tar -uvpf /home/jonny/.BackUps/Updating/Documents.tar /home/jonny/Documents
Is there a way stop this but still have them update to the latest version?
Open office Calc all the googles i can read all have removing the duplicates from the spreadsheet. I want to do the exact opposite. I want to keep the dupes and remove the others.
View 1 Replies View RelatedI am running KDE 4.4.2 release '241'. I have no clue if that's the latest dev version, but I do know that each day I have to install a 150MB KDE update, so it probably is. Either way it's pretty annoying. The way opensuse handles repositories is different than Ubuntu's, so somehow I ended up creating duplicates too. So basically, I want to remove any duplicates and also stop receiving the daily KDE updates.You can ignore the google repositories. My repositories
[code]...
I have a large file and want to keep lines which are duplicates, but the test for duplicates is performed only on the first blank-delimited word.
View 6 Replies View Relatedi am getting duplicate entries in dag rpm repository with different names in different cases !
# yum search fileinfo
php-pecl-Fileinfo.x86_64 : Fileinfo is a PHP extension that wraps the libmagic library
php-pecl-fileinfo.x86_64 : PECL package to get file information through libmagic[code]....
which is the correct rpm to install ?
When I ping our Microsoft Windows terminal server "cluster" farm, I get ICMP warnings that there are duplicate packets. I am able to rdesktop to the cluster with no problems. We are trying to setup nagios to run on this Ubuntu configuration and nagios is reporting the following error:
"PING WARNING - DUPLICATES! Packet Loss=0%, RTA=.98ms.
FPing reports duplicates as well. Is there a setting in the Arp table that needs to be set differently because the "Cluster" MAC address isn't an actual hardware MAC but a virtual MAC address?
I found this email in my inbox. From time to time it's showing up here then Evolution starts downloading messages again and duplicates all my inbox. I think.
View 1 Replies View Relatedwhen i play a song in banshee, or a videos video, i get no sound at all. however, in banshee 1 3 minute song will appear to play in about 20 seconds (the progress bar speeds along), and videos videos play back in ultra-fast motion with no sound. weirdly, when i go to system settings -> multimedia, and click test on the default sound device, the kde login sound plays back fine. this worked when i first installed; does anyone know what's going on here? i think it may be a problem with gstreamer?
View 1 Replies View RelatedOver the past few weeks I've noticed that my laptop battery is dieing VERY fast. I have no idea what is causing this, and I haven't changed anything.
View 6 Replies View RelatedI'm running badblocks on some new disk drives just to be safe before my return period expires. I'm running the command
Code: sudo badblocks -b 4096 -p 4 -c 65536 -w -s /dev/sdb1 on an empty partition taking up the entire device. I am getting the following output:
[Code]...
1) When it gets to the "reading and comparing" phase, it seems to complete in <1s. I see other posts where people say this takes them as long as it took to write to the drive. I don't see any mention of this being quick, so I'm just afraid that badblocks is being denied read access or something.. Anyone familiar with this behaviour?
2) Obviously since it is on a sixth pass, badblocks thought that it found new bad blocks on the second pass (or later). When I check SMART, though, the drive has not re-allocated anything (despite having plenty of spares)... Doesn't this seem odd? Is there some reason why the disk would not step in upon a write fail? In fact, I thought a write fail should be transparent... Which makes me wonder if question 1 (above) is causing this...
Ubuntu 10.04 - when I logout I get screenful (at least) of messages all with the same format. They disappear too quickly to see what they're about. I've looked at the logs but can't see anything like what I see on the screen. Is there any way I can find them?
View 2 Replies View RelatedI bought a new Hp Pavillion DV6T. For the most part, everything worked right out of the box with ubuntu, but the computer seems to be heating up really quickly for no reason whatsoever even if I'm not doing anything intensive. Why this is happening. The fan always seems to be running at full blast. I logged onto windows for a minute to see if there was any difference in heating between the two OSs and windows seems to run much cooler and much more quiet. On a side note I'm thinking of returning the HP and buying a dell XPS 15. I hear they are more compatible with ubuntu and are better built.
HP Pavillion DV6t
ATI Radeon 6570 1 GB graphics card
Intel I7 2.0GHZ quad
I'm having issues setting up rsyslog to receive syslog from another server and only log to one file. I'm receiving the syslog from the remote side, however its putting the entries into more than one log file.
I configured /etc/rsyslog.conf to enable udp, and I have implemented a filter to log only from that IP address, and then stop processing more rules, but it seems to continue on.
I have found that the remote syslog events are using local0 and local1. There are two custom rsyslog config files in /etc/rsyslog.d that handle those two facilities. If I use that same if statement at the beginning of those custom config files, I can get it to work. Seems like a hack though.
Not working:
I put my if statement before the include statement, thinking I could stop it from hitting the custom rules.
Code:
Select all# /etc/rsyslog.conf Configuration file for rsyslog v3.
#
# For more information see
# /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html
#################
#### MODULES ####
#################
$ModLoad imuxsock # provides support for local system logging
$ModLoad imklog # provides kernel logging support (previously done by rklogd)
#$ModLoad immark # provides --MARK-- message capability
[Code] ....
This works:
A custom config file in /etc/rsyslog.d
Code: Select allif $fromhost-ip == '<my ip>' then /var/log/<my directory>/syslog.log
& ~
local0.* /var/log/<a log file for local0>.log
This is on a WD Mycloud device:
Code: Select allLinux WDMyCloud 3.2.26 #1 SMP Tue Jun 17 15:53:22 PDT 2014 wd-2.2-rel armv7l
The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.
I'm trying to use awk to remove rows that are duplicates based on 3 fields, and I want to keep the on that has the higher value in another field. I'm working in C-Shell. For example the below is greped out of a larger data set to use in here as example:
Input (Field separator is a comma:
Code:
4180,-6999,MA,BARNSTABLE,BOURNE,1,1.7,1700,PM,1/26
4180,-6999,MA,BARNSTABLE,BOURNE,1,3.5,2025,PM,1/26
4180,-6999,MA,BARNSTABLE,BOURNE,1,1.0,1511,PM,1/26
4180,-6999,MA,BARNSTABLE,BOURNE,1,5.7,0540,AM,1/27
[Cpde]....
when i ping a remote machine to 172.16.1.55 then i get this result...how can get normal packets......
64 bytes from 172.16.1.55: icmp_seq=1 ttl=128 time=0.468 ms (DUP!)
64 bytes from 172.16.1.55: icmp_seq=2 ttl=128 time=0.448 ms
64 bytes from 172.16.1.55: icmp_seq=2 ttl=128 time=0.469 ms (DUP!)
[code]....
I'm trying to trim down Linux so that it fits on an appliance, and noticed that some related files in /bin have the exact same size:
Code:
Are those file duplicates, or are they just hard-linked, ie. there's really only one file in the flash memory but it looks like there are more than one? How can make sure?
I have about 1TB of data to sort out and need a good GUI package to find and safely delete the duplicate files. I am running Ubuntu 10.04 amd_64. Would appriciate any thoughts on how to get it done.
View 8 Replies View RelatedI have a list of about 425 servers that are mostly redundant. I need to weed out the duplicate names so that I have a count of only the unique server hostnames. What is a good command to do this?
View 3 Replies View RelatedI have a column of datetime entries which I sorted to removed duplicate entries.
I have still lots of entries which are adjacent to each other by 1 second.
How would I go about removing any entries which have an offset of the previous or after entry by 1 second?
Code:
We have quite a few SEO clients who require multiple IPs which are all from different class c allocations. (10 - 50 IPs) used for projects lasting weeks to months at a time. Since we don't have connected IPs in ranges we can't use the range scripts but I don't know of a way to easily add a long list of individual IPs. These are CentOS servers, by the way
View 2 Replies View Related