I used Ubuntu Tweak on ubuntu 10.10 and i don't remember what stupid thing i did. Now, my ubuntu never logs on, neither in recovery mode. I have attached the Camera Screenshot of the error screen. And i am a beginner, and it feels bad when my ubuntu doesn't work.
View 6 RepliesI just tried ubuntu 9.10 in recovery mode i came to know that i can change root passwd without knowing the password then i can change password of every user by logging in as root
View 2 Replies View RelatedI installed lucid last week, and this morning installed some updates that appeared in update manager and then started having issues with permissions so I rebooted. Now when I try and log in I get the message Authentication Error Normally this wouldn't be a problem I would reboot again hit ESC just before loading Grub appeared and go into recovery mode and change the password for my master user. But I never get the chance to press ESC, and even I hold the key down from the time my BIOS flash screen is up, I never get the GRUB menu.
View 1 Replies View RelatedI installed ubuntu 10.04 by wubi. It works perfect until I installed and ran "startupmanager". I find that I can't enter ubuntu, even in recovery mode. The screen keeps showing "rstslog main process ended, respawning [fail]" and other text
View 4 Replies View RelatedI broke sudo when I wrongly edited a file in /etc/sudoers.d in vi(did not use visudo :-().I read that I could fix the same by rebooting into the 'Recovery Mode' by selecting the same from the grub menu.
However I'd earlier disabled the showing of the grub menu by editing /etc/default/grub. As a result I can't seem to go into recovery mode to fix my broken sudo.
I've got a, as it seems to me, strange problem.I've inadvertently deleted my user from the group admin so I'm in the same situation of a lot of other users (read a lot of messages about it).My problem is that when restarted in recovery mode there is no way I can choose the 'drop to the root shell' or similar in the menu.The menu appears for a second and then I've got an empty screen. If I press a key I've been requested for a username and password that of course is not what I need.
View 2 Replies View RelatedI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedI accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies View RelatedI installed Centos 5.4 on my Pentium E5300 new comp, but I need IPX support in my work. It's simple - ipxutils and ncpfs from Fedora Core and new kernel with ipx support. I copied kernel config from /boot folder and activate ipx, ntfs support, and choose processor core 2 duo. New kernel (2.6.26) works OK, but I got one problem - when start it still shows message: "kernel: HUB 1.0:1.0 unable to enumerate USB device on port 1 (or 2, 3)" and stops after logging (text mode)
I got 2 USB devices connected - printer HP D5160 PhotoSmart and Scanner A3 USB Mustek, and I know scanner cause that messages but I don't understand why. Kernel config is the same like that from distro kernel (almost - ipx, ntfs and proc), but distro kernel doesn't do that. So I got 2 questions:
1. Why
2. What to do to stop that (disconnecting devices on boot time is not a solution)
How do I get int recovery mode in Ubuntu 10.04?
View 2 Replies View Relatedok so i have been haviung the same problem for a while now and it is starting to **** me off, with every distribution of ubuntu i am getting thuis stupid message when i log in it is ionoly every once i a while that i get it but saince i have upgraded to 220.04 cannot fix it. i could fix it befor pretty easily, the probklem is when i get t o the login screen i get this generic login menu whne i attept to login i get this message somethiung like power management is not installed correctly. like i said b4 it was easy to fix, all i would do is to go to the ubuntu recovery thing, which is apparently not available ion 10.04 it does not evn give me a choice which to boot how do i get to recover mode in ubuntu 10.04?
View 2 Replies View Relatedrecovering a partial upgrade to Lucid.
4 core Xeon , was running 64 bit 9.10.
Upgrading over the weekend, but it failed, and suggested running dpkg-reconfigure -a
I couldn't launch any terminal/xterm windows, and couldn't login via ssh (kicked me out with xmalloc failure) or through a virtual console (showed garbled characters)
So I had to reboot.
Now the boot process -- I've tried recovery mode for all othe kernels I've got installed, but all fail in the same way:
Code:
Begin: Starting AppArmor profiles...
bash: xmalloc: ../bash/locale.c:73: cannot allotate 225469542417 bytes (0 bytes allocated)
Failure: AppArmor profiles failed to load.
[Code]....
It looks like it might be a libc problem. At any rate, I'd like to get into a recovery console to restart the update.
I run 9.10 from a live usb with persistece, and got /etc/sudoers awfully messed up. now i'm told to fix in through 'recovery mode', but i don't think live usb has one. is that true? what about my sudoers? is there another way to fix it?
View 3 Replies View RelatedAfraid I'm an utter newbie. I'm using 10.04 64 bit. I only noticed this after I tried to install the NVIDIA driver and all my ubuntu os'es blackscreened after restart. Because I couldn't even access recovery mode, I ended up reinstalling ubuntu, overwriting the old root.I thought the problem was due to the driver, but it's even now persisting. I can run the terminal (within X?) but if I try ctl alt <F1-6>, the screen just freezes until I do ctl alt F7. Furthermore, recovery mode still leaves a black screen after the initial loading text. I need it to work before I attempt reinstalling the NVIDIA drivers again, as I don't want to reinstall the OS and all the programs.
Sometimes it feels like I can do stuff in recovery mode, like Ctl Alt Delete or sudo shutdown, but sometimes not. Not sure if this is related, but grub also lists windows vista and windows recovery as the opposite they should be (I thought my windows was completely screwed until I tried windows recovery).
I have a HP mini 2133 with Ubuntu 10.04 NBR installed, but because the CMOS battery went flat and the date on the BIOS got reset to 1980, I now get a failure starting the machine (Superblock failure: Last mount time is in the future). I've already googled on this error, and the general advise seems to be "run fschk and let it complete", but my question is...I don't get a grub screen come up when Ubuntu boots, and Contrl/Alt/F* doesn't bring me to any login windows. So how do I interrupt the startup, and get to a login window before I get the mount error.
View 1 Replies View RelatedI messed up my video drivers and now can't get into recovery mode. Pressing the shift key isn't working. All that happens is the splash screen appears in faded looking colors and then fades to white.
I've got an ASUS N61 laptop with an ATI Radeon 5730 graphics card. I just upgraded to 10.10 from 10.4 and was trying to install the open source video drivers. I must have messed something up and can't get to the terminal now.
I'm having a huge problem right now and I could use some help deciphering what's wrong.I can't get my system to boot (see signature) and even the recovery mode is buggered. henever I try to boot, all I get is a flashing underscore. This is the same for both the normal and recovery modes Kernels. I've run the boot info script from a live cd and I've attached it to this post.
View 9 Replies View RelatedUbuntu cannot boot. says Starting system V runlevel compatibility [fail]it is after replacing xorg.I want to enter in recovery mode. But when i try escape it just enters bios. if i try holding shift it just does nothing.So how to enter recovery mode in ubuntu 11.04 i just cannot get to grub menu.
View 3 Replies View RelatedThis is an urgent problem. I removed my propreitary ati display drivers because I had to update them but I don't know what happened. Now I can't boot. The screen shows the Ubuntu splash screen but then the login screen does not come on. I get a blank screen. Worst of all, I had removed Recovery entries from the grub so I can't boot into recovery mode so easily. It's urgent. I don't want to reinstall with my exams a week away.
View 2 Replies View Relatedin Ubuntu 10.04 I would like to enter in recovery mode, so I restarted computer and pressed <Esc> key just like in any previous version, but nothing happens Ubuntu still starts to boot.
How to enter into recovery mode in the latest version of Ubuntu?
I'm running 9.04 on a Powerbook G4 and, long story short, I accidentially put it into hibernate mode. When I try to turn it on, I am greeted with a blank screen after the bootloader. Unfortunately I can find no way to get out of this, since I'm using yaboot instead of grub. I can access my yaboot.conf file if I mount the HD from a live CD, but is there something I can put in there to tell it not to try to resume from hibernation? Or would deleting the swap partition at hda4 that apparently contains my hibernation data solve the problem?
View 8 Replies View RelatedI decided to install ubuntu on my family desktop because it is quite old now and it needs constant maintenance for windows. I have used the old ubuntu on this computer some time ago i believe it was the 8.04 version. But anyway back to the point, i have decided to put ubuntu back onto the computer but i have encountered an issue. The issue is that when i installed ubuntu everything seemed to be working perfectly out of the box the printer, wireless etc... but when i installed the restricted drivers for the ati card inside.Upon loading ubuntu a big OUT OF RANGE came up on the monitor and i cannot access anything. I looked at the FAQ but am unable to get into recovery mode to type in the relevant command prompt and there seems to be no grub popping up to press esc/shift to get into the menu. Is there anyway around this? i am prepared to reinstall ubuntu but what could i do to prevent this upon re installation?.
View 4 Replies View RelatedI have made an entry in fstab that is keeping me from booting. I am able to get into recovery either from entering "M" as it is trying to mount my bad entry or from Grub.
However once in recovery I am unable to save my edits in vi. I have tried several attempts at saving my edits to no avail. What trick will I have to impose in order to clean up my fstab so I can boot successfully.
as Ubuntu is my only OS on this box.I had this PC running as a server for a few months with few reboots.I installed updates as usual yesterday, and hadn't changed anything configuration-wise since the last reboot. Well last night this server that I was running was moved to another Windows box and so I finally got to shut this PC down for the night. In the morning, I was greeted with an endless splash screen. It went on for 20 minutes without anything. I did update the kernel through update manager.
So what do I do? This machine has a 1TB HDD with a lot of very important data on it--reformatting is not a considerable option at this point. Which is bad because I don't know what else I could so when even recovery mode isn't working...
I installed Ubuntu 10.04 32 bit on an Acer Aspire 7520 laptop running Vista.Thereafter, Vista could only be run via the "Windows Recovery Environment" grub menu option, which is on /dev/sda2. However, within Vista than the wireless network is not functioning any more. It has given lot of headaches to find a way out. Unsuccessful, so far.
View 9 Replies View RelatedI had many problems with installing kubuntu 11.04 on my laptop HP Elitebook 8560p and after downloading different iso everything works well, but sistem freezeout and would not reboot also in recovery mode that would load untill Recovery menu when system won't responde.
View 3 Replies View RelatedAfter upgrading to 9.10 Karmic Koala, my Amilo Laptop (AMD64) refuses to boot. I installed GRUB2 which works fine for my WinXP ... and Karmic will boot in recovery mode.
When trying a normal boot, I get a black screen. CRTL-ALT-F1 yields just a blinking cursor. The system will immediately reboot when pressing CRTL-ALT-Entf.
When booting in recovery mode, I choose "Resume normal boot" from the menu, log in while in cosole mode and enter "startx" ... and the grafic environtment works fine!
Why does the system work in recovery mode, but does not start with a normal boot?
Fly.By.Wire
Here's some information on my system:
cat /proc/version
Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009
lshw
mistral
description: Notebook
product: Amilo A3667G Series
vendor: FUJITSU SIEMENS
[Code]....
Today I wanted to make a backup of my Ubuntu server. Since the program wasn't working for me, I rebooted my computer and right now it wont boot. Now I entered recovery mode and I'm trying to recover my /var/www and /etc/mrtg folders. I want to copy them to my USB-Stick but Ubuntu wont do this.
The command I tried: Code: cp -r /var/www /dev/sdg1/www I already created the folder via a other system. I also tried to mount the USB stick: Code: mount /dev/sdg1 /mnt/usbe But im getting the following error: error while loading shared libraries: /lib/libsepol.so.1: Invalid ELF header.
A few days ago I began to get messages about my hard drive running out of space, and while I tried to clear out some files to make room I somehow managed to mess something up such that my main login screen appeared with hugely distorted letters and dialog boxes, and it wouldn't let me log in. While this is still the case, I can now log in by booting to recovery mode, selecting the netroot option, doing an "su myusername", and then executing "startx".
While this is a little inconvenient, it does bring up my standard Ubuntu operating environment and I now have access to all my files, email, internet, etc. There are still a few miscellaneous things that are messed up, however, and I don't yet know how to fix themIn particular:a) I can't print. I tried running the printer configuration tool from the System->Administration menu, but there's no "New Printer" icon. Alsowhile trying to get it working, I managed to generate a "The cups scheduler is not running" error message.b) I can't mount a USB drive. Every time I plug one in, I get an error message that says "Unable to mount drive, not authorized."c) Finally, there's the basic problem of still not being able to login without going thru my recovery mode workaround.I suspect all these problems are related, though I'd be happy to fix them one at a time if that's what it takes.
I recently installed Ubuntu and noticed when I load 'Recovery Mode' from Grub, I am not asked for a password. Since you can change the login password from there, is there a way to add a password to this?
I would like to be prompted for a password before the recovery mode starts.