I have a problem with phpmyadmin. I use Ubuntu 10.04. I have already installed Apache, MySQL, and PHP. They are working properly. Finally I install phpmyadmin. Installation is successful by using command'apt-get install phpmyadmin'. I can't understand how to access phpmyadmin from browser. I type the URL "http://localhost/phpmyadmin/". Browser show me file not found.
View 2 RepliesI have a problem with phpmyadmin. I use Ubuntu 10.04. I have already installed Apache, MySQL, and PHP. They are working properly. Finally I install phpmyadmin. Installation is successful by using command'apt-get install phpmyadmin'.I can't understand how to access phpmyadmin from browser. I type the URL... Browser show me file not found.
View 1 Replies View RelatedI have apache2, sql, php all installed fine on my debian installation. Initially, I installed phpmyadmin via apt-get install phpmyadmin. However, I wanted to upgrade my version of phpMyAdmin to the latest, so uninstalled and deleted it and used subversion to get a later version of phpMyAdmin. I decompressed the file in etc/ and renamed it to phpmyadmin. So now my working copy is located in /etc/phpmyadmin.
The issue: I cannot get phpmyadmin to show up in my web browser in http://MYIP/phpmyadmin. I used echo Include /etc/phpmyadmin/apache.conf to get the line in /etc/apache2/apache2.conf, issue is, there IS no apache.conf in the phpmyadmin directory. If I recall correctly, installing phpmyadmin from the debian package has you choose a server before finishing the installation. I obviously did NOT get this prompt as I am installing from source.
Questions: How do I set the server? Is this why /etc/phpmyadmin/apache.conf is missing? Additionally: I have searched for hours for a solution and found nothing. I tried the phpmyadmin manual installation where you create a conf folder and set the permissions but in the end I could NOT access /phpmyadmin/scripts/setup.php
I have been trying to set up phpmyadmin for a while now, but I just cant seem to access it with the browser.
I yum installed phpmyadmin. In my /etc/httpd/conf.d/phpMyAdmin.conf I have:
When I visit [ip]/phpmyadmin I just get a 404
I've reloaded apache, checked the phpmyadmin config file, and everything seems fine, I just get constant 404.
i have fedora 11 installed in my laptop and apache server by default. after starting httpd and mysqld services i was able to access localhost through browser.(e.g. [URL]). before installing phpMyAdmin everything goes right. after installing phpMyAdmin it created problem in localhost. now typing [URL] it opens joomla site but without images and without intending of content. when i type [URL] in browser it ask for user name and password. i already provide user name(root) and password(my_root_password) in /etc/phpMyAdmin/config.inc.php. but it doesnt open.
View 1 Replies View RelatedWhich is the default file browser(NOT web browser) of Ubuntu 10.10 Maverick Meerkat?Nautilus?Are there any others for Ubuntu?
View 7 Replies View Relatedi just updated from karmic 9.10 to lucid 10.04 using the online upgrade option. so far everything is working great. the only issues i am having seem to involve firefox. when i visit videos i get the message "your browser is no longer supported. please upgrade to a modern browser." i am running 3.6 "canonical" so it is "modern". i am able to watch videos after i close the message. it's just an annoyance to get this message every time i view a video.
next, is on some websites (like this one) it will not supply my login info. but on a few sites (like ebay) it does supply my login info. not sure why some sites work while others don't. the info is there when i look under my saved passwords....
I'm trying to log into phpMyAdmin, but when I go to the page, I type in my username and password, click Go, and then the page refreshes with no error message
View 6 Replies View RelatedI have XAMPP on my local pc runnung ubuntu that i use it for testing purposes...During the initial XAMPP Security configuration the password i put for the phpmyadmin was the same as my main Ubuntu password so i wanted to change into something different.. (I had to share phpmyadmin with others so i didn't wanted to reveal my Ubuntu password)I changed the password but now i can't log into PHP my admin!is there any way i can reset the password or add another root user with all DB privileges?Here is what I did (I am writing this only by remembrance cause now i can't access phpmyadmin :S ):1. Clicked on the Privileges tab2. Selected the root user3. Changed the password *4. After several unsuccessful attempts to change the root password i repeat the same steps above and additionally I checked the field that said something like: "Delete the user and create a new one with the new password"
View 4 Replies View RelatedThrough synaptic i installed phpmyadmin, apache2 and php5.
of course during the installation i got an error about some database linking or what not.
of course.
naturally.
anyway, apache seems to be working when i point to 127.0.1.1
now how do i get to the phpmyadmin page from here? as in, whats the most common method?
I installed phpmyadmin using synaptic manager (selected apache2 as server option ) and then i opened localhost /phpmyadmin .It gives the following error :phpMyAdmin - Error
Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly.I have apache,php and mysql already installed and I am using them with default configuration . There are many files in /var/log/apache2 and i am not not able to figure out anything
wondered why I never noticed but for a while now the phpmyadmin folder seems to be missing from the www folder.It still works in local host, but I'm a bit perplexed as to where it has gone.
View 2 Replies View RelatedI'm surfing along just fine when I select some link in my browser.The status line reports "... waiting for ..." and the browser seems to stall for a long time (minutes). Often, but not every time, I can select the STOP toolbar icon and reload the page. This time things work normally.
I have a similar but different malfunction running Evolution email connected to my hosted IMAP server. I select a message and see "... formatting ..." and then Evolution seems to stall for a long time (minutes). Rarely the stop-reload actions help reading email. Instead,all Evolution windows go dark grey and the entire desktop stalls.[Analysis -- It has the feel of a "network" issue provoking issues within Evolution itself rather than an Evolution-only malfunction.]
Watching the running system with 'htop' and similar, I do not see where some other application or service is sucking all of the available CPU time or such. [Analysis -- It has the feel that either the browser message or the email message were sent into limbo without reaching their intended destination. Stop-reload sends the bits to the right places and so I get results.]
I have a typical lamp setup. I updated to 10.04 and I can't seem to access phpmyadmin now. Apache and mysql seem to be working fine. I have tried restarting them both and have reinstalled phpmyadmin. When I say not working, I mean I try to navigate to [URL] and get page not found.
View 5 Replies View RelatedI had the brilliant idea to make my own web server since i had a silicon mechanics 1u server collecting dust. Ive got apache running. Phpmyadmin is installed but i cant get into the admin panel. When it asks for the user name and password no matter what i use it wont let me log in.
View 2 Replies View RelatedI switched to Linux recently to start learning PHP and MySQL, and used this video on ..... to learn how to install all the desired packages and stuff[URL]... Everything got installed correctly up until 6:48, at the time I didn't know that you need to press space bar to get the star in the box to select the desired configuration, thusly causing myPhpAdmin not to be installed correctly and localhost/myphpadmin not showing up.
So after trying to reinstall it, and then removing all the packages and re installing, this specific set up for the db-config will not show up. Is there a way to completely remove all of these packages and start fresh?
I also tried installing the LAMP server thing, but also myphpadmin fails to get installed properly.
I recently installed LAMP using this handy guide:Everything seams to work except phpMyadminI'm supposed to type http://localhost/phpMyAdmin/ to use it but I get a 404 error "The requested URL /phpMyAdmin/ was not found on this server."
View 7 Replies View RelatedI have followed instructions here to install apache + php5 + mysql
[URL]
Apache 2 server is working. phpinfo.php shows php working. I've previously installed phpmyadmin .. but this time I've made some error in installing phpmyadmin. I would like to start afresh .. remove and reinstall. I looked in Synaptic Package Manager and phpmyadmin had a green marker .. showing installed. I tried "Mark for complete removal" But I can't purge phpmyadmin installation to try again. See screenshot.
Every time I try to access localhost/phpmyadmin or localhost/phpmyadmin/index.php I get a 404 - Not Found. But, http://localhost/testphp.php works OK. I had Apache installed in the past but removed it and recently installed Lighttpd. I'm using Lubuntu 10.10 a flavor of Ubuntu and using my laptop (localhost)as a testbed to learn. I have tried restarting Lighttpd after each change to the conf file. Here is my lighttpd.conf.
# Debian lighttpd configuration file
#
############ Options you really have to take care of ####################
## modules to load
[Code].....
I am having an issue with phpMyAdmin on my Xubuntu machine. I installed a few updates today and now my phpMyAdmin web interface site is not loading on the server. This is a local server running in my office. It appears that the page tries to load, but no output is delivered to the screen.
Taking a closer look at my updates, it looks like the following changes were made (along with some upgrades to Firefox):
When I use the 'Force Version....' command, I am given only two options the '4.8' version that I have now (the broken one) and a flat '4' version with no .7. Also, the force version didn't seem to do anything. I tried to Force a version and then mark a package for reinstall. When I did this Synaptic informed me that it was simply going to reinstall the 4.8 version.
What I would like to do is to revert to the 5.3.2-1ubuntu4.7 version of all of these files and then lock the version using Synaptic, to prevent this issue from recurring.
I am not afraid of heading to the command line either.
System Information:
32-Bit Xubuntu 10.04 LTS install
Athlon 3800+
2GB Ram
I've just reinstalled XAMPP in my machine. Now, I can't get phpmyadmin to work. Before this was okay. But since I lost its password I need to reinstall it again. Now I got it reinstalled, another problem occured. When I enter localhost/phpmyadmin in my browser, it tells me to open the file with a program which is obviously something must be wrong during the installation or the system is screwed. Here's the screenshot:
Another problem is I can't get Apache and MySQL to run using the XAMPP wizard. But by using shell I can get it worked, but when I see the wizard, it just says stopped. What's wrong? Although I have pressed Execute it still can't be run.
From terminal:
Code:
me@me-laptop:~$ sudo /opt/lampp/lampp start
[sudo] password for me:
Starting XAMPP for Linux 1.7.4...
XAMPP: Another web server daemon is already running.
XAMPP: Another MySQL daemon is already running.
XAMPP: XAMPP-ProFTPD is already running.
XAMPP for Linux started.
I can view a php page only with links browser (a text browser) But when i use firefox i got an error "Content encoding error"
View 4 Replies View RelatedHave basic LAMP setup on 9.10 box. I want to have a publicly accessible website AND I want to have phpmyadmin available. The only thing is I would rather not have the phpmyadmin interface available on the internet. I usually open a ssh port forwarded tunnel when I need to use phpmyadmin on this server. I want to add a directive to make phpmyadmin bind only on localhost. I have found the phpmyadmin config file in /etc/apache2/conf.d
phpmyadmin.conf -> ../../phpmyadmin/apache.conf
I have tried adding some LISTEN directives, but apache does not like my directives-- I am obviously not doing it right. I have looked for a bit on the internet and can't find out how to disable external access to a configured site in Apache.
After upgrading firefox with the upgrade manager I can't run phpmyadmin on my local computer with firefox. phpmyadmin works with Epiphany, just not firefox, however phpmyadmin works if I log into the server where my websites are located, so whatever the problem is it's on my local computer.I get this error after logging in
phpMyAdmin - Error
Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly. The only error logs I've been able to find are MySql and Apache
Here's what they say.Apache <b>Warning</b>: Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in <b>Unknown</b> on line <b>0</b><br /> <br /> <b>Warning</b>: Directive 'magic_quotes_gpc' is deprecated in PHP 5.3 and greater in <b>Unknown</b> on line <b>0</b><br /> [Wed Jun 30 07:48:32 2010] [notice] caught SIGTERM, shutting down
[Code]...
i edit this file... Code: /etc/network/interfaces now it looks like that
Code: auto eth0 iface eth0 inet dhcp after the change I cant enter to local host with the browser and unable to log to PHPMYADMIN what i need to change to solve it?
I am trying to install mcrypt for use in phpMyAdmin but am having some trouble. I apt-get'd the mcrypt-php5 package and it installed, but it seems to only function on the Apache Module version of php5 and not the CGI version. Both versions show the mcrypt extension installed in phpinfo, but in phpMyAdmin only one of them removes the error about mcrypt. Other extensions (such as cURL) which I installed with apt-get have worked, so I'm not sure why this one does not.
EDIT: I also compared the CGI php.ini and the apache2 php.ini and there were no differences there. I also confirmed that the php.ini file for the CGI version is loading from that location.
Windows XP Pro, VMware and Kubuntu as the guest. Tried several different ways of adding LAMP server, via the Konsole and also via Synatpic and although I can get into localhost and it says "it works" doesn't actually take me to a list which includes the links to Apache and phpmyadmin like some tuts show. Also if I make the php test page that also works, but I cannot get phpmyadmin to work. When I look in the var/www folder there are only 3 files there and not the apache2 and phpmyadmin folders as shown on a lullabot tutorial.
View 9 Replies View RelatedIve done something, Im not sure what...... I was trying to backup my mysql DB so I can reformat that server and install different server OS, then reinstall mysql and restore the DB... Well, somewhere in this mess I did something and now I get DBI connect failed : Access denied for user ''@'localhost' to database 'mysql'CONSTANTLY! I cant see any of my SQL DB's anymore... I just need to get the privileges back that Im missing, back up these DB's and get on with this already!
View 5 Replies View RelatedMy situation I recently installed Ubuntu 10.04 LTS Server on a virtual machine. I installed apache2, php and mysql-server. Several vhosts I sat up are running fine and I can also connect to the MySQL server using the mysql command-line client. I now want to setup PhpMyAdmin to allow the vhosts owners to administrate their DBs. I installed the package using:
Code:
apt-get install phpmyadmin I answered the questions and accepted the creation of the phpmyadmin database. The install finished successfully. I did a small modification to the main website vhost to access it easily:
Code:
Alias /phpmyadmin /usr/share/phpmyadmin
[Code]...
I am able to access phpmyadmin via my web browser using either my local ip followed by /phpmyadmin and by using the same layout with localhost. If i use my DNS name provided by no-ip which i bound to in apache2 i am able to get to the "It works!" page with the domain name but if i use /phpmyadmin after it, it will tell me that there is no such directory.
View 1 Replies View Related