I've been happily using jaunty until yesterday. After reinstalling kubuntu to natty everything works fine except leafpad:
nick@rilmir:~$ sudo leafpad
[sudo] password for nick:
nick@rilmir:~$ leafpad
Segmentation fault
nick@rilmir:~$
So, when I run it as root, it works, but when I run it as ordinary user, it segfaults.Where do I even start looking?
i have made a shortcut on my desktop with ls command.how do i make the shortcut open with leafpad? with right click i can se it is set to executable file, and only when i click open with i can see leafpad
View 7 Replies View RelatedEvery once in a while (at least once a day; my computer is on 24/7) nautilus segfaults for no particular reason. Relevant lines from kern.log:
Code:
[1025306.206524] nautilus[4932]: segfault at 14 ip 00007f21e272f681 sp 00007fff15d60020 error 4 in libgtk-x11-2.0.so.0.2200.0[7f21e266c000+412000]
[1036388.690123] nautilus[22488]: segfault at 14 ip 00007fdfac3f5bcf sp 00007ffffc3d0220 error 4 in libgtk-x11-2.0.so.0.2200.0[7fdfac336000+412000]
[1277941.447685] nautilus[6944]: segfault at 14 ip 00007f01c578b681 sp 00007fffb95aed40 error 4 in libgtk-x11-2.0.so.0.2200.0[7f01c56c8000+412000]
[Code]...
When running leafpad as root, it saves its options, but when running it as regular user, it doesn't. Why? I have to configure it every time I close leafpad and start again.
View 2 Replies View RelatedI'm working with some basic stack overflows. The following code compiles & runs fine in a non-ubuntu VM that's has no security features installed. On Ubuntu 10.04 it segfaults every time. I'm compiling on Ubuntu with the gcc -fno-stack-protector flag. If someone could point me to the security feature that's causing the segfaults (and how to disable it),
[Code]...
I have been looking for a while and I am unable to find an answer to yum segfaulting.
I have tried:
yum clean all
rm -f /var/lib/rpm/__*
rpm --rebuilddb
I tried upgrading yum and rpm to the newest versions in 5.5 and I still run into the same problem.
fcntl64(6, F_SETLK64, {type=F_RDLCK, whence=SEEK_SET, start=1073741824, len=1}, 0xbfcaf694) = 0
fcntl64(6, F_SETLK64, {type=F_RDLCK, whence=SEEK_SET, start=1073741826, len=510}, 0xbfcaf694) = 0
fcntl64(6, F_SETLK64, {type=F_UNLCK, whence=SEEK_SET, start=1073741824, len=1}, 0xbfcaf694) = 0
access("/var/cache/yum/base/primary.xml.gz.sqlite-journal", F_OK) = -1 ENOENT (No such file or directory)
fstat64(6, {st_mode=S_IFREG|0644, st_size=20480, ...}) = 0
[Code]...
An old machine in our office, running Ubuntu 6.06 all of a sudden will not boot up. I get the following info during boot:
Uncompressing Linux... Ok Booting the kernel
mount: Mounting /root/sda1 /root failed: No such device
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
[code]....
I haven't changed anything on the system as far as I'm aware, and I ran some HD diagnostics and everything seems fine. however when I try to mount the drive with the following command:
sudo mount -t ext3 -o rw /dev/hda1 /mnt
I get the following error:
mount: wrong fs type, bad option, bad
superblock on /dev/sda1, missing code
page or helper program, or other error
In some cases useful info is found in
syslog - try dmesg | tail or so
I ran fdisk -l and it says the partition type is Linux. The output after running dmesg | tail :
[12207.483801] init_special_inode: bogus i_mode (101)
[12207.483809] EXT2-fs: corrupt root inode, run e2fsck
[12260.427078] init_special_inode: bogus i_mode (101)
[code]...
Update: After running e2fsck -p /dev/sda1, I get the following info:
/dev/sda1: clean, 142449 / 9584640 files, 5402711 / 19161520 blocks
I no longer have access to my root desktop. On a session I attempted to change the root username but i apparently assigned it a wrong directory that does not exist. When I rebooted with my new root username, i was instead recognised as a simple user (no root privileges). I tried the console to change to "old" root but root password is not accepted and there is no way to access to sudoer files. it seems that inserting a new username requires root privileges and i am back to square one. Simply logging with old root username and password after restart gives me a blank screen with nothing on it and cannot even reboot.
View 9 Replies View Relatedwant to run VirtualBox with root permissions. Trouble is that only when run as root i can access attached USB devices inside of a virtual machine, otherwise, these a greyed out).Now running VirtualBox as a root user also changes the configuration folders, making all my virtual machines already defined disappear. I also don't want to copy all to the root configuration folders. Is there a way to give the VirtualBox root permissions but without actually running the application as a root user. Is it possible to do without changing the permissions of the non-root user, i.e. i don't want my user to have all root permissions, due to security considerations.
View 1 Replies View Relatedcan't cd to root acount /home in terminal - sudo cd /root fails?
View 3 Replies View Relatedi used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
View 1 Replies View RelatedSo I transfered a few folders with videos in them to the public folder on an Ubuntu 10.04 laptop I have from my Ubuntu 10.04 64bit laptop. When I wanted to delete the folder I didn't have permission so I ran "gksudo nautilus" so I could delete it as root. So I deleted the folder but I did not get the space back!
I went to /.local/Shared/Trash and one of the folders I deleted was there but deleting it didn't get that space back either.
I did some searching but most of what I find doesn't help or tells me to look in the folder /.local/Shared/Trash folder but that didn't help any.
I have a bit of a dilemma.
I'm using XFCE and it doesn't by default lock the screen before hibernating. I see this as a bit of a security risk, and as I can't hibernate while the screen is locked, I'm a bit lost as to how to achieve this.
I've begun editing /etc/acpi/hibernate.sh, here's what I have so far code...
If I run with sudo, the system hibernates, but gnome-screensaver will not fire. I can verify this by trying "sudo gnome-screensaver-command --lock". The screen goes black, but is not locked. The screen locks properly without sudo.
So the only solution I can see is to edit /etc/acpi/hibernate.sh in such a way that gnome-screensaver-command runs under the current user, and pm-hibernate is called as root.
Also, when I click the HIBERNATE button in XFCE, how does it call pm-hibernate under root without prompting me for a password? I normally wouldn't be interested in such things, but as it seems relevant to my problem I'm a little more eager to learn
A friend of mine has told me to set a root password and use root (f.e. switching to su in terminal and work with root rights instead).Is there any way to unset the root password? I know how to use sudo now.
View 9 Replies View Relatedhow do i switch from root (#) to normal non-root prompt($). I'm new to linux
View 3 Replies View RelatedI was using the latest stable release of Debian, dual-booted alongside Windows Vista, with the GNOME desktop, installed via netinst, trying to build and install a library that I knew and trusted, when suddenly I couldn't open the Root Terminal. I clicked the link (in Applications->Accessories (I think, whatever the top one is)->Root Terminal), and in the taskbar I saw an item that said "Starting Root Terminal". A few seconds later, that went away, but the terminal still wasn't open. I tried the regular user terminal, to see the same thing happen. Unsure of what was happening, I tried restarting my computer, since that's always the first step you should take in computer problems.
When I restarted, GNOME wouldn't start. The screen would flash a bit for a few seconds, then a dialog box would appear over a background of static that said "The greeter application is crashing. Attempting another one...".t would then go back to the DOS-style kernel, wait a second, and then the same thing would happen. After several of that, I would get a blue screen which said something to the effect of "It has been detected that the desktop environment has crashed six times in the past 30 seconds.
Waiting two minutes before trying again." When it did that, I tried logging in as root to assess the problem. I gave it the correct password, but it said that it was an incorrect login. After several tries (to ensure I didn't mistype the password), I logged in as myself. Same problem. I tried the su command, with the correct password, and it said it couldn't authorise it.
After a lengthy conversation with a friend of mine who was very good with computers, he basically summarised that he had no clue, but that his best guess would be a virus. Upon running the Linux installer, I found the Repair option. Not being particularly familiar with Linux, I used it simply to backup my important files onto a flash drive. I then tried running the Install option, in an attempt to simply write over my existing Linux and make it new again. The installer, however, consistently froze up when trying to start the partitioner, on the "Checking disks..." stage. I figured it was a problem with my partition. In my naivete, I simply used the Windows tools to clear that partition... It destroyed GRUB too, so I couldn't run any OS. I figured my computer was pretty well screwed, and at that point just decided to bring it into the shop and have them completely wipe it.
my computer was backed up onto an external hard driven I brought it back, I reinstalled Windows. Upon restart, it said that it was still looking for GRUB, which made no sense to me. After messing around with it a bit, I decided to just reinstall Linux too. To my lack of surprise, that fixed the problem. Both OS' now ran just fine. The first thing I did on Debian was to install the Clam Anti-Virus, which I understood to be one of the best Linux anti-viruses. However, within about 10 hours, got the same problem as originally. I wasn't doing any of the same things, and between the lack of consistency in activities and the fact that I had an anti-virus running,figured it wasn't a virus. Not knowing what to do, I just left it and have been using Windows since.
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies View RelatedI edited the passwd file to modify the default shell for root from bash to tcshnow when I try to login to root it gives me the following error:"su: /bin/tcsh : No such file or directory"
View 3 Replies View RelatedI created a chroot jail in /SECURITY/Jail. But when I used the command 'sudo chroot /SECURITY/Jail' to enter the fake root, I got an error message likegroups: cannot find name for group ID 105groups: cannot find name for group ID 119.
View 1 Replies View Relatedi just installed linux mandriva 2009. i set password for root and created a user account. when i try to login as root, after logging out as user, it does not allow me and gives the error "root logins are not allowed". even it does not show the root account. if i try to go to root from konsole terminal using su root, it allows to enter as a root but when i try to start the GUI with startx it gives error.not sure what to do and why i can't see my account in GUI mode
View 5 Replies View RelatedAccidentally I changed the ownership of all the directories under / to my own instead of root:root. Now I am unable to use sudo and many bad things are happening. Is there a way to revert the changes or change the permissions again to root:root or make sudo work ?
View 3 Replies View RelatedI was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies View RelatedMy linux distro is CentOS 5.3. Today I edited /etc/sysconfig/readonly-root and set "READONLY" to yes, now my /etc/sysconfig/readonly-root file is like this:
# Set to 'yes' to mount the system filesystems read-only.
READONLY=yes
# Set to 'yes' to mount various temporary state as either tmpfs
[code]...
I run ProFTPd with TLS authentication on my Debian Lenny server. My problem is that despite of the fact that my users connect chrooted, one of my friends had root privileges after logging in form a Macintosh and could browse the root directory, too.
View 1 Replies View Relatedthe terminal and logged in as root i was changing file permissions and happened to change the root folder to 700. Now my icons have gone and i can't even access the terminal.
I was just wondering if it is possible to go to rescue mode using the cd and restore all the appropriate file permissions to root/ users if possible
I am trying to install google chrome on my computer, it is in a .deb package and I am using dreamlinux. Earlier today I installed a .cbr/.cbz file reader from root, that was also a .deb and it worked just fine. now I go to install google chrome and it says (Blue is my command, and red is the system response):
I checked under my USER GROUPS and Root is still set as root, and I haven't been using it unless I need to install with it to other directories, Should I be using another command to install? or is it a problem that may affect other aspects of my system? ... My biggest concern is not getting google in, I can wait for that ... I just wanna know why ROOT is under the impression it's not a superuser.
I've started to get emails that would typically come from [URL] as [URL]. These emails come from services that send out emails (backup programs) directly, or from cronjobs. I've logged in as the non-root account and either sudo su - or su - to root and the restart the service at one point or another. If I login directly as root and bounce the service or cron the emails come across as from root. I don't see anything in my environment variables after I su to indicate what would cause this. I'm not sure where else to look? A pam setting? This seems to have happened between Fedora 10 and 14 (did a bunch of overdue upgrades recently) I've only got Fedora so I don't have anything to compare to. In Fedora 10 I did not have this problem.
View 2 Replies View RelatedI need a way to find all the files not owned by root:root on the commandline. How can this be done?
View 2 Replies View RelatedI edited fstab to automatically mount my windows data partition on boot, but I screwed it up by not specifying the file system type, however that is not the problem, I was able to fix that easily. The problem was that when it failed to mount the partition, Debian automatically entered root and I guess that is to be expected in order for me to fix it, but I never configured a root password and it just gave me full root access without asking any password, not even my user password. I though that was strange so I set the root password and sure thing it asked me for the root password this time without automatically logging into root....
I then tried to lock the root account to see if it will ask me for a password or not, it did but of course I wasn't able to login as root because it was locked now and I was left with no way to access the system. I had to fix fstab from a live cd so that I can login normally as the user....
I didn't know what to search for or if that is the expected behavior if you don't set root password during installation, but it just seemed a bit strange to automatically enter root when you specifically disable root login during installation...