Ubuntu :: Cannot Open Website Files Via Localhost After Upgrades/software Installs
Oct 13, 2010
I did a fresh install of Lucid 32bit and install LAMP via Mark packages by task *LAMP server...Everything worked fine I could view files via firefox php an all worked... I did the system updates ( since clean install ) and went on a software getting spree... Then I tried to get back to my work on web site and I can no longer connect to localhost via firefox... 127.0.0.1 doesn't work either I tried to restart apache2 and still nothing.
View 1 Replies
ADVERTISEMENT
Mar 21, 2010
BACKGROUND: After years of having an idle machine with Linux on it, I want to use it everyday. My preferred distro is Debian Lenny. It is running on a 1999 Compaq that I want to use for testing. So far, configuration has been logical and steady.
PROBLEMS: So far, only Suse will install completely on my newer machine.
Fedora and Knoppix were also tried, and did not work.Where should I look to begin to troubleshoot this? This is not a rush job. I have time to do one or two things per day.
View 12 Replies
View Related
Feb 10, 2010
I'm not sure if this is the right place to post this, but...well, I just installed Fedora after using Ubuntu for a while, and everything has been going good, except for installing upgrades. When I open the Update Manager, it says there is 399 updates. When I click install, after about ten seconds this pops up:Code:An internal system error has occuredA problem we were not expected has occured. Please report this bug in your distribution bugtracker wth the error description.
More details:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
[code]....
View 4 Replies
View Related
Apr 18, 2010
I open Firefox, Some Website Works, on some other Website Firefox Says "Connecting to...",but all the Sites I have Tested working on my Windows 7.
View 3 Replies
View Related
Nov 6, 2010
Made some network and hardware changes, and now I can't get the mailserver to work. It seems that sendmail can't loop to itself on 127.0.0.1. When I nmap localhost, I find that port 25 isn't open.
Naturally, nothing has changed on my system except for different routing, interfaces, etc.
So the question for sendmail gurus,is where should I be looking?
View 4 Replies
View Related
Dec 1, 2010
Im using the Redhat 5, when m trying to connect from X-start it showing error:
Can't open display: localhost:0.0
Where as /etc/ssh/sshd_config settings are correct
Also ssh is running
$DISPLAY is set to localhost
still it is not started any x-service
View 2 Replies
View Related
Mar 31, 2011
I'm trying to connect to my linux server but I'm having some major problems. The server had OEL 5 installed and my local pc is running Windows XP. I'm using PuTTy to connect to the server with Xming running on my loacl machine. I login as root and run the following command - export DISPLAY={ipaddress}:0.0I then run xclock and get the following error - Xlib: connection to "{ipaddress}:0.0" refused by serverXlib: No protocol specifiedError: Can't open display: {ipaddress}:0.0The strange thing is that on my bosses pc (who has got almost the exact same setup ie. PuTTy & Xming) is works perfectly.
View 2 Replies
View Related
Mar 31, 2010
I've just moved on to 10.04 from 9.10. The program worked fine in 9.10. I *may* have overwritteen a conf file in the upgrade...
I now get the error as below:
My userdir.conf is like this:
<IfModule mod_userdir.c>
UserDir public_html
UserDir disabled root
<Directory /home/*/public_html>
[Code]....
and I have the PHP5 module installed. I vaguely recall that I may have had PHP4 installed - would the upgrade have removed it? Is there anywhere I can get it from to try? Anything else to do?
View 9 Replies
View Related
Jun 25, 2011
I have four hard drives in my machine with several different O/S installs.
I have a couple of Linux distros, win xp, and win 7.
I'm wanting to view all my files in a file manager such as Dolphin but it only shows the Pardus that I am running and the other Windows installs.
My other Linux installs do not appear.
I've recently switched from Windows where I am used to seeing all the different Windows installs on windows explorer.
Is this not possible to do in Linux?
I am wanting to move some files from one system to the other and this is frustrating not being able to see them.
View 4 Replies
View Related
Sep 25, 2010
I was trying to remotely log in to my desktop which uses 11.3 from my laptop via ssh. For some reason I get an empty field for the command echo $DISPLAY. and as a result an xclock command results in error: can't open display. I tried to set it to localhost:10.0 and I get: Error: Can't open display: localhost:10.0
I've tried :0.0 and I get: Invalid MIT-MAGIC-COOKIE-1 keyError: Can't open display: :0.0 ssh used to work about a week ago before I performed various security updates. I was wondering what' the solution to this. I checked the /etc/ssh/sshd_config file and ssh_config file both have X11 forwarding on. Can anyone with more experience out there give me any ideas?
View 9 Replies
View Related
Apr 6, 2010
When I attempt to use Putty for xterm (to run DBCA for Oracle) I check x11 and put my IP Address in the Display field of putty. However, when I then try to execute ./dbca I receive the following:
Xlib: connection to "localhost:10.0" refused by server
Xlib: PuTTY X11 proxy: wrong authentication protocol attempted
Error: Can't open display: localhost:10.0
I notice the following when logging in to the server as well.
Last login: Fri Mar 19 13:51:19 2010 from 10.47.48.33 /usr/X11R6/bin/xauth: error in locking authority file /home/oracle/.Xauthority. These are the same steps I take successfully on all the servers. The above file exists on the servers I can initiate the GUI, but not on <server1>.
View 5 Replies
View Related
Jul 5, 2011
I'm SSH'ed in to my Ubuntu 11.04 machine and trying to take a screen shot of a virtual display where I'm running (hopefully) Firefox. I get the error
Code:
selenium@selenium:~$ xwd -display localhost:15.0 -out ~/desk.xwd -root
xwd: unable to open display 'localhost:15.0'
I know that I have displayed the right display variable because in an earlier script that runs at system bootup I have
Code:
export DISPLAY=localhost:15.0
/usr/bin/Xvfb :15 -ac -screen 0 1024x768x16 &
View 1 Replies
View Related
Apr 15, 2010
I have a problem with one of my new OpenSuse installation. I install ntop on this machine so the port 3000 become open, but when i want to use it on a other pc, it cannot see the open port. I really don't understand why i cannot access this port.
I disabled firewall to make sure everything pass.
Here my ntop on my localhost
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
Here my ntop from another host
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
View 2 Replies
View Related
May 17, 2011
I have worked with xampp on windows. Its my first time with Red Hat Enterprise Linux 5 .
Problem Is In My company we have redhat entprise 5 and its running well with samba server for our intranet. I wants to upgrade the intranet by using joomla. Problem is i have installed the xampp succesfully but when i type [url] it still opens our old intranet's homepage.
View 2 Replies
View Related
Oct 30, 2010
I have a crontab on my vps running every minute that checks to see whether or not a certain port is open on localhost. If the port isn't open, it should run the php script to restart the program. However, I require the use of screen to be able to interact with the program whenever I reconnect to the vps through shell.The problem is, screen is being a pain by saying "Must be connected to a terminal."This is the php script:
Code:
#!/usr/bin/php -q
<?php
[code]....
View 5 Replies
View Related
Jun 25, 2010
FreeNX server is SUSE 11.2 /(i586)
Cliente is windows 7 (64)
NX> 148 Server capacity: not reached for user: usb
View 4 Replies
View Related
Mar 8, 2010
I have cablenet connected on Windows XP. On windows it's working fine. On windows XP it alwasy ask me username and password and then it starts to work.But same cablenet is not working on Ubuntu on same laptop. It shows "connection established" if cable is connected. But I can not able to open website.
View 9 Replies
View Related
Nov 2, 2009
-i'm install fedora11 on my computer -i'm update software with system>administration>software update -i cannot open some website (ex. [URL]) that display
Server not found
Firefox can't find the server at [URL]
* Check the address for typing errors such as ww.example.com instead of www.example.com
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
-and i try to access another that found the same problem
-but i open that website it can be open with firefox on window XP
View 13 Replies
View Related
Jul 1, 2010
I try to add a folder to my localhost folder on my cpu yet it doesn't allow me, saying I don't have perms? How can I fix this?
View 1 Replies
View Related
Dec 8, 2010
i have a problem with my new router and ubuntu 10.10. The problem is that my internet connection show me that my laptop had connect to internet but my browser can't open a website ( this problem is the same with my netbook ) to fix it always must turn it off and after on either it never makes.
View 4 Replies
View Related
Jun 17, 2011
localhost not opening php files text editor
View 1 Replies
View Related
Jan 9, 2010
they keep coming up with Error: To many open files but none of the files in them are open?
View 4 Replies
View Related
Mar 2, 2011
I visited the website of git which contains the sqf files e no download link and the site is pretty confusing for me which has some unique terms like "watch", "Push""Commit","Merge","clone" "Pull" and so on!Queue files seem to be a very nice concept however and I want to test it.After downloading , I have to start sbopkg and use the option for "Create build"? and how do I refrence the sqf file?should it reside in the same directory in which I run sbopkg?
View 4 Replies
View Related
Dec 12, 2010
Server - Ubuntu 10.04.1 lts
Client - Kubuntu 10.10
When I try to open any nfs-mounted file using OpenOffice, I get a pop-up window titled "Document in Use". The text of the message is:
"Document file 'abcde.odt' is locked for editing by:
Unknown User
Open document read-only or open a copy of the document for editing." I then have three options - <Open Read-Only>, <Open Copy>, & <Cancel> If I cp any of these files from the mounted directory to my home dir (not mounted), I can open them without problem.Also, my firefox & thunderbird date are in this mounted directory as well (sym links to ~dan/.mozilla & ~dan/.thunderbird). Both of these apps hang when trying to open, leaving two processes behind that need to be manually killed. Again, cp'ing the data out of the nfs-mounted dir onto a local dir resolves the issue, so I am 100% confident there is nothing missing or corrupted in the firefox &/or thunderbird data...
relevant entry in /etc/fstab:
server:/nfs/dan/Documents /home/dan/Documents nfs defaults 0 0
relevant entry in server's /etc/exports:
/nfs/dan/Documents client(rw)
View 8 Replies
View Related
Mar 12, 2010
I have just set up my web server for the first time in Linux (used to be Windows 2003). I have a web site [URL], could someone with experience please check this web site to see if the PHP files are hidden (and therefor my PHP code can't be seen). If they can be seen then how do I hide the PHP files?
View 6 Replies
View Related
May 31, 2011
I know a guy who has a website setup where he can download files from Megaupload with his premium account without signing in. He takes the MU link's ID, eg: URL... adds it to the end of the URL (URL...) and it downloads using the premium account logged in on the computer he has his site hosted on. We don't get along well and I would rather not ask him how he does it.
How would I set this up on my own computer? I can see this being extremely useful for me if I need to download some of my artwork or projects from MU but I don't want to sign in because I'm on a public computer or something. I already have everything installed on my computer to host a site. I have a simple "Hello World" page running on my webserver right now. I don't need help getting that part set up, just the rest of it.
View 1 Replies
View Related
Jun 4, 2011
The original thread was closed because "Sounds as if you are trying to steal a service which you have not paid for. We do not support that kind of activity here on Ubuntu Forums." However, it's not stealing since I am only going to use this with accounts that I have legitimately paid for.This might not be the right place to post this... if that's the case, I apologize - please move it to the correct location.I know a guy who has a website setup where he can download files from Megaupload with his premium account without signing in. He takes the MU link's ID, eg: http://www.megaupload.com/?d=xxxxxxxxand adds it to the end of the URL (http://192.168.1.199/mu/?d=xxxxxxxx) and it downloads using his premium account logged in on the computer he has his site hosted on. We don't get along well and I would rather not ask him how he does it.
How would I set this up on my own computer to use my premium account? I can see this being extremely useful for me if I need to download some of my artwork or projects from MU but I don't want to sign in because I'm on a public computer or something or because the computer has MU blocked. I want this to be a private site that only I have access to since it's my premium account and my money. I am not asking how to circumvent megauploads download limit at all (I've already paid for it... no need to circumvent it).
I just need a nudge in the right direction. Thanks in advance for any help you can provide.I already have everything installed on my computer to host a site. I have a simple "Hello World" page running on my webserver right now. I don't need help getting that part set up, just the rest of it. I assume this has something to do with setting up a proxy server - I just don't know how to do that and make it work like I need it to.
View 3 Replies
View Related
May 29, 2010
I have a website that has a massive list of royalty free stock photos and I want to download all of them. I have bought a membership for [URL] so I am able to download as much as I want from them for the next month.
Instead of going page by page and manually downloading each set of stock photos manually, I would like to automate this process. Here's my idea:
1. Download the website with the links to hotfile [URL]
2. Use grep to retrieve all the links to [URL]
3. Feed the links I recieve from grep into wget and download the works of them.
The problem I'm getting is when I use grep, It retrieves the entire line of html code where "hotfile.com" is shown. So here is an example of one link I receive in the output:
Quote:
./1776-santa-claus-vector-set.html:<div align="center"><a href="http://hotfile.com/dl/18418176/181a55b/Santa_Claus_Vector_Set.rar.html" target="_blank">HotFile</a></div>
Is there a way to just have the link shown in the output?
PS: I have everything else working, I just need an automated process of getting all the links.
View 5 Replies
View Related
Jan 26, 2011
i have a server & there is a website which generate alot of core files, these core files takeup alot of space by time, so i decided to stop it, in WHM the core dump option is disabled, & i used the following command
Code:
ulimit -c 0 but nothing stoped generating core files, i also used the following method http://www.cyberciti.biz/faq/linux-disable-core-dumps/ also this method doesnt stop generating of core dump files, my question is : how i can permenantly stop generating core files for all users or for specific user
View 1 Replies
View Related
Oct 1, 2010
I have a while(1) loop, and the error is: glibtop: open (/proc/stat): Too many open files This error occurs after about a half hour to an hour of running. I've tried running this multiple times, both with using glib_close() at the end of the loop, using glib_init() and glib_close() at beginning/end, and just using glib_init(). The strange thing is these have no effect on the actual glib_get functions.
View 5 Replies
View Related