i use ubuntu 10.04. Everything works great, however i can not figure out how to disable my touch-pad. Yet my touch-pad features works properly such as double tapping, triple tapping or scroll. I have tried everything at [URL] (most of them is for synaptic touchpad but mine is elantech) here is the mine X11
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
[Code]....
how to disable acpi on bios.actually my bios doesn't allow me to change it so if u have a correct way to change acpi on bios,
View 1 Replies View RelatedASUS b43f with Slack 13.1, XFCE. Nothing in BIOS to allow me to do this.
View 4 Replies View RelatedI have a problem with Elantech Smart Pad under F12 on ASUS N61 notebook. I could not find the driver, and it is not possible to set sensitivity or to turn it off. It is quite annoying.Does anybody knows how to turn it off, or configure it?
View 1 Replies View Relatedi cant get this right for some reason. i switched from ubuntu to fedora. in ubuntu i had the same issue with the touchpad, but there i found a fix which worked with ubuntu, but not with fedora.[URL]... the problem in fedora is that i dont have any psmouse.ko module in /lib/modules/2.6.39.4/kernel/drivers/input/mouse so the patch cant really be applied so i get an error, saying there is no psmouse
i found a fix, but since my knowledge with linux is limited i didnt get it right. "I spent some time trying to get this working (and one will find other threads here, on the Fedora list, etc, where I was trying to get help), but the problem, in the end, is that Fedora doesn't install the PS/2 mouse driver as a module, but builds it into the kernel. So the solution was to recompile the kernel using the changed files from System 76's repo.
This is not nearly as difficult as it sounds. The process described in the Fedora docs, under Building a Custom Kernel, is easy enough to follow. In my case, it was even easier. I unpacked the kernel source by following the steps down through "Prepare the Kernel Source Tree" and then copied the source for the new "module" into drivers/input/mouse, replacing just the elantech.h and elantech.c files. I don't really care about getting an RPM, so I just built the kernel"[URL]..
Ubuntu 10.10
I tend to hit my touchpad while typing, so I prefer to disable it. I had it disabled in 10.04, but after upgrading to 10.10 it doesn't seem to work anymore.
I also downloaded the g-pointing-devices & put a check in the Disable touchpad box. This worked for a little while, then the touchpad starts working again, with the box still checked.
I've read through [URL] but I can't seem to disable my touchpad while typing (it seems to be extremely sensitive to touch).
I can't disable touchpad, else it will disable all X.org input
Code:
$ sudo aptitude purge xserver-xorg-input-synaptics
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]....
I am using Ubuntu 10.04 on Lenovo Thinkpad, and I have tree pointing devices:
- touchpad
- trackpoint
- mouse, that is connected only when I am home, so for around 50% of time.
I have downloaded a package "Pointing Devices" and tried to disable a touchpad, which annoys me. Sometimes new settings works, but each time I connect/disconnect mouse, the default settings (everything on) restores. It's even worse, because right now the touchpad works and annoys me, while it's written that it's disabled in "Pointing devices", so either the package is outdated, or it's a BUG.
How to permanently disable a touchpad?
I running acer aspire 5742 64bits intel core i3 is there a way to disable the touchpad cause is bugging me.
View 13 Replies View RelatedI am able to get my touchpad to enable disable from the bash shell using
Code:
sudo modprobe -r psmouse with or without the "-r" to turn it on or off, respectively But I wanted to write a script to do this for me because "mouseon" and "mouseoff" is easier for me to remember and more convienient. But I am having some issues (I am a complete newb at scripting, so forgive my ignorance)
the script written is:
Code:
#!/bin/bash
#enable/disable touchpad
sudo modprobe -r psmouse I have saved this script as "mouseoff" in usr/bin (echo $PATH told me this was a directory bash searches, even though it was not a directory and I had to create it with mkdir).
then I did Code: chmod 755 mouseoff However, when I try to run it, I get a "permission denied" error.Can anyone help me with what I am doing wrong?
I don't know how many has had this problem, but I understand I am not the only onehe problem is that after using synclient to disable the touchpad in 10.04 it would enable itself, seemingly, at random.Well, what I found was that unchecking the "Disable touchpad while typing" feature in "System->Preferences->Mouse->Touchpad" will fix the problem.Apparently the system does not recognize that the user has deliberately disabled the touchpad. And so it will reenable it when the user is "done typing".
View 5 Replies View RelatedI have this 17" Dell laptop, and the touchpad is huge. My family use it and when we're typing, we brush of this incredibly large touchpad and end up pumping characters into the middle of a prior paragraph.
They've reduced the size of the touchpad on the newer versions of this model, but I'm wondering is it possible to hack it somehow so the outer perimeter (say 1cm) is 'dead'?
Most configuration software available is of no use to me since I think it's not a synaptics mouse. (I don't have multitouch - that's why I think this)
This is really frustrating. Does anyone know how I can do this?
Code:
I've installed Ubuntu 10.4 onto Eee Pc 1015PE.
The mouse touch pad is a pain when your typing.
Is it possible to Disable it whilst I'm typing.
(I saw a post somewhere but it somewhere else but it was not very newbee friendly.)
I have HP DV6 laptop. when i disable the touchpad, the mouse clicks doesn't respond anymore! and i need to restart the laptop
This happen to me in Ubuntu 10.04 and 10.10
I love Xubuntu/XFCE4. How do I disable the freaking touchpad while I type, every time I even lightly hover my palm over it, it jumps the cursor all over the place.
View 9 Replies View RelatedI'm having a few problems with my touchpad on my MBP 5,5. First off, even though I have selected "disable touchpad while typing" I still randomly click with my palms when I'm trying to type. Am I missing something here? Also is there any fix for the click and drag issues? Most of what I've read on the forum here is old and the apt-get for the packages mentioned gives me a "file unavailable" error. It's okay when I'm at home but I don't normally bring my bluetooth mouse with me everywhere. If only apple had left the mouse button on here...
View 1 Replies View RelatedI'm trying to disable my laptop's touchpad because its hard to type with it on.
However most of the websites I found say to edit /etc/X11/xorg.conf, which no longer exists.
How can I disable my touchpad?
There is no touchpad tab in System -> Preferences -> Mouse
Computer: Sony VAIO
I'm running 11.4 gnome and need to be able to disable the touchpad on my laptop. I always use an external mouse.
View 8 Replies View RelatedI'm on a new netbook using Ubuntu 9.10 and I cannot figure out how to disable tap-to-click on my touchpad. I figured it would be simple enough to use SHMConfig, however; every post I've seen says they have something similar to this in xorg.conf
Code: Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection Instead, I have this ...
Code: Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
End Section
I have tried simply changing the driver entry to "synaptics," however when I run SHMconfig it says the driver hasn't been loaded.
I'm having a pretty annoying problem. I can't seem to disable clicking on my laptop's touchpad. I went into the Gnome mouse settings, but the Enable mouse clicks with touchpad option is checked and grayed out. I have also tried to edit my xorg.conf, but there is nothing in it! Lastly, I've tried to edit 10-synaptics.fdi file, but that didn't do much
View 1 Replies View RelatedWhat can I do to disable ONLY the LEFT touchpad button on my laptop? Left Click sticks by itself randomly, this causes problems when using my USB mouse (such as permanent dragging, permanent highlighting, permanent inability to left click anything, the computer is pretty much dead to me unless I try to tab around), it also causes issues with the Tap to Click, and it also causes Ubuntu to not recognize my "Left Handed" mouse button set up after boot for ONLY the touchpad. On the USB mouse, buttons work swapped.
Current solution: Left Handed Button Swap. Touch pad to click. Right touchpad button to right click. Sometimes I use my USB (which does recognize the swap). This is the 3rd install of vanilla Ubuntu (tried it just in case). That's not the issue. This is a Dell Inspiron 6000. I want to just disable the left button on ONLY the touchpad, I don't want this to affect my USB mouse. I want to keep the right button touch pad working. And of course I want my mouse to work. But, actually, my ideal is to sacrifice the left button, use Tap to Click, and use the right mouse button for right clicking. If I can't save the right click, can I disable both buttons?
I have an Asus K6LIC laptop. In Windows if I press function+F9, it toggles my touchpad on and off. I'm wondering if I can get this functionality in Ubuntu 10.10. All other function keys work, except for this one. The only thing I can find is to permanently disable the touchpad, which is not what I want to do.
View 3 Replies View RelatedSince last Saturday (11-20) my touchpad enable/disable key stopped working.I don't make much use of the touchpad and it usually stays disabled most of the time so I can't be sure it is really on Saturday that I lost this functionality or maybe the day before (I'm positive it's not longer than that).Before that it worked flawlessly, now it's like a dead key (which is not broken by the way, tested on a live CD).In these past week I have been looking for quite some time for other users who might have experienced this problem after the update of two specific packages (console-data and keyboard-configuration) I had on the 20th and which made me think might have broken the key binding.Not finding anything at all and after having tried for said packages both newer versions from sid and previous known-to-have-worked-before versions from the install CD, I started thinking the problem was not there (I consequently restored the testing ones).
The days before this happened I tinkered a little bit with gpointing-device-settings and tpconfig (this last one was a simple tpconfig -i), but at this point I start thinking there might have been something else I've done, somewhere else I can't recall probably.
Oh, I forgot to mention that the touchpad still works flawlessly, I can enable/disable it through gconf (actually I made two handy shortcut to the "/desktop/gnome/peripherals/touchpad/touchpad_enabled" value), so it is not an issue of making it work, just the toggle key which on my laptop is a dedicated one (no Fn modifier) and anyway all the other special keys still work fine.I checked gnome-keybinding-properties and there is no action for the touchpad there, but I don't know for sure if there was one before (and I haven't been able to add one). Anyway in gconf I noticed a key in "/apps/gnome_settings_daemon/keybindings/touchpad" has the value "XF86TouchpadToggle", not sure if that means the keybinding exists or what.
What more can I add? What I'm here to ask now is some guidance on figuring out what I might have done wrong considering what I was able to tell you, but mostly, considering what I wasn't able to tell you and am not even aware to have done.
I am trying to disable the touchpad and when I try to run synclient -l I get
synclient -l Couldn't find synaptics properties. No synaptics driver loaded?
My xorg.conf follows:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
I also have an option in BIOS to disable touchpad when external mouse is plugged in, which I enable without any result.
Is there any software out there that can disable the touchpad on your laptop? The one I use on another distro is QSynaptics. But quite honestly, as long as it disables it, I don't mind what software it is.
View 1 Replies View RelatedI login as root every time (its a closed system) and I am running it on a laptop. I want to disable the touch pad after typing for 4 seconds.I have tried adding this command:syndaemon -i 4 -dto rc.4, rc.local, rc.httpd, http.mysqld
View 7 Replies View RelatedLooking for opinions on what is the best way to disable the touchpad on a Sony VAIO. I just installed Slack64 13.1 and love it...
View 10 Replies View RelatedThe "Check if already posted" brings up no results. I've installed Ubuntu 11.04 with Wubi on my Window7 Home Premium laptop. No problems, except that I can't find "System" to make adjustments, specifically:
(1) Disable touchpad (it is disabled in Windows7).
(2) The display is only using about two-thirds of the screen (11.6" Samsung X120). In the Windows7 setup I do have the resolution set at 125% because the fonts are terribly small otherwise on this quite high resolution display.
During the installation I was not taken thru settings screens for things like language, video, like I have been on the very rare occasions I've installed a Linux OS onto its own partition, presumably because Ubuntu 11.04 is being installed as part of Windows7.
this issue has been bugging me for years. I want the same capability in Fedora that exists in most recent versions of Windows -- disable the touchpad on my laptop if an external mouse is plugged in. Note that my how-to is a little hardware-specific regarding the actual disabling of the touchpad; I'll discuss that more at the end of the guide.
So, here goes: For my OS (Fedora 13 x86_64) and hardware (Dell Precision M4500) - I needed a specific utility and three scripts. This Dell's trackpad and nipple-stick are seen as an 'internal' PS/2 mouse by Fedora, so I had to install 'xinput' to disable it.
[Code]...
I have installed gpointing-device-settings. It does exactly what I want it to do, disable the touchpad, until I reboot (not sure about logging out/in) and the touchpad is again enabled. So the vicious circle continues and I disable it for the session. Back in the days of xorg.conf it was easy enough to disable but of course that file, and the option to disable from within that file no longer exists for me. When I use Debian I can modprobe -r psmouse. That was a perfect solution as the touchpad was never heard from again with regard to that distribution. Attempting to remove that module under Fedora 15 results in the following.
Code: [glenn@f15beta ~>$ sudo modprobe -r psmouse FATAL: Module psmouse is builtin Is this something that I can change? I assume that built-in means that it's built in to the kernel? How about this angle. When I use gpointing-device-settings to toggle the touchpad on/off there must be one or more files that are altered. How easy would it be to find out exactly what files are altered and could I possibly set the immutable flag on this file so that it never gets toggled back to enabled again? There is a function key on this laptop, F9, that looks like it toggles the touchpad but it doesn't work under Fedora 15. Never tried it in any other releases.
