I put together a p4 that has 3 slots for ddr memory and the specs say maximum memory is 2 G at 400 Mhz or 3 G at 333 Mhz. Now, I assume this means that if you install a third memory stick, it will run at 333 Mhz. Is this right? Which would be better out of curiosity?
View 5 RepliesI have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
View 1 Replies View RelatedI get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
I have had a fresh install of Ubuntu 9.10 and installed some software after that.Since third some, some process is eating half of my memory.I have checked processes running in system manager but everything is normal.Maximum is consumed by compiz which is about 26 mb, seems very normal.I did restarted my computer several times, and in the start for 5 mins, its fine after that again my cpu fans runs at very fast speed and my one cpu is used up 95 % (I have dual core).Please help me out, this invisible thing is driving me crazy.I am attaching my htop screen shot (sorted by cpu %), now the cpu is not used by completely but fan is still struggling hard and fast.
View 9 Replies View RelatedI am using malloc and frees a lot in my program. It shows its allocated but when i remove it doesnt show as the memory is removed(I am using the top command to view VIRT memory usage). If this continously grows what would happen to my program (Will it go out of memory?)
View 4 Replies View RelatedFedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
let me know how to clear cache memory ( RHEL 5.1 ) as it consumes almost 100% physical memory.
View 3 Replies View RelatedI am looking for free database that has low memory usage and innodb and memory like engins that has C API and support trigger and client/server support for using in embedded linux systems.
View 8 Replies View RelatedI am new to C and linux. My code below does arbitary writes but I cant figure out where or how it does it.
I am calling the insertNode() function with seq = 'MISSISSPPI$' and alphabets = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ$'
Code:
Weird behaviour I should mention is that when I check for NULL pointer in node->child[index], the unassigned values are not null anymore, they point to arbitary memory.
we found that if we use 'top' to show the memory usage of a server (SuSe Linux 10), we can get virtual memory usage as well as 'Resident memory' usage. For virtual mem or a particular process, it is around 1.1GB, which is large but for resident memory, it only consumes 300MB. Are there anyone who knows what the differences are? I would also like to know whether the difference (1.1GB - 300MB) = 800MB are actually available for use by other applications in the system.
View 1 Replies View RelatedHow do I write a script for my Linux that can show me total memory vs used memory and have it email me results if it's over 70 percent?
View 2 Replies View RelatedI am monitoring physical memory in a server I administer, and my hardware provider told me they had increased physical memory size to 4Gb... However, using several tools (free -m; top; dmesg | grep Memory; grep MemTotal /proc/meminfo I discovered that I actually have 3Gb, not 4... But, my doubt comes from the fact that dmesg | grem Memory tells me I have 3103396k/4194304k available The first number is effectively 3Gb, but the second one, is 4! so, why I am looking at this two different numbers?
View 1 Replies View RelatedI am writing an application that wants to access periphals registers outside the standard (allowed) memory area.
Doing so gets me "segmentation fault".
I know, this is natural behaviour.
One way of getting around this is writing the module which has to be loaded by linux. I will consider this some time later.
For now, I want to come to some quick result and allow linux or gcc compiler to write to those memory areas of periphals. Is there a direct way to do so?
Is that possible that SHM shared memory is counted as cache memory on Linux with kernel 2.6.18?If find it really odd since this memory is not file backed, but I have a piece of code that loads data using shm_open+mmap, and it generates an amount of cache memory in /proc/meminfo that corresponds exactly to the amount of shared memory (I load that data from a file but I am using posix_fadvise(fd,0,0,POSIX_FADV_DONTNEED) to ensure this file is not cached and I made sure that it is working as expected). As far as I know SHM memory was not tagged as cache memory with kernel 2.6.9.If it is the case it is really unfortunate since normally cache memory can be considered to be part of the "available" memory since it can be flushed promptly but this is clearly not the case with SHM memory... Is there an easy way to get the total amount of used SHM memory on a system?
View 4 Replies View RelatedI currently have the Ubuntu 32 bit 9.10 installed on my laptop. I wanted to install WinXP 64 bit using VirtualBox. My question is: will WinXP 64 bit run faster on Ubuntu 64 bit than it will run on Ubuntu 32 bit (my current OS)? Is the upgrade from Ubuntu 32 bit to Ubuntu 64 bit worth it for running a virtual Windows XP 64 bit?
View 3 Replies View Relatedaccording to this article i read, its definitely faster. this is what i read: Since 64-bit systems can process twice as many instructions per second as a comparable 32-bit system, 64-bit systems are definitely faster than their 32-bit counterparts. it was from this article link: [URL]... Is this true? I always thought it wouldnt make a difference, besides more memory addressing?
View 9 Replies View RelatedI am using Ubuntu 10.10 64-Bit Desktop Edition, and I am looking for a faster way to rip CDs, without having to resort to Windows. I try to rip a CD, but it takes 20+ minutes just to get the files copied, then another 5 or so minutes to burn the cd!I have a new SATA interface CD/DVD burner, so I know it is not the hardware.
View 7 Replies View RelatedI installed preload, I unchecked all startup applications, I uninstalled programs I wouldn't use. Any other tips for a faster Ubuntu?
View 9 Replies View RelatedI am considering installing Linux on my workstation to develop and run fortran codes much faster than windows. I wonder if there is significant speed difference between Linux distros. Especially between Redhat and Ubuntu or Debian. I havent used any Linux distro longer enough to have an idea about its speed while running long codes.
View 5 Replies View RelatedI have windows xp professional installed and I have 256 MB RAM and 80 GB hard disk.I installed Ubuntu 10.04 LTS Desktop Edition alongside on windows on a formatted 12 GB C drive(windows on E drive).When I used linux it was very slow but my windows is running smoothly.How can I get normal and smooth speed on linux as I have it on windows.Will removing the windows speed up linux?
View 4 Replies View RelatedThis is my first post in these forums. I'm still quite new to Linux (using Mint 9) so please bear with my not-very-articulate question(s)When I boot up and open up a tty terminal I get a message saying "Memory corruption detected in low memory." I've done an extensive google search about the issue and it seems not uncommon. I ran a memtest with no errors returned, so I'm sure that there's nothing really wrong with the memory; apparently it's a bug in the kernel that's causing this.
View 2 Replies View RelatedI found from command 'top' that 8GB memory are used. However, using command 'ps' with some options to grep the running processes and then summing up the memory used by the running processes are less than 2 GB. Where has the used memory gone ?
View 7 Replies View RelatedI have been setting up a vps I got out with bhost.net, with CentOS installed. I've been learning and have set up everying I need with the exception of ftp/sftp.
Using yum I installed vsftpd and ran into problems, thinking it was something I might of done I did a fresh install of CentOS and I still recieve the same problem on a fresh install so it is nothing I have done to the server.
The problem is when connecting via a sftp client I get an out of memory error. This error is listed in the putty faq ( url ) under A.7.5, there is a brief explaintion of the cure under A.7.6.
there is mention of a login script but I don't know where this is located. I'm a novice at Linux but by no means incompotent when it comes to computing.
I am currently backing up my data but find that it takes way to long to do a rsync, it takes forever to just find the differences and transfer them.Out of 3 separate rsyncs the main one that is slow is my www.skins.be mirror directory which is 41GB and has 392,200 files, sorted into multiple directories. Which grows by around 100 every couple days.I think that something that would be able to track changes by inotify time on directories will speed it up since Picasa sure finds the changes fast when I open it and it is tracking over 26,200 pictures. I just don't know of a backup solution that does that.
View 4 Replies View RelatedI need to find a fast way to copy a folder containing about 2 terabytes over my home network to another Ubuntu machine.In the past I have used RSYNC over ssh, but this is far too slow for this much data (probably the ssh encryption overhead slowing things down)I have looked at using SAMBA, but this seems geared for a mixed Linux/Windows network. Also I don't know if SAMBA will be appreciably faster.
View 4 Replies View RelatedOne of the most common tasks I perform is browsing for files. I have always wanted my file manager to be lightning fast. That is, I open it and it loads directories instantly. No waiting, just opening them right away. This remained always a wish, as in Windows and Ubuntu on a variety of machines I always see that it takes a little while for the program to load directories. I am not talking about folders with thousands of files or anything special. However, I have seen others who have Windows (XP in this case), and their Explorer opens right away. Browsing folders is very much instant.
Is there any way to achieve the same in Nautilus? The other computer is not very modern or super fast, at all.
I have a laptop with SSD drive which I hoped would speed up this process, but this is not the case. On both my laptop and desktop I often see the 'loading' symbol, and files often appear after the folder view has opened (they just appear all of a sudden). This happens with folders I rarely visit but also with folders I often open.
How are others' experiences? Can Nautilus be instant? Is this a configuration tweak or hardware issue?
i run ubuntu 10.04 on my old pc pentium 4, 500mb ram ,how can ido for make faster..
View 5 Replies View RelatedUbuntu booting up from hibernation is not faster compared to complete start up. In windows, you can feel the boot-up is faster if you hibernate your PC earlier. But in ubuntu, i dont feel that, to boot up from hibernation, it takes quite long time, not faster than complete new start-up.
View 3 Replies View Relatedi have read some time ago the the outer parts of a drive are faster on gparted, is that the left side or the right one?
{consider this thread solved. i don't put the tag as i would like to know for future reference, but it is not actually needed anymore}
After installing ubuntu 9.10. It's now been a month or so from a fresh reinstall.
Currently for some reason at times my computer slows down where typing starts to lag.
Is there any software that would speed up the linux os. Like for windows there is softwares that would check the registery for errors and shortcut errors etc and fix them.
I use free software like that for windows and works well. I just would like to know if I can get something like that for linux. I know linux dosen't use a regsiter but just saying software that checks the linux system for any errors that could cause the computer to slow down.