Ubuntu :: Unable To Mount The Volume 'My Passport'
Feb 15, 2010
Cannot mount volume.
Unable to mount the volume 'My Passport'.
Details
$MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). see the 'dmraid' documentation for more details.
I'm trying to reinstall ubuntu because I messed up a bunch of stuff but I need to back it up on this hard drive which won't mount in any linux distro.
View 5 Replies
ADVERTISEMENT
Feb 5, 2010
I am running a Debian/Linux "Lenny" dual boot system and when I try to open my WD passport storage device I get: Cannot mount volume. Invalid mount option when attempting to mount the volume "My Passport".
This is the contents of my fstab file:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sda8 / ext3 errors=remount-ro 0 1
[Code].....
View 8 Replies
View Related
Dec 25, 2010
I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?
View 9 Replies
View Related
Jan 23, 2010
I am trying to burn some data to CD/DVD, but when i insert a CD/DVD into the drive i get the 2 error messages shown in the screenshot below. The burn medium is not even recognised anymore by the PC.
This problem is new to me,it has suddenly appeared 3 days ago,and i have researched the forum already.
I have tried 5 other CD/DVD in the drive,but the problem is the same(some are brand new).
Iḿ using Brasero/K3b programm to burn with,but alas no joy.
View 5 Replies
View Related
Jan 19, 2009
My Windows-system has broken down and I can't reach my files on the hard drive, because i'm unable to boot Windows.
I am running Linux from the cd, but when I try to open the hard drive, it gives me an error: 'Unable to mount the volume 'C:OS''
Details: '$LogFile indicates unclean shutdown (0,0). Failed to mount '/dev/sda1': Operation not supported Mount is denied because NTFS is marked to be in use.
Choose one action:
Choice 1: If you have Windows then disconnect the external devices by clicking on the 'Safely Remove Hardware' icon in the Windows taskbar then shutdown Windows cleanly.
Choice 2: If you don't have Windows then you can use the 'force' option for your own responsibility.
For example type on the command line: mount -t ntfs-3g /dev/sda1 /media/OS -oforce Or add the option to the relevant row in the /etc/fstab file: /dev/sda1/media/OS ntfs-3g defaults,force 0 0
View 3 Replies
View Related
Jun 2, 2010
I didn't have Linux until the day Windows crashed on me for the gazillionth time. I was simply playing some music in Windows Media Player as the entire PC froze. No CTRL+ALT+DEL, no alt F4... so I was forced to hard-reset my computer using the ON-button. After that it never launched Windows again simply because it didn't feel like it. Now, we're not here to find out why Windows is a bitch about all this, my real problem lays somewhere else. Seeing as a lot of important files were on my Windows drive I figured I could just install Linux on the other drive and fetch the files from there. The problem is I can't. Every time I attempt to open the disk I get the following error:
Quote:
Cannot mount volume.
Unable to mount the volume.
Hibernated non-system partition, refused to mount. Failed to mount '/dev/sda2': Operation not permitted. The NTFS partition is hibernated. resume and shutdown Windows properly, or mount the volume 'read-only' with the ro-option. Or mount the volume 'read-write' with the remove_hiberfile-option.
Code:
mount -t ntfs-3g /dev/sda2 /media/disk -o remove_hiberfile
I've tried both the ro-option and the remove_hiberfile but in both cases I'm given this error in the console:
Quote:
Mount is denied because NTFS is marked to be in use.
Choice 1: If you have Windows.. click on the 'Safely Remove Hardware' icon in Windows task bar to shutdown Windows cleanly..
Choice 2: If you do not have Windows then you can use the 'force' option...
And thus looping me back to the first command, upon entering I will again receive the first error. Things I have tried:
- said commands or slight variants
- re-installing windows (gets stuck during installation)
- used the Ultimate Boot CD in an attempt to access and copy the files from my Windows Drive onto an external hard drive / my Linux drive
- clicking the Drive icon furiously for a period of time in hope of a different result (which obviously did not work) Seeing as I can't screw open my laptop and take the drive out I'm really hoping there is some way for me to connect to the drive from Linux and extract the files.
- most likely my Windows system files have gone corrupt and I will need a format, but I'm not willing to do that unless I'm a 100% sure there is no way for me to extract the files first. I have an Acer ASPIRE 7720G (laptop) running an Intel Core Duo T7500 and have 2 physical hard drives (each as one large partition) of 500GB, further more it has 4GB DDR2 RAM memory and a fancy graphics card.
View 9 Replies
View Related
Feb 18, 2010
I am not well versed in using Ubuntu. I was using Win XP Pro SP3 on my old machine. I decided to make the move to Ubuntu. No problem since all files on the primary drive of the old machine were just OS related. I kept all of the important stuff (music, documents, reg codes, etc.) The computer had no problem importing the songs on the external drive to the music library. I am playing songs and loving it. Now the problem... when I am starting with ubuntu I don't find the drive and I can't mount it.
I get a box stating:
You are not privileged to mount this volume
DBus error org.freedesktop.DBus.Error.NoReply:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 5 Replies
View Related
Aug 21, 2010
The problem I'm having didn't seem to be covered in other posts. Despite following what is supposed to be a straigtforward method, I am still unable to mount /dev/sda1.
Using Ubuntu 10.04 LTS LiveCD - Lucid Lynx
sudo /bin/bash
fdisk -lDisk /dev/sda: 250.1 GB
Disk identifier: 0xa08ea08e
Device Boot Start End Blocks Id System
[Code].....
I find it strange that fdisk sees the drive but mount doesn't.
View 2 Replies
View Related
Jul 10, 2011
When I installed Ubuntu, I created an 52 gb encrypted partition which shows up in the disk utility, and in the window that opens when I click on the "home folder" icon. I get my normal windows partition, and under that the 52 GB LVM2 partition. But when I try to access it, I get this error.
Unable to mount 52 GB LVM2 Physical Volume - not a mountable file system
This is what fdisk -l shows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 52 409600 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 52 30452 244193280 7 HPFS/NTFS
[Code]....
How can I fix this, and be able to access that 52gb partition? This is only my second day that I work with Ubuntu, so If more information is needed then let me know
View 9 Replies
View Related
Jul 27, 2011
When I try to open my flash stick's folder:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Here are some, probably, useful information:
root@debian:/home/dagrevis# fdisk -l /dev/sdb
Disk /dev/sdb: 2004 MB, 2004877312 bytes
129 heads, 32 sectors/track, 948 cylinders
Units = cylinders of 4128 * 512 = 2113536 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
On Windows it works... only problem - the Windows don't work as I want.
View 2 Replies
View Related
Mar 17, 2011
I just installed linux fedora 14 on my hp probook 4320s with installation CD with this name: Fedora-14-x86_64-Live-Desktop. Then I installed it on the hard disk. During installation I chose to encrypt hard disk. When I try to access my hard disk it says "unable to mount 250GB LVM2 Physical Volume, Not a mountable file system". What can I do to get access to my hard disk?
View 4 Replies
View Related
Apr 8, 2010
I believe server section is the best when speaking of RAID stuff...
I have the following situation:We have a DELL T3400 with embedded fake raid on it. I dont know exactly how the system was setup (I wasnt here at that time), but the RAID was enabled in bios and while booting, the two harddrives would be seen as members of intel raid volume0 (RAID 1 mirror). I am not sure if the software raid was actually properly configured in Linux (Fedora 9) and if the OS was reconstructing the whole raid or it was just the bios part that was mirroring the /boot or just some parts of it. Frankly I find these hydrid raids very confusing.Some bad disk manipulation from my part caused the server to crash, but I was able to recover and boot just with one hard drive after using fsck.
I decided to get rid of the raid as it's not the right solution for the application we need it for and decided to go for a traditional single harddrive system and to use Ghost for Linux to clone to a spare disk when backups are needed.So I installed the latest Fedora 12 distribution onto another harddrive and disabled RAID in bios (changed from RAID ON to autodetect, which is the only other option).
Here is what I have now:
/dev/sda has the newly installed fedora 12
/dev/sdb is an empty harddrive that I would use as an intermediate
/dev/sdc is the old harddrive member of intel raid volume0
sdb was partitioned into sdb1 sdb2 and sdb3 and I created an ext3 filesystem on sdb2. The hard drive belonging to RAID volume0 (sdc) has a lot of work done on it and I would like to be able to recuperate the files to the new disk (sda). I cannot mount that old harddrive while in fedora 12, as it sees some unknown raid member filesystem on it probably assigned by the intel raid chip.
So I decided to do it from the other side: to boot from raid volume 0, and from there mount a third intermediate harddrive (sdb) onto which I would copy the documents and then mount the same harddrive from the newly installed fedora 12 and copy those documents from that intermediate harddrive.I can mount /dev/sdb2 from fedora 12 fine and copy stuff to and from it, but not when I boot from the RAID volume 0 harddrive (sdc) with fedora 9 on it. It keeps saying that the partition in question (/dev/sdb2) is an invalid block device.I am stuck here, as my knowledge in this sort of things is very limited.If somebody can indicate me how to recuperate files from that old raid harddrive onto the new fedora 12 drive, I would appreciate a lot.
View 3 Replies
View Related
May 5, 2011
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
View 2 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type
fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running:
mdadm --zero-superblock /dev/sda6
mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf
mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module
[root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4
Enter passphrase:
Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume: mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
Now, I unmount the volume
cd ~
Code:
umount /ftdata
cryptsetup remove ftdata
And now, if I try to setup my encrypted volume like this:
Code:
[root@localhost ~]# cryptsetup create ftdata /dev/md4
Enter passphrase:
mount -O noatime /dev/mapper/ftdata /ftdata
I get this error:
mount: you must specify the filesystem type
[Code].....
View 1 Replies
View Related
Jun 6, 2010
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running: mdadm --zero-superblock /dev/sda6 mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module [root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4 Enter passphrase: Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume:
mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
[Code]....
So why is it that I can't mount my encrypted volume after the first time? I am giving the correct password when it asks to.
View 3 Replies
View Related
Jun 30, 2010
I have two internal hard drives.I just installed Debian Lenny in the smaller 80GB. But when I try to access the other hard drive it shows:
"Invalid mount option when attempting to mount the volume"
info:
-The 80GB is on dual boot with Windows 7 and Debian Lenny.
-The 500GB secondary hard drive is NTFS filesystem.
View 1 Replies
View Related
Jan 18, 2010
I plugged in USB(single fat32 partiton of 2GB) and got message window Cannot mount volume. Invalid mount option when attempting to mount the volume.
[Code]...
Also did check in gparted , dosfsck and fsck.vfat but no errors reported.
View 5 Replies
View Related
Apr 8, 2009
Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
View 2 Replies
View Related
Jun 7, 2010
I keep getting this error message. i don't want to go back to windows but if I can't fix this I'm afraid I will have to so I can listen to my podcasts. Does anyone know how to fix this error?
View 9 Replies
View Related
Oct 5, 2010
It's been days that I've been with this and I'm getting to the end of my wits.
I tried to create a RAID-5 volume with three identical 1tb drives. I did so, but I couldn't mount the new volume after a reboot. Mdadm --detail told me that of the three drives, two were in use with one as a hot spare. This isn't what I wanted.
So I deleted the volume with the following commands:
mdadm --stop /dev/md0
mdadm --zero-superblock /dev/sdb /dev/sdc /dev/sdd
mdadm --remove /dev/md0
Then I rebooted the machine, and used fdisk to delete the linux raid partitions and re-write an empty partition table on each of the drives. I rebooted again.
Now I'm trying to start over. I purged mdadm, removed the /etc/mdadm/mdadm.conf file, and now I'm back at square one.
Now for whatever reason I can't change the partition tables on the drives (/dev/sdb /dev/sdc /dev/sdd). When I try to make a new ext3 filesystem on one of the drives, I get this error:
"/dev/sdb1 is apparently in use by the sytem; will not make a filesystem here!"
I think that the system still thinks that mdadm still has some weird control of my drives and won't release them. Never mind that all I want to do even now is just make a RAID-5 volume. I've never had such difficulty before.
View 1 Replies
View Related
Dec 27, 2010
I suspect that one of the disks is broken in my lvm setup. I need help verifying this. The only trouble is that everything looks okay in my eyes.
When i try to mount the logical partition. The system hangs.
"mount /dev/fileserver/media /var/media"
I have tried locating the problem without success. The same with a live cd.
Here are some of the commands i have run:
http://pastebin.com/gYyJtUvQ
View 8 Replies
View Related
Mar 5, 2010
I'm trying to mount an LVM2 volume, but all the instructions I see online say to mount the Volume Group, such as 'mkdir -p /mnt/VolGroup00/LogVol00'but I don't know how to figure out the name of it. I see the drive in Palimpsest, and that's all the info I know.
View 2 Replies
View Related
Mar 23, 2010
I have three partitions in my disk (Ubuntu, Debian, and Home).
When booting from Ubuntu I can perfectly get access to Debian partition and home partition. But when I try to access Ubuntu or home partition from Debian I receive this message: "Cannot mount volume. You are not privileged to mount this volume."
View 3 Replies
View Related
Feb 9, 2010
I have a 2nd hard drive that I have encrypted using true crypt. Is it possible to set this up with key files (or some other way) to auto mount when linux boots. I need it in true crypt because there are some work programs I dual boot to use in windows, and need to have access to the drive in XP from time to time, and true crypt can mount there as well. But 90+% of my time is in linux and I would like to have it auto mount through fstab (or whatever way it needs to be). My entire linux setup has been set up with encryption through dm crypt and LUKS (except for /boot). So I would think having a key file stored on the computer and an auto mount fstab would be just as secure as however secure my LUKS setup is. So any way to auto mount a true crypt 2nd drive volume?
View 3 Replies
View Related
Jul 26, 2010
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies
View Related
Feb 9, 2010
I try tou Mount NTFS partition, and i i have this error massage:
"Cannot mount volume. Invalid Mount option when attempting to mount the volume"
View 8 Replies
View Related
Jul 20, 2010
I have installed debian recently and not able to mount any other volume except FileSystem. It says -You are not privileged to mount this volume.I have tried everything including raising the permissions of the user and changing the group to root but in vain.??
View 4 Replies
View Related
Jun 14, 2011
The drive is mounted, and I'm saving files to it, but I can't navigate to it in terminal with the cd command. I can access other USB drives. Is it the space in the drive name? how to access the directory?
View 3 Replies
View Related
Feb 19, 2011
I used Squeeze live disc to verify that it supports my laptop fully. Squeeze was able to detect and load my USB WD Passport 250GB drive. I installed the OS and now the same drive isn't automounted. Every time I plugin the drive I see following message:
Unable to mount Data-istan
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
My drive is named Data-istan. I faced some other issues but found help on Wiki but couldn't find help related to this topic. I intend to put all my experience on Wiki. FYI, I have ntfs3g package already installed.
View 5 Replies
View Related
Aug 25, 2010
Do you think it is possible to unlock the hard drive in Linux? I like the idea of password protecting my files, just wish I could unlock the files in Linux.
View 1 Replies
View Related
