So I installed my ATI graphics driver in Ubuntu 10.10, and it took my pretty startup splash logo away. I tweaked around with this and I got the splash back, but it's big, and terrible res.
View 3 RepliesI'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I have Ubuntu 9.10 and I want to replace the splash screen with the white Ubuntu logo and the marquee progress bar with that of Xubuntu with those whirling sparkles.
View 1 Replies View RelatedFooling around with trying to edit splash themes, and in trying to apply one, I broke the startup splash. The shutdown splash still works. I know that update-initramfs -u is supposed to fix this, but it hasn't. I run dpkg-reconfigure plymouth, and it gives me the list of themes; I can pick one, and it seems to do its thing; I run update-initramfs -u, and that looks like it worked too; but then I reboot, and the shutdown splash is unchanged, and the startup splash is just a black screen until GDM loads. It's as if I hadn't changed anything.
View 1 Replies View RelatedI've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
View 2 Replies View RelatedThis is some thing that I've noticed with any install of Ubuntu whether its regular Ubuntu or Kubuntu etc. The splash that comes up with the distro name Ubuntu/Kubuntu on start up look perfectly fine and as it should until I've installed my Nvidia drivers. then it goes all bung.
Lower Resolution. Slightly different colouring and Not taking up the whole screen. Sometimes it even sits slightly to the right.
Is there a way that I can fix this? I know its nothing all that major but it would be nice if it looked as its meant to.
I've seen similar posts but nothing that's been able to solve my issue.
System
Linux qbit 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 x86_64 GNU/Linux
Desktop
Gnome
Issue
Upon boot I can see the Ubuntu splash with the 6 white progress dots. No GDM or X11 session is started automatically with the progress screen simply remaining on display.
Temporary Solution
Stop GDM on vty7 and start it on vty1 or anywhere else for that matter - just not vty7 as this won't work. code...
I'm running a dual boot Win7 and Ubuntu 10.04. I have them both partitioned on a 1TB drive and I also have 2 250gb internal hd's hooked up. So starting maybe yesterday, I was noticing that Win7 started crashing for absolutely no reason whatsoever where it freezes and the mouse and keyboard are unresponsive. Today I did a system restore because I was tinkering in the registry so I thought that could have been the issue. Crashed once since. But runs longer. I also checked the event log and doesn't divulge anything explaining the system crash.
And just now, I tried booting up Ubuntu and after grub, the purple splash screen flickers back and forth to the text based terminal startup. All I could make out once was "could not read partition table." that was really the only significant thing I could make out. It flickers too quickly for me to really catch what its saying.
Question 1: whenever I boot the Linux machine I recently put together I see "ok" on all the startup items except Mediatomb. It always reads: "Starting upnp media server mediatomb [fail]."So I run it myself via sudo /etc/init.d/mediatomb startIn the mediatomb default file NO_START is set to "no," hence why it tries. But why does it fail? The guide I followed to install it intended for it to run at startup, but it just fails.Question 2: When I manually start mediatomb, and I later access it on another machine via the browser, it's all good. But on the monitor of the linux machine the command line goes bye-bye. It's just a cursor, and commands don't execute. Is there a keyboard combo like ctrl+alt+f-something that brings it back?
View 3 Replies View RelatedI recently upgraded my Karmic to Lucid lynx and the splash screen at startup was missing. i thought i just needed to reboot my p.c and it will be fixed but it did'nt.
View 1 Replies View RelatedI recently installed kubuntu-kde and it changed the boot splash theme from an orange logo on a purple background to tourqoise on blue. How do I change it back?
In KDE, I can navigate to Settings > System Settings > Appearance > Splash Screen but that's not what i'm looking for. I'm not trying to change KDE's Splash Screen that shows when you load the KDE window manager after logging in as a user. Further, I'm not trying to change grub's boot splash image, which renders this guide useless.
I want to change the boot splash theme which lasts 25 seconds that is shown between the time your select the kernel in grub2 and the time gdm loads. Right now it says "Kubuntu" in an ugly way and I want to change it back to what it was originally before I installed KDE. I want it to say "Ubuntu" as it should by default.
I upgraded from 9.04 to 9.10.SSH, samba, LAMP server, etc etc etc are now failing to start when the os boots. I can start all of these services manually but is a bit of an annoyance.Maybe something simple but am not sure where to look to fix this.
View 4 Replies View RelatedRegarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View RelatedI have a question regarding to the Graphical Splash Screen. Is their a way to show the text based startup on booting your OS? So. I don't the OpenSuse Background with the loading line. But i want the half transparent black background if possible or just the black background with all the loading texts. The black and white screen.
View 9 Replies View RelatedThe screen that with the background pic at below is it call splash screen?
How to change the screen at above to text based that shows what services have been started, and if the service has been started, it will show ok at the right side.
I installed 10.04 on my Toshiba laptop, but for some reason there is no violet splash screen with the "Ubuntu" word when the system is loading. Instead there is a bald dash in the upper left corner that keeps blinking and then it is changed by regular font dash, then there are some letters (like system is checking something?) and that's it, one second after my desktop welcomes me. What could be the problem? I feel like I haven't had such a problem when I was installing it on another computer. Though it might be because I am installing from USB drive, but not, installed from CD with the image recorded and still the same problem.
View 2 Replies View RelatedI want to set a different splash screen instead of the one that shows up just before and just after I log in (Ubuntu and the loading bar)
I installed gnome-splashschreen-manager and through that I set the splash screen to another jpg image but this doesnt seem to work. I dint see any difference after rebooting. Am I doing something wrong in GNOME Splash Screen Preferences? This method seemed really straight forward.
I am a new Ubuntu user and am looking to make my screen look more like a mac. Is there any possible way to change the splash screen? I keep reading about ways but they don't work on my distro. I am using 9.10.
View 2 Replies View RelatedI installed the beta version of Ubuntu 10.4, and on top of that Ubuntu Studio (for the programs it brings with it); but don't like the splash screen.
How do I disable it? (I tried uninstalling the Ubuntu studio desktop, but it did not remove the splash screen).
*Edit, following Ubuntu studio apps are still installed on my system:
Code:
ubuntustudio-default-settings ubuntustudio-screensaver
ubuntustudio-icon-theme ubuntustudio-sounds
ubuntustudio-look ubuntustudio-theme
ubuntustudio-menu ubuntustudio-wallpapers
I updated from 9.10 karmic to 10.04 LTS. Everything worked fine until, I restarted. Upon logout there are no splash screen like I had before in the 9.10, and my fan on my gfx are going crazy, spining at 100%. Well then I got to the grub loader, and discovered my boot splash was gone to. The only thing which is displayed on the screen are: mount dev /dev failed device71 Starting up. Then 10 seconds later alot of texts shows up and I get the login screen. I've looked around on the forum and other sites for a solution, but with no luck.
View 9 Replies View RelatedSome time ago I installed KDE on my machine, though I use gnome as the default. (I rarely login on KDE) .Since then, when I login in my default gnome I get those futuristic KDE cursors, which I hate by the way. I've been trying to go back to my default cursors but I've had no success. I go to System -> Appearance -> Customize -> Pointer and then I select Default Pointer or even DMZ (white) I click on close twice and nothing happens. I've even removed the "oxygen-cursor-theme" using the package manager. How can I get my default mouse cursors back?
On the same note, before I get the login screen and after clicking on logout/restart I get a Kubuntu blue (splash?) screen, I'd prefer not to get this screen. how to get rid of this, too? (Getting rid of the cursors would be most important, but if I can get rid of this screen it'd be nice, too)
I wanted to try KDE, Because I havent really given it a chance since 3.5.*, but now I seem to be stuck with the kubuntu splashes on startup and shutdown. I want the original Ubuntu ones back, without removing K. I found tutorials from 2006, but I'm hesitant to use them. anyone know how to get it done on the new plymouth setup that 10.04 has?
View 2 Replies View RelatedI recently installed from scratch the Lucid Lynx, and after changing the direction of the window buttons and a few things more (who was the idiot who thought on having a purple terminal?), I completely loved it.
I had one problem through, is that when I boot my computer, there is no splash shown. After the GRUB menu, all I see is a black terminal with no text for some time, and then a quick view of some colored text. Does anyone else have this problem? Here is the appropriate section of the grub.cfg file:
Code:
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
[Code].....
I just installed Kubuntu 10.04 on my Desktop computer. Prior to KDM loading, all I get is a blank, black screen with no Plymouth splash screen. I'm confident that this issue is not related to KDE but would apply to all Ubuntu variants. Here are my computer specs:
Kubuntu 10.04 x64 running with all updates
Dell Studio Desktop
Intel Quad-Core Processor 2.66Ghz
8GB ram
Intel Integrated Graphics
I should note that I have full desktop effects running smoothly under KDE with compositing enabled, so my integrated graphics is not necessarily the problem unless Plymouth is not loading the graphics drivers successfully.
I have poured over many forums and countless posts on how to do this and i cant seem to get it,i have been trying for the past 8 hrs to change the splash screen in my ubuntu 10.04 lts lucid lynx,i have installed startup manager and splash screen and have tried using those to edit my splash screen to no avail i have no idea what im doing wrong
View 2 Replies View Relatedhow do you change the splash screen? i.ve looked all over the internet but common sense tells me to just ask on here.
View 9 Replies View RelatedI finally broke down and upgraded to Lucid since Intrepid reached "end of life", but I liked Intrepid's Ubuntu startup splash screen much better. Is there any way to get that back in Lucid?
View 1 Replies View Related