i want to install oscar cluster on my ubuntu 8.04 , so i added its repository from http://svn.oscar.openclustergroup.or...ki/repoTesting .i added repo from Testing the development version section.when i use oscar-config --bootstrap i receive this error :
Initializing ODA: mysql
ERROR: Unknown ODA type ()
at /usr/bin/oda line 886[code]....
i must mention that i have mysql database .
I am working in a project that needs to set up an Apache Web Cluster. The cluster needs to be High-availability (HA) cluster and Load-balancing cluster. Someone mentioned the use of Red Hat Cluster Suite, but, honestly, I can't figure out how it works, I haven't been able to configure it correctly. The project currently have two nodes, but we need to support at least three nodes in the cluster.
View 5 Replies View RelatedI am trying to build GFS2 cluster with 2 or 3 Fedora 14 nodes, but I've encountered some problems from the start. First luci does not work at all in Fedora 14. There is no luci_admin and even if I manage to start luci service, I get a blank white screen when I try to open it from the browser. I've googled a bit and found that I'd might be able to setup GFS if I manage to build cluster.conf manually and start the cluster suite, but I cannot find documentation on how to create cluster.conf anywhere. If anyone knows how to setup GFS2 without a cluster suite or how to configure cluster.conf.
View 9 Replies View RelatedI'm trying to build a Fedora 12 cluster to run DHCP on top of two servers using pacemaker and drbd. The pacemaker runs great but i'm having the hardest time getting DRBD installed.
My kernel version is 2.6.32.11-99.fc12.i686.PAE First i tried to [root@dhcp-primary drbd]#yum install drbd this doesn't give me everything because apparently the kernel module for DRBD must be built from source. so i unpacked drbd-8.3.6.tar.gz and tried :
[Code]...
I'm not very experienced in compiling from source i'd love to make an rpm for this but after scouring the web and trying different install methods, I am still at a loss.
I´m having some problems with opkg-rapt in oscar installation.When I execute "oscar-config --bootstrap", the following error appears:
Error occured while running "apt-get update 1>/dev/null 2>/dev/null" (25600) at /usr/bin/rapt line 1281.
Error during execution 6400
[code]....
With the new realease of Ubuntu 10.04 LTS, I was wondering if there was going to be a package for installing Mysql Cluster Server 7.1
If not does anyone know of a good walkthrough for compiling and installing it in Ubuntu 10.04 LTS?
I am currently trying to setup a cluster using heartbeat. Unfortunatly it does not do what I want to do. I am using heartbeat 2.1.4-11 on a readhat system. I am using the the cib for configuration. What I want to do is the following: I have two Nodes. I want to run a clone resource on both nodes. It's named I want to run as a clone. This works fine.Additionally I want to have two virtual IP adresses. One should be set on Node 1 the other on Node 2. This works fine as well. I want to set dependencies between the resources. And this is where I have problems. What I want to achive: In case named is not able to run on a node, the vIP should switch to the other node (which then will have both vIPs). In case both nodes are able to run named, there should be one vIP on each node. Sounds simple, but does not work.Accourding to the heartbeat docu this an be achieved by using
[Code]...
I have two machines fairly decent which I wish to cluster and run a vm (preferred choice virtualbox) on it, if possible with load balance.
View 1 Replies View RelatedI'm a Linux n00b (very fluent in Windows, though ) that is attempting to set up a (currently) 3-computer cluster. My server node is a Pentium 4, and my client nodes are a Pentium 4 and a Pentium 3 (whatever I have lying around ) I chose to use OSCAR for my clustering interface and CentOS 5 for my server node OS. Yay. I made it through the installation prerequisites, but when it came to configure the NIC, I got stuck.
I opened the /etc/hosts file, tinkered with it, but something inevitably got screwed up. I can still use the Internet, but it won't let me install OSCAR. Running a system-sanity check returns:
Code:
[root@SurgeonfishR ~]# system-sanity
Checking your system...
Success: ssh-check.pl
Success: tftpboot-check.pl
Success: selinux-check.pl
[Code]...
All I need to know is what the /etc/hosts file should look like for a CentOS 5.4 installation with 1 NIC that is not connected to a domain (only a LAN). It is connected to a router which in turn is connected to my home network (I don't know what to do about that). The hostname should be surgeonfishr and the IP address should be 192.168.0.150.
I know this question is probably really stupid, but I've logged a total of about 10 hours time on Linux...ever. (And 35000 hours on Windows.)
Has anyone ever installed an Ubuntu server version on an IBM cluster (HS20 and JS20 blades)?
View 2 Replies View RelatedI'm having a very strange problem with red hat cluster. After testing it in the lab, I tried to install a new cluster and received the following error: cman not started: Cannot start, cluster name is too long or other CCS error /usr/sbin/cman_tool: aisexec daemon didn't start I've checked the internet for that error, but nothing. I decided to to take the example from cluster.conf man, which looks like that :
[Code]...
And still I get the same error. I can find my servers both from DNS (FQDN and short name) and they also appear in /etc/hosts.
I need to setup an linux cluster ..so i prefer ubuntu because of support and i personally i use ubuntu.. and can any one explain in breif ..what all the things needed to setup an ubuntu based cluster my configuration for each node will be (totally 6 nodes) core2 duo with 4 gb ram i need 4 nodes and 2 for load balancing..
View 1 Replies View RelatedI trying to create a Cluster Linux with two servers and one storage, I have mounted some filesystems in both servers, but, when I create a file on server (1), I don't see the file on server (2).
Is that a problem with the linux or storage configuration ?.
I want to set up a cluster for scientific computing (mainly statistical stuff with R). I have a few conceptual questions. First, is there a difference between a Beowulf cluster and a cluster that has single-system image ("SSI," e.g. using openSSI or LinuxPMI)? If so, what's the difference? Second, if there is a difference between Beowulf and SSI, which one is better for scientific computing? Third, does using Eucalyptus make sense for scientific computing or is this more suitable for IO-oriented operations such as web service or databases
View 2 Replies View RelatedCan ANYONE point me in the right direction on how to use storage on multiple servers as a single cluster?I thought storage cluster was for that but, after much googling, and even more help from here, I don't think that achieves my goal. My goal is to have multiple servers share a file system, to act as somewhat of a network raid, so if node-A goes down the files are available on other nodes, and hopefully so when the capacity of the nodes are reached I can add nodes to expand the "cluster".
View 6 Replies View RelatedI've been reading up on clustering a bit and want to create simple 2 machine cluster of which the 2nd one will turn on and take over traffic at the previous machine's IP (I'm aware there will be a couple minutes of downtime while the failover server boots). I've looked into doing a simple DNS round robin, but I think both machines would need to be online all the time for this to function correctly. I've also looked into linux-HA and GlusterFS but both seem a little intense for the simple failover I'm trying to achieve. One catch if approaching with DNS round robin... the server that I want to setup with a failover also operates as a DNS server. Anyone know the simplest way to complete this? One idea I had (that seemed like a bit of manual work): Create script that runs every 60 secs through CRON on firewall (running pfsense) and have it check if master-server is up. If it's not, it will send a WOL signal to the slave, which has a mirrored image of the first. the problem I have with that is I will also need to create a script to keep both synced properly which seems almost impossible if one is shut down until failover (my thought was periodic rsyncs.) Perhaps creating a FS to direct all files to for the master/slave would be the only way around that.
View 1 Replies View RelatedI need to build a 3 node web server cluster to run a php application. Since the app requires users to login (which means a session state is to be maintained), I will be sharing sessions save path, I also need to share the application directory across 3 nodes. I having trouble deciding which cluster file system to select.
View 5 Replies View RelatedI am trying to install a Red Hat cluster on my servers. In order to configure an heart bit between the servers I must give a valid multicast address. I wanted to know if there is a way to validate a multicast address before using it. For example if it is already in use i don't want to use it.
I read a little about it and there is a Perl module called IO::Socket::Multicast: [URL] There is a tool called mcasttrest.pl: [URL] Oracle use it to test multicast. But I am not sure what will do the trick in Red Hat cluster.
configure a separate NIC for the heartbeat. what i need to add to cluster.conf to achieve this?
View 1 Replies View RelatedI am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:-
1) insert-ethers
2) client is started with the PXE boot.
3) it detects the dhcp .
4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:-
/export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
I was wondering if and how it would be possible to put together a sort of Home "cluster" system. pecifically, I wanted to make it so I would have a central server and a few computers, where the central server holds the home folders and settings of each user, and each user can log in to any of the computers using a standardized login (into the server), where anyone could log in with their account on any of the few computers - and their home folder (Desktop, Documents, Music, etc) would automatically be there.
Also if possible, would there be some way to centralize the applications that show up on each "client"?
I have a netbook that has a dead windows partition. I've installed ubuntu and have never tried to recover the dead windows installation. However, I now need that space in the main partition. I ran the liveUSB of ubuntu and ran gparted. I have an error on that partition.
Accounting clusters...
cluster accounting failed at 66892 (0x1054c): Missing cluster in $bitmap
Cluster accounting failed at 489569 (0x77861): extra cluster in...
I think I may have attempted to resize this and I got this error. I cannot get into windows to fix anything, so I can't run scan disk or fix disk etc. I'm not sure if I can get a command prompt. I don't have a CD drive. Can I reinstall linux and use the entire hard drive? Will it do this, or will the cluster errors prevent this? Can I fix this so to resize the windows partition?
I just wanna simulate HPC and and other kinds of clusters in VMware workstation 7.0 , in my HP 520 laptop which is dualcore and 3Gb RAM. So can u please help me out regarding this.. I am interested to work in clusters. I am new to this hpc and other clusters..please can any one gve me document on cluster installation and configuration. I would be grateful to them.. I am using Centos OS.
View 4 Replies View RelatedI have searched and read lots of document but i couldn't exactly I wonder does anyone made up a beowulf cluster especially on ubuntu 10.04 and how can i do?
View 14 Replies View RelatedI've looked all over the web, but don't see an answer to my particular case. I'm in GParted in Ubuntu Live CD 9.10 amdx64 To prep for Ubuntu install, I'm attempting to resize and re-partition my second hard drive which was FORMERLY my primary boot drive for Vista before it crashed a few days back. It is CURRENTLY my Vista User data file and is about 250Gb in size. The drive is a SATA 500Gb total.
But GParted now all of a sudden gives me several "Cluster accounting failed at blah blah: missing cluster in $Bitmap" error messages. Is there a good way to 'fix' these errors? (besides reformatting it) I deleted the long-winded background, so let me know if you need more info. Short version: I installed vista by reformatting my 120Gb data drive as the primary master now. Then I plugged in my 'previous' 500Gb Sata drive, and pointed Window's User folder to my old User folder, and voila, was back up and running in Vista... minus all my programs. but now, both drives are recognized by GParted as "boot" drives.
If I was to set up a Cluster, I know it wouldn't make much difference to loading up my browser, but would all heavy duty programs (Video Encoders mainly) work with it, or would I need to use programs specifically designed for cluster use?
View 1 Replies View RelatedDoes anyone have any experience with clustering KVM? I know how to do this for Xen, but I would like to know if it can also be accomplished with KVM. I am looking for a solution that is not specific for a distro.
View 3 Replies View RelatedCan a Cluster, made up of 5 Dell Poweredge computers, each with a NIC and a HDD, be a file-server that is highly available? If I go over, and break one of the computers with a sledgehammer, will the cluster continue to operate without data loss?Goes on to say how fancy the cluster is,
View 3 Replies View RelatedI am bit curious about Cluster Computing. I don't know much about it.Here is Some thing which I wanted to know.1) How can I configure fedora for Cluster computing .2) Is it possible to connect computer of different configuration(like AMD + Intel )? and also for different architecture ( like i386 + x86_64 ) for cluster computing.
View 7 Replies View RelatedI have a very small network (5 computer) for cluster. One of them is master host and has 2 eth (eth0 and eth1). Eth0 is connected to local cluster lan switch and eth1 is connected to internet, eth1 should have a valid IP address. Cluster is okey and work good, but when I assign ip address to eth1, both of theme don't work. cluster goes down and I cant use internet. Ping my cluster node and 4.2.2.4 say the eth not work.
View 8 Replies View Related