I'm trying to set up a virtual web server using virtual pc and a net-tuts how to. So I went ahead and downloaded Ubuntu 9.10 Server Edition, but it only comes in 64-bit, and vpc doesn't handle 64-bit. How I can get around this? I have a machine that I could set up as a server, but that is also only 32-bit.
View 6 Repliessince upgrading to Fedora 11 I keep getting this error:
Code:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000041
IP: [<ffffffffa01fab94>] sync_request+0x1/0x8de [raid456]
PGD 49435067 PUD 494f6067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/devices/virtual/block/md0/md/sync_speed
CPU 0
Modules linked in: ip6table_filter ip6_tables ip6t_REJECT nf_conntrack_ipv6
[Code]...
I got my hands on a couple old servers. An HP tc2021 and a Proliant ML110. Sure they're ancient, but I thought they would make a couple of great Ubuntu Servers for a new "start up" business I'm trying out. Now I've got to decide the best scenario to distribute the load between the two servers. I'm going to make an internal domain and will probably be running the following: Kerberos, Samba, Apache, Postfix, mysql, bind, dhcp, SVN, GCC, and Nagios. So in summary, I'll have the following roles; domain controller, web server, file server, and network monitoring services. how they would handle splitting these services up between two servers?
View 1 Replies View Relatedi would like to know how many connections per sec/min/hour, xampp can handle. I'm going to run SMF forum on my box, because i'm not ready yet with real server solution. System stats are: G31M-S2C; 2x2GB Kingston@920Mhz; E5200@3500Mhz; 500GB@7200 Seagate, all powered by Lucid x64. In a time i will migrate to a quad, mobo with raid support, etc. but at that point i'm want to know how much connections can xampp handle. Because of the forum nature, i think of auto deleting topics witn no new replys in 5 days for saving place (there will be minimum 1 and maybe max 5 photos per thread, maximum size 2Mb for each).
View 4 Replies View RelatedI have been plagued by this for some time. How many times do you need to run chown -R user:www-data or similar to your webroot directory.I have been searching via Google and this forum. I have yet to find a definite answer to handle uploading and creating new files usable by apache2.Scenarios can vary. Some folks put there webroot inside a /home directory. Some users leave the default location as /var/www.I have a two part question.. Why do I often read "Apache runs as user=www-data, therefore files need to be readable by such (www-data)", but the default install in Ubuntu includes an index.html with the following?
Code:
ls -l /var/www
total 4
[code]....
How do clients handle offline syslog servers?Will the log files be buffered locally to be sent to the syslog server when it comes back online, or will any log data generated during downtime be lost in cyber space?
View 1 Replies View RelatedA FC10 server hung and had to be power-cycled. I suspect it hung because of an nfs mount timeout.
Now it does not boot. The error is libc.so.6 not found. Kernel panic. Attempting to kill init.
Booting under rescue:
ls: cannot access libc-2.8.so: Stale NFS file handle
Is there a way to reboot to a clean state? There must be some NFS cache file.
I also tried to cp rescueCD:/lib64/libc-2.8.so to the old lib64 dir, but get the same "Stale NFS file handle" message.
[Note: I'm typing this entire thing out. It probably isn't 100% verbatim. And I am using an older version of the kernel because 2.6.30.9.96 was not behaving either.]
Code:
BUG: unable to handle kernel paging request at efd86f5c
*pde = 00000000
[code]....
I'm using a Intel mac pro running Ubuntu Server 10.4 64bit, and I have it working. Currently, I'm just using Ubuntu using bootcamp, and not using EFI. The OS drive is 250gb which I know is more than enough, but it was what I had free at the time. I added 3 1tb drives to the computer, but not sure how to create a raid with them. I've done some searching, but still haven't been able to get it done successfully.
View 3 Replies View Relatedbeen trying to get a spare computer up and running with 10.10 server 64bit no dice so far, after hours of memchecks, disk checksums, re-burns and whatnot..install stops at 73% and does f. all.. tail log shows that it stops at updating sources, alt+f2 and ps aux shows apt-get update process running. if I kill this process, I can continue with the installation, but for this I need to repeat same process - killing all the apt instances that show up - so that it can complete the install. Unacceptable imho. computer is a AMD cpu based, athlon 2 435 on an ASUS M4A89TD PRO mainboard. ddr3 4gb crucial ram sticks. drives are functional S-ATA. No external GPU, so using IGP.
Tried installing without eth-cable plugged in, with it plugged in, with a usb install (that sorry excuse for an install was even worse, "please insert cd" midway) I know I can get the install going with desktop version.. But why would I want an xserver running on a headless computer. Kind of pissed atm, spent so many hours at this, figuring it just might be a faulty HW item. It isn't. using 10.10 desktop on my laptop and production pc - and been using 8.04 as main server, until now...
Edit: another one of them optiarc sony nec **** for brains dvd/cd-rom/writer it seems. add a check for this in future releases, with big bold letters "YOU ARE SCREWED, BUY NEW HARDWARE" printed as soon as the cd loads in these drives.. I've got better things to spend my time on than staring at a screen trying to figure out why it won't load properly
I've got a problem with installing 64bit systems on Virtual Box. It is reporting that my 64 bit virtualization abilities (something like v-AMD or so) are present but not enabled. There is also an advice to enable it in the bios but I can't find anything like this actually. My motherboard is Asus M4A88TD-M EVO with quad-core AMD processor. IS there any trick to enable this feature somewhere in the system or it is a limitation of my hardware?
View 4 Replies View RelatedCurrently using Ubuntu9.10 Desktop 64bit. I want to remotely login into this Ubuntu pc Gnome Desktop from my office Windows PC with a separate user and one particular application assigned to this user ID.
View 3 Replies View RelatedIs is possible to install Ubuntu Server 10.04 on USB Flash (pendrive) ?
I'm wondering could i create small dedicated server without hard drive.
I don't need high speed on "" drive.
I think i could mount home and all user data by NFS or iSCSI.
But question is about putting that on flash storage...
Any easy way to install in on pendrive ?
i am trying to install ubuntu server 10.4 on a fujitsu siemens x300 s2, but when it comes to dectcting the hard disk it cant find them. it says i have to load the scsi drivers. i have gone threw the list that appears on the list but none work.
View 2 Replies View RelatedI got a xend start problem when I install xen 4.0.1 on ubuntu 10.04 64_bit my installation steps are as follows:
first, install packages$sudo apt-get install bcc bin86 gawk bridge-utils iproute libcurl3 libcurl4-openssl-dev bzip2 module-init-tools transfig tgif texinfo texlive-latex-base texlive-latex-recommended texlive-fonts-extra texlive-fonts-recommended pciutils-dev mercurial build-essential make gcc libc6-dev zlib1g-dev python python-dev python-twisted libncurses5-dev patch libvncserver-dev libsdl1.2-dev libjpeg62-dev iasl libbz2-dev e2fslibs-dev git-core uuid-dev ocaml libx11-dev bison flex
[code]....
Debian 8 64bit
network -> wifi -> wifi settings -> settings -> ipv4 -> dns
If you want to set google dns 8.8.8.8 8.8.4.4 you enter 8.8.8.8 in the server box and add a server and enter 8.8.4.4?
Can I verify that google dns has been set?
I have had no problem installing Fedora OS on any of my Dell servers prior to this post. Anyway, I wouldn't call this a problem but recently, we bought another DELL server with Quad Core, 4GB, etc... AND this model has 2 swappable SAS Harddrives.
I wouldn't call myself an expert but then again I am not a newbie too. However, I have never setup any RAID before and now I am forced to setup RAID1 on this server. So, in a way, I am a newbie in setting up RAID
Would someone please point me in the right direction as I have no idea what I am supposed to do to setup the RAID. FYI, I will be installing Fedora 10 64bit on this server. I would appreciate if you can start from the very beginning, ie. partitioning, formatting the harddrives during OS installation, etc..
I have a client with a pair of Supermicro 6025B-T servers that he wants to have Ubuntu 10.10 64bit Server running on for VM/Cloud experimenting. He needs these to be set up RAID 10. I can go into the Adaptec utility and make the array and make it bootable and get to the point in the installer where it asks me if I want to use the SATA array - then it gets to the partitioning screen and the array is nowhere to be found.
View 1 Replies View RelatedI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedDownloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?
does anyone know where I can find libcrypto.so.6()(64bit) and libssl.so.6()(64bit) for Redhat 6 - based distributions?
View 6 Replies View RelatedEdit: now working, thanks very much Leigh and Dangermouse.
Anyone successfully installed AIR and iPlayer on F11?
I've switched to 32 bit Adobe flash, tried Autoten for AIR and Dangermouse's advice for iPlayer: url.html but it's not working, and trying to install AIR from url results in an endless busy downloading graphic .
I assume my problem is a lack of required packages, though I searched the repositories using YUM extender for the packages listed here: url.html and can't see them either as installed or available.
I want to install IBM Lotus Symphony on my 64 bit system, but yum only finds 32 bit version.
View 14 Replies View Relatedi have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
As i just started to write scripts, i'd obviously like automize some actions, therefor i'd like to check the users system if its 64bit. Is there a function to check this?
were's a good start to get into bash scripting, the files i use as template gave pretty much good info, but yet i have no idea what i'm actualy doing