I have just installed Ubuntu on a server at work.Now I need a easy to set up (preferable GUI) backup program witch support tape drives, and can send e-mail reports.Is there any in the repertories?
View 4 RepliesI am a Ubuntu 10.04 Desktop user.
I am searching for a backup software to backup to my hp dat72 tape drive. It is only to backup my data from 1 PC.
I have already found bacula but it seems to big for my purpose. I need an easy and automatic software.
Could you recommend a backup software for my needs?
How many times should a backup tape be used before being discarded? i cant find an answer for this question does anyone know, I'm thinking 1 but i have almost no knowledge on tape backup so i could be dead wrong.
View 3 Replies View RelatedI am running Ubuntu 10.04, and i recently purchased an tandberg LTO-4 SAS tape drive. I want to access it and backup data on it. Do I simply just connect plug it into the server,and I should be able to backup/transfer data to the tape drive? Or are there intermediate steps before I can do that. Here are some results from commands that I have typed:
Quote:
ls /dev/tape/
by-id
Quote:
ls -lt /dev/tape/by-id/
total 0
lrwxrwxrwx 1 root root 9 2011-02-25 14:54 scsi-3500110a00145553e -> ../../st0
lrwxrwxrwx 1 root root 10 2011-02-25 14:54 scsi-3500110a00145553e-nst -> ../../nst0
[code]....
i have centos 5.9 running on my server and i have to take backup of my entire data from the different server.This one I want to make it as backup server. I need few informations about the tap drive
1.Which tape drive is good also compatible with Linux (centos ), pls send me the link
2.How to take backup into tape drive , good if you send any doc.
3. Any backup software which is kind of opensource
I am setting up a tape drive back up, but I am having "fun" with bacula configuration. Basically the drive is working , I ran the test with the btape program and all was correct. I am basically meddled up with the jargon and the very large bacula documentation. I created some 2 volumes and gave the mounted the tapedrive (labeled) the name of one of them "tapevol2" .... now I can not relabel the tape, I deleted the volume "tapevol2" but still the tape drive is mounted with that name, even though the volume is deleted. If I add ( create more volumes) I can not make the tape to mount with anything different that "tapevol2". I would like to go back to zero and delete all volumes, and mount the tape with one of the newly created volumes, so the jobs back up can run.
View 2 Replies View Relatedwe have a server that runs a backup (cron job) at 9:15 every night. When I log on in the morning I have mail message that gives me a long list of all the files that were backed up the night before. For a couple of weeks now, the mail message gives me an empty list. Yet, when I run the same job manually from a #prompt, it runs. I am not able to run this job with cron in the daytime because too many users are in it. I wanted to browse the tape to see if the backup is really failing to copy the files or if they are on the tape and the mail message is bogus.
Since the backkup was done with cpio instead of tar, I'm not sure if I can browse the tape with restore -i anyway.What would be the best way to browse the tape on /dev/rmt/1 without actually restoring anything ?This is an ancient DGUX system, not Linux, and I'm not a unix expert I just inherited this server recently, but a lot of things are very similar to Linux and it looked like this might be a good place to ask.
Currently I have bacula backing up the contents of my server on a daily basis (Mon-Fri) on to a tape. There are in total 9 backup tapes so far. One for each day of the week (Mon-Thurs) and one for every Friday in the month (so there are 5 friday tapes). The tapes are all from the same pool and once the tapes are full they should then get recycled. As I understand and from what I have seen, the data from my server backups up to the tape and is then marked with the append status. Every time that tape is used, data is then appended onto the tape until the tape is full. At this point it is marked as full but wont be recycled until all the tapes from the pool are marked as full (so until all 9 tapes are full).
My question is, is there a way of overwriting the data on the next backup on the tape, rather than appending or requiring that all tapes in a pool are full before a tape can be recycled. As the mon-thurs tapes currently cant be recycled until all the Friday tapes have been used. The reason why I dont have seperate pools for the Friday backups and the other days of the week or even seperate pools for each day of the week, is that if a tape is accidently not changed or someone puts in the incorrect tape by accident a backup will still occur. Which is better than no backup!
I have s script that standard users use to back up usb drives to lto4 tapes.it asks for a JobNumber and sends an email upon success.I recently expanded it to use Multiple tapes.my specific Q is if the system reaches the end of the tape it happily mentions in the terminal that one needs to put in a second tape.what i would like to do is send an email that --It needs a second tape.( it presently sends an email upon successful compleation - so you see the only way a person knows that they need a second tape is if they
1-- know that the drive they are backing up is < 800GB (lto4)
2-- they do not get a completion emails and the think to walk to the basement and see the request for a second tape.
I wish for an email that would tap them on the shoulder that : " you need to put in a second tape "so -- if i know the exact syntax that shows in the terminal - which is:Prepare volume #2 for `/dev/st0' and hit return:then can i test for that somehow?
I'm trying to use wget to retrieve some data from our tape backup utility (HP Command View 1/8 G2 Autoloader). The URL requires two parameters for the info I want to retrieve. I have searched for a few hours and have tried numerous combinations to get the data but the parameters aren't being executed. I have escaped the URL as well.
Code:
wget --user=x --password=x --recursive --no-clobber --page-requisites --html-extension --convert-links --no-parent -O ssi.html "10.0.x.x/inventory_status.ssi?mag_0=1&mag_1=1"
returns:
Code:
<HTML><HEAD><TITLE></TITLE></HEAD><BODY>
<SCRIPT LANGUAGE="javascript">
top.location.href='logout.ssi';
[code]....
I am looking at getting a DLT drive for my network; however, I have never used the tar command with a tape drive. What happens if the data is larger then 1 tape? Does the tar application automatically span tapes or do I need to use switches so it spans multipule tapes? Right now my Full backup will take 2 or 3 tapes.
View 3 Replies View RelatedI've having problems in listing files from a TAPE. I did not create this tape and I'm assuming that the files were successfully backed up to this tape.Some commands that I've tried:
PHP Code:
atenreiro@intranet:~$ sudo mt -f /dev/nst0 status
SCSI 2 tape drive:
[code]...
I have been using an LTO-5 Ultrium-3000 tape drive connected to an ATTO HBA without problem. I can control the tape drive using "mt -f /dev/nst0" and have been able to make successful backups using cpio, tar, and dump/restore. I followed some instructions on the web about how to install the HPE Library and Tape Tools application (version 4.21) which relies on conversion of a rpm to a deb file. The software seems to have been installed correctly and runs. However the hardware scan function does not recognize my tape drive. The following is suggested in the user manual if the tape device is not recognized by the software under Linux:
1. Login as root.
2. Edit the following file:
vi /etc/modules.conf
3. Add the following line as appropriate:
add options scsi_mod max_scsi_luns=128
4. Reboot the computer.
The problem is I don't have an /etc/modules.conf and am not sure exactly which file would be equivalent? If this is even the correct solution.
My tape drive is controllable and functions well using "mt -f /dev/nst0 status" so it seems to be a matter of LT&T software to detect the tape drive.
At the risk of providing too much info here some, possibly relevant, output from lshw
*-pci:3
description: PCI bridge
product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: b5
[Code] .....
I want to know how to retrival partial files from a lto 4 tape instead of retrieving the complete tape.
View 2 Replies View RelatedI have a HP Proliant DL380 G3 server with Ubuntu Server 9.10
I have a HP Storageworks Ultrium 215 tape device
For some reason the Ubuntu server does not find the tape device
I have dell poweredge 830 server with tape drive and RHEL 4 running on it....the issue i am facing is,i am unable to insert the tape as i had ejected the tape forcefully from it....
i tried to do a listing of the contents backedup on tape and it got struck in middle throwing below error,
/dev/st0:device input/output error. after which i was unable to eject the tape using
mt -f /dev/st0 rewoffl
i removed the tape by holding the eject button and now when i try to insert another tape, it's unable to take the tape in to tape drive...
I've tried doing all except reeboting the server, can any one help me out in this issue, hope the blow information may help in debugging the issue... code....
I have a scheduled backup to run on our server at work and since the 7/12/09 it has be making 592k files instead of 10Mb files, In mysql-admin (the GUI tool) I have a stored connection for the user 'backup', the user has select and lock rights on the databases being backed up. I have a backup profile called 'backup_regular' and in the third tab along its scheduled to backup at 2 in the morning every week day. If I look at one of the small backup files generated I see the following:
Code:
-- MySQL Administrator dump 1.4
--
-- ------------------------------------------------------
-- Server version`
[code]....
It seems that MySQL can open and write to the file fine, it just can't dump
I'm having issues with mt commands. For some reason, my server doesn't like backing up directories using tar.
Code:
# tar -czf /dev/st0 /www /home
ends up giving me an error message saying "removing / prefix" and then using the command
Code:
# mt -f /dev/st0 status
gives me an IOCTRL error. I've googled the error code and haven't come up with a viable fix. Thus far, the only way I've been able to check which files are on the tape is:
Code:
# tar -tzf /dev/st0
Of course, without getting the actual directories on the tape in the first place, the only files I've been able to transfer at this point are just singular files within the directories as opposed to the entire directories themselves.
Does anyone know of any decent enterprise level backup solutions for Linux? I need to backup a few servers and a bunch of desktops onto one backup server. Using rsync/tar.gz won't cut it. I need like bi-monthly full HDD backups, and things such as that, with a nice GUI interface to add/remove systems from the backup list. I need basically something similar to CommVault or Veritas. Veritas I've used before but it has its issues, such as leaving 30GB cache files. CommVault, I have no idea how much it is, and if it supports backing up to a hard drive rather than tape.
View 7 Replies View RelatedI currently have a group of 3 servers connected to a local network. One is a web server, one is a mysql server, the other used for a specific function on my site (calculation of soccer matches!).
Anyway, I have been working on the site a lot lately but it is tedious connecting my USB hard drive to each computer and copying the files. This means I am not backing up as often as I should...
I have a laptop connected to this same network that I use for development so I can SSH into to the computers, is there any software for ubuntu that can take backups of files that I choose on multiple computers? I know I could rsync but is there something with more or an GUI?
Then I can just every 2 days move the most recent backup from my laptop to the USB drive. Then I will have the backup stored in 2 places if things go kaboom somewhere.
I have been hassling with this for several days now. I have 64-bit Ubuntu Server 10.04 running on an Acer Aspire EasyStore H340. I have windows 7 running on a 64-bit desktop pc and on a laptop. I mainly wanted to use the Ubuntu server for a file server, so I installed Samba and created three shares. These do show up in Windows explorer, and I can read and write to them. My windows applications seem to be able to see the shares and open & save files.
My next step was to try and set up a backup of the Windows 7 pc to the Ubuntu server. Windows integrated backup sees the shares and sub-directories within the shares, and the initial part of the backup seems to run OK, but when it tries to save an image of the 'C:" drive it works for a long time and then ends with an error (cannot complete backup).
So, I looked for some free backup programs to try, but these do not allow me to select the shares as a destination (invalid destination). The dialogue sees the drives I have mapped the shares to in Windows, but does not show any sub-directories, and selecting the mapped drive letter does not take as a destination. If I try to browse down through "Network" in the destination dialogue, it selects "Network," but does not expand it or accept it as a destination.
So, I partitioned, formatted as ext3, and mounted my 2nd 1TB SATA drive on the server, and mounted it as "storage." I set this up as share in Samba and gave everyone read-write access, but still no luck selecting it for a backup destination. After some Googling, I downloaded and installed Ext2Fsd-0.48 (a windows 'driver' for Ext2/Ext3). This installed correctly, but when I open the program, neither "Network," the shares, or the mapped drives show up anywhere.
Is it possible in dd to use it for the output file to be stored at some remote location.
I do not have free space on the LVM partition whose backup I want to have via dd.
I have a file server running in an office that's mostly used for file sharing and a scanner saves pdf files to the server. I'm running the latest LTS ubuntu server edition and I really only have ssh installed and samba. My question is that I've done so much to the server as far as premissions and configuration and I'd like to make a clone of this to another computer and not sure how I would do this?
I'm not sure if clonezilla or something like this can perform this task? I basically just have a very old computer and now I have another very old computer that I want to make into a spare just incase something happens to the original. Any recommedations on how I would accomplish this?
I am running 8.04 Ubuntu server. Unfortunately a couple of days ago I thought I should upgrade as desktop upgrades usually go without a hitch and are very easy. I forgot that my server is live with a few websites and a radius server set up just the way I need (took painfully long time to figure out). Needless to say the upgrade caused many config file changes and many things stopped working. I panicked since this is a live server so I went straight to the backups to recover my system. I booted from a live CD and copied the entire system overtop the new one.
Everything that needed to work works, however now I get this message in my mail about every 10-20mins:
Subject: Cron <root@IMwebserver> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -r -0 rm
Content-Type: text/plain; charset=ANSI_X3.4-1968
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
xargs: xargs.c:443: main: Assertion `bc_ctl.arg_max <= (131072-204' failed.
Aborted
Googling it, I found that its a problem with findutils. I tried to reinstall findutils with no luck.
My backup script looks like so:
@daily /usr/bin/rdiff-backup --exclude /dev --exclude /tmp --exclude /var/run/cups/cups.sock --exclude /var/log --exclude /mnt --exclude /media --exclude /proc --exclude /sys --exclude /var/cache/apt / /media/removable/BACKUP/rdiff/
How can I fix my system so the above e-mail no longer occurs?
I'm looking for way to automatically backup a few machines to my server. Does anyone know a good guide to set this up? I want it to pull the files from the machines at a certain time every week.
View 6 Replies View Relatedi want to run a postfix server as a backup mx, but anybody knows how can i collect the fist server mails with this one? this is multipop action but how can i do it with dovecot or any other pop collector?
View 1 Replies View RelatedI have a Linux host acting as an ISCSI server for a Windows box. I want to keep an off site backup, so I figure rsync will keep the ISCSI server synced with an offsite Linux host. I understand that Rsync does block level incremental transfer to conserve bandwidth ok, awesome.The trick is, that I also want an archival copy kept. Say I want to go back to a revision of a file from 10 days ago, I need to be able to do that.
I was planning on using Backup Exec, since we currently have a licensed copy. Throw the archives from Backup Exec onto the ISCSI server as well, and have it keep a rotating 30 day backup, or something like that. The issue I see here is that this will be creating a deleting files as it does its daily backup rotation. I'm guessing RSYNC will see these as new files, and likely retransmit everything on a daily basis. The question then becomes, is this assumption correct, or will it still know to do a block level incremental transfer even when file names and such are changing?
I have two shares in total and there are also two external hard drives. The server is used by two different organisations that are not supposed to have access to the data of the other one(at least not as normal users).he script I need should run in the background of the server and when a drive is plugged in, it should check, which organization the drive belongs to, and depending on who the drive belongs to, backup the respective share.When the drive belong to neither, it should just do nothing.Unfortunately, I have no clue about scripting and so this makes writing a script like that, at least for me, impossible.So I wanted to know if somebody could name some good websites for learning to write such a script or give tips.
View 9 Replies View RelatedI support a small business which has an Ubuntu server running as a file server. The server is running Ubuntu 10.4. There is one hard drive which is mounted as /media/hdd. Each night this is backed up to an external USB hard drive mounted as /media/backup. The backup is carried out using the command:
Code:
rsync -av /media/hdd/ /media/backup/
Is there a way to encrypt this back-up so that if the USB hard drive is plugged into another machine it cannot be read?
I want to make a daily backup of my websites from ubuntu server over ftp to another server I own. Backup schedule and process works, the problem is backup restore. Winrar says: The file is corrupt, 7-zip crashes.
Backup archive looks ok (the same size as original folder) and you can also extract it ignoring the error by winrar. But the extracted folder only contains one or two subfolder and one file(usually image) and that's all.
If I try to restore from Webmin it doesn't report any error, and it looks like restore worked. But restored files are nowhere.