I want to install a ShoutCast Server on Ubuntu, but I coudn't decide qualities of the server. I am planning to have 5,000 listeners continuously with 32kbs bit-rate. How would be usage of CPU and RAM ? I have 99MBit bandwidth, I think it is enough.
View 2 RepliesLast weekend i've set up my first headless ubuntu home file server and torrent downloader with ubuntu 9.10.Very cool but CPU is way too fast for a home server: P4 HT 2.8Ghz, unfortunatly it has only 256Mb of ram, so no X server and no VNC (old HP office pc) At the moment memory usage is only 40Mb without X server. Besides SSH works just fine Few questions i can't seem to find answers to on google:What is a good CL network monitoring program?mething similar to htopUbuntu 9.10 has a lot, about 20-30, console-kit deamon instanses running after boot each using some memory that i can't spare.
View 2 Replies View RelatedWe liked the idea to broadcast-stream live for our fellow students. Firstly we thought to start with music and then continue with interviews. If we cannot make it live, then we can play a recorded interview.
As I saw, both are playing with winamp for windows. Is there something helpful for playing with openSUSE (or linux in general)?
You'll tell me that most of my friends use windows, why now use their? I just wanted to make it open source and try to play some CC music first (like jamendo).
I was wondering why after a couple of days of my ubuntu server running, that it goes from starting off at 94mb of ram usage all the way up to 498mb of ram usage?
View 2 Replies View RelatedRecently our houses internet usage has skyrocketed and i'm trying to keep an eye on it using bandwidthd (installed on the server). It installed fine and counts traffic fine, the problem is we have a server that hosts our music/movies/etc and when people pull music off the server it skews their bandwidth usage. I'm looking for a way to exclude all traffic on the local network and only count internet traffic. This is the filtering part of the config file
[Code]...
I have just installed shoutcast server on my linux centos5 server and i know the command to start the server is ./sc_serv but what is the command to stop the server ?
View 1 Replies View RelatedI'm trying to connect idjc to a shoutcast server which is running on a web server (i'm not trying to use a local instance of shoutcast), while idjc is running on my computer.
In the sc_serv.conf file as SrcIP I use ANY, cause I thought I was trying to access the server from another machine.
idjc gives me this output (in a terminal) when I try to connect with the web server code...
I have been using Ubuntu for almost one year or so. I use to have a good experience with it. But, since last few days I have been experiencing something nuance with my Ubuntu and most particularly the Exaile player. It use to connect to the Shoutcast server fine. But, these days I can't connect it. Everytime I try to connect it; it shows the message, "Error connecting shoutcast server". I have tried reinstalling it along with the normal plugins that use to work fine. But nothing seems working.
View 7 Replies View Relatedhow to setup shoutcast to automatically start when i start my server?
i have installed it on /root/shoutcast ; configuration file /root/shoutcast/shoutcast_config
I've come across a really strange issue with one of my RHEL servers. The "free" command shows that 7019 MB of memory are actually in use by my system, but when summing up the actual usage (or even virtual usage like the example below) it doesn't add up - the sum is far less than what is reported by "free":
Code:
[root@server1 ~]# free -m
total used free shared buffers cached
Mem: 12011 7946 4065 0 4 23
-/+ buffers/cache: 7919 4092
[code]....
i am learning to using ubuntu as my server and learning using vps too
now i getting consfuse about my server memory usage i just have 3 sites , 1 blog site and 2 company profile but apache memory usage is more than 300MB and total of memory use in my server is more than 500 MB (maximum 512MB burst memory)
i am using drupal for my website is this normal ? because in last week, memory consumption in my server no more than 380 MB
i have a pc that is set up as a torrent slave / file server and media pc i want to set i up so that is goes in to suspend when there is no need for it to be on. I wnat it to wake at a set time to run a cron script for me, to check if there are any new torrents out, if there are , download an seed to till rtorrent auto stops the seeding (for me thats set at 1:1), then go back in to standby mode, if there are no active downloads then i want it to go back in to standby straight away.
as its also used as a file server, is there any way to have the shares still visable, with the pc in stand by, then when a user accesses it wake up the server, and if there is no activity after a set time out then go back in to standby. i would also like it to wol when i try to ssh in to it as a htpc is runns moovida, i would also like it to only go in to standby mode if i am not playing a video.
Is there something which can act as a fully fledged proxy (exactly like squid) but which can also monitor data usage?
At the moment what I do is I log data usage of IP addresses (allocated by DHCP) by using IPFM. Obviously getting a new IP address from a DHCP server isn't hard and this could be abused.
So I was thinking if I require proxy authentication and log usage that way, there is no way for anyone to abuse the system.
Does anyone know of a proxy server capable of logging data usage?
I am running latest apache2 available in the lucid repos on my desktop. All packages are updated as of this moment. Now in the root of my web server I have placed several soft links that point to folders on another ext3/ntfs partitions on the same disk. When I try to download any large file (say above 500M)on this server using firefox, when the 'save' window appears, my desktop freezes, I notice very high cpu-ram-disk usage, even though I have not yet clicked on 'ok' to save the file. This issue is not present when the file size is small. Note that firefox and the webserver are running on the same computer.
Also I have tried nginx and lighttpd and the issue is present there as well. When I tried downloading the same files using Internet Explorer 6.0 using a XP VM the issue is not present. However on Windows as well using Firefox the issue recurs.
I am playing with my new 5 disk 2TB software RAID 5 setup and after I had a hard drop out, I deleted the RAID set and recreated it with only 4 drives. I am working on getting the other drive included by doing a grow. (I hope)
The RAID is now rebuilding and seems to average a write speed of around 87 meg/sec, with lows in the high 60's to highs in the mid 90's but mostly in the higher 80's. But it is only showing about 16% CPU usage and maybe a second usage of around 7%.
Is this normal? It seems low to me, but it is a a quad core 2.5 GHZ processor. Screen shots attached.Is it "normal" for software RAID to drop a drive? I thought that was only a hardware RAID issue. Coder68
I've just installed ubuntu 10.04 and the message text that shows when you ssh in shows the disk usage of /home.How do I get it to show the disk usage of the entire root / instead? (like it used to on some older version of ubuntu)
View 1 Replies View RelatedI'm monitoring all kind of things like ( Mem, network, cpu, IOPS,..) But still not found a command where i can see the CPU usage but in MHZ ( or Hz). Using top or looking into /proc/cpuinfo doesn't give me the info i want.
View 4 Replies View RelatedI'm deploying new ubuntu server which should act as a router. I've already set up the NAT for local network, and also did some shaping for different groups of users, but now I'm facing new problem.I need to make a scheduled URL filter. I know it's not a problem with cron and simple script, but maybe there is existing way to do that? And also, I need to make statistics on web-traffic. I need to have list of URLs visited by users (source ip, destination url). Is it possible with iptables? or with any other software but without using proxy servers.
View 9 Replies View Relatedtop says there's only 12MB free (out of 1GB), but I can't figure out what's using all the RAM. rtorrent is using 13MB, and the rest are in bytes. (ran top as root)
[Code]...
Having major problems with mysqld causing CPU usage to rocket to 100% on one core for a short time, which usually drops back down again to 1-7%, though sometimes it can last an extended period of time. This is a problem because things using mysql become unresponsive in this time.
[Code]...
Is anyone here fluent with the usage of the .htaccess file? Is it the way to go to deter search bots or is there a better method? Never mind. I already have a thread about .htaccess here.
View 1 Replies View RelatedI am running Ubuntu 8.04LTS x64 on a Dell Poweredge 1900 with a Perc 5i RAID Controller. There are 3 500Gb SAS drives in a RAID 5 configuration. The Kernel is Linux dtpfs 2.6.24-27-server #1 SMP Wed Jan 27 23:39:33 UTC 2010 x86_64 GNU/Linux Approximately once every 1 - 2 months I have a problem where the disk usage starts to rise for no apparent reason. When I run df the usage grows steadily over 2-3 days from 26% to 100%. At this point Samba reports that the disks are full. Baobab does not report the additional usage and the tape backup ignores the 'extra' usage and just backs up what was previously there. When I reboot the machine the usage is set back to normal and we can continue.
View 2 Replies View RelatedAm using 10.04 and quite happy with the way it is working. my nephew and my mother have also switched to ubuntu.
To save on internet usage and load on the ubuntu servers, can i download upgrade files in one computer and then upgrade all systems?
how to Check the disk usage of different linux servers using df -h linux command. My host server is 66.50.100.1, I can check its disk usage by using df -h command. I got my disk usage. Now using my host server Im going to check the server 66.50.100.3 disk usage. Is its possible to check the disk usage of 66.50.100.3 using my host server?
View 4 Replies View RelatedIs there a possibility on Ubuntu to Broadcast TV with shoutcast?
View 2 Replies View Relatedso my server is doing fine, but there is one odd thing I would like to fix. When I start and stop services, the CPU is maxed out for about five seconds each time. The services start the same speed, but it still does this. Small things like lm_sensors don't do this, just things like httpd and sendmail. THis server was upgraded to Fedora 11 with a netinstall CD a few months ago.
View 4 Replies View RelatedI am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View Relatedthere is a program on the shoutcast website called sc_trans which can be configured fairly easily to transmit a playlist via shoutcast. However, it seems to require a set playlist, and there is no easy and reliable way to tell it one song after the other what it should play (say, to get it to play whatever I am playing in Rhythmbox if I were to write a program to do that).So the question I have is this: Is there an alternative (preferably open source) shoutcast transmission library that I can use instead?
View 1 Replies View RelatedI was trying to get the status of memory usage and disk usage using sigar in windows and ubuntu. done this in windows by just copying the sigar library into jdk library. But i was unable to do so in ubuntu. I've copied the library to java-6-sun library but still can't run the program.
View 14 Replies View RelatedI am running 10.04 Gnome. I have installed Amarok and would like to use the Shoutcast internet radio streams. How do you do that?
View 8 Replies View Related