Whenever I login as root, an e-mail with the subject "Security information" is sent outwhere the e-mail address for this message is configured? I need to change it (or perhaps disable it).
View 9 Replies
I've recently installed 64bit version of ubuntu 9.10 but the GDMsetup doesn't seem to be working as it was in 9.04 i mean to say when you type gdmsetup at console the login window pops up where i can check the check-box "Allow local administrator log in" under security tab. to enable login as root. since it is not working i've to type password every time when i install a package or create a folder in root directory or mount a drive which is quite irritating how can i login as root in gui mode etc... also is there some syntax which i can put into /etc/gdm/custom.conf so i can log in as root....
View 2 Replies View RelatedIt's my personal computer, no other users, no one else in the house. I'm behind a separate stand alone firewall (Checkpoint device). I'm the admin on my machine and I'm going to enter sudo, or login as root, every time I need it anyway.
There's no way that having to switch to root is going to make me stop and think about what I'm getting ready to do. In fact it's quite the opposite. If I'm in the midst of troubleshooting, I'm preparing to enter a command that I think is going to work, and I get "Permission denied"... The aggravation is more likely to reduce my logical thinking, and I'll immediately switch to root and type it anyway.
I DO understand the rational of setting users (even admin users) to a lower permission level. However I don't understand the lack of a command to make a user PERMANENTLY root equivilent. Switching back and forth is a waste of time. AND it means that I now have to deal with two home directories... /root and /home/user. Having to type sudo, or su to switch to root, does not protect my system. It only aggravates.
Is there anyway to have a different password for login and root? For example, my account is Bratu. I want a login password: ABCD and my root password: EFG
View 1 Replies View RelatedOn my Ubuntu 8.04.4 LTS webserver I desperately want to disable the Root account. But at the moment I am unable because I prefer to use Nautilus/Dolphin on my home laptop for SFTP. The graphical interface also helps when comparing multiple config files at once, something that being limited to NANO or PICO would make extremely painful. The problem is that if I don't use ROOT I can't perform any SSH or SFTP actions with a graphical interface, because I can't use SUDO without the terminal. Does anyone else leave root enabled? I have a non-standard port, disabled password authentication in favor of ssh keys, and I have a tarpit configured
View 2 Replies View RelatedI'm trying to turn off SSH root login on Ubuntu 10.10. However, changing PermitRootLogin=no (/etc/ssh/sshd_config) do not work. Here is the sshd_config:
[code]...
I have a problem, I have installed Fedora 11. And i need to login as root user.
How to do so?
Found a major security hole in one of my more crucial linux servers today. (Only locally) I can use the user name "root" and any string for the password. So I can literally type "poop" as the password and the server lets me in. I know how to set root password settings for SSH and sudo, but where are settings located for local access that would allow something like this?
View 14 Replies View Relatedhow to enable direct login of root via ssh?I find and info that i just need to update /etc/ssh/sshd_config, but i couldn't see that file in the location.
View 14 Replies View RelatedI got this from a website (cant remember URL).
Be warned if someone actually does manage to login as root on your computer or server.
Edit .bash_profile for root. How do I do this?
Code:
echo 'ALERT - Root Shell Access on:' `date` `who` | mail -s "Alert: Root Access from `who | awk '{print $6}'`" your@email.com
Replace your@email.com with your own email. Save the file and exit.
Remote root login is enabled. How do I disable this
View 14 Replies View RelatedCan't seem to do it, wondering if anyone knows how? Normally there's something in sshd_config that can be switched to true or yes to allow root login but I can't see it in fedora 12.I can login via root at a terminal no problem, just not via ssh, I get access denied every time. Also, I need to login using password authentication.I've done: 227169 but that's just for GUI which I don't really need since I rarely ever log into the GUI.I have also searched through here and mostly only found info such as above, how to enable root login for GUI, or billions of posts about how logingin as root is bad but I cannotswer to my question.DISCLAIMER: Please do not reply to this thread if all you can contribute is the question of why I need root or to put some message telling me I can do everything using su, etc, etc. Please only contribute if you can answer my question. A: My machine and a valid quesiton. B: Spirit of Linux is open, not restrictive
View 3 Replies View RelatedI have a habbit of openning a 2 sessions of xwindow (I'm using KDE), one as user to browse the internet and the other as root to do some admin work. But someone told me that login to KDE as root is bad in terms of security. Is this true?
View 3 Replies View RelatedI added the following lines to /etc/ssh/ssh_config file:
PermitRootLogin no
DenyUsers root
DenyGroups root
And then restarted my sshd as followd:
# /etc/init.d/sshd restart
Then, I exited out of the box and logged back in as root thru ssh.
1- What am I doing wrong?
2- How do I restrict root direct console login?
I want to count the failure root login attempts so that do an action when the user faild to login as root for three consecutive times (like log a line in syslog).
View 4 Replies View RelatedFor a month or so now, I have been enabling ssh and opening port 22. I cron'ed the start and stop commands to leave them open only a few hours a day. After a bit, I checked my logs to find that some IP or another was attempting to brute force my root account.
I took little real threat by the offense.
(1) my system does not allow root to login and
(2) it would cut them off sooner than later when my system issued the stop command.
fast forward
Today I log in to find that all of my log files, as viewed from the gnome log file viewer, were empty of entries from about noon yesterday and prior.
Though I haven't noticed anything at all out of the ordinary with my system, I would like to get more opinions on the matter. Would there be any conceivable way that this was an automatic system routine, a clean up action of something? Additionally, if I was indeed the victim of a hack, what can I do to further protect my system (keeping in mind that I do want to access my system via ssh from time to time)?
I get the problem to acess root password when i am in user login, means wahen i am in user login and want to install software from terminal then he asked root password, when i supplied root password but he give me login incorrect.
View 2 Replies View Relatedubuntu 9.10 login panel is worse with respect to ubuntu 8 since now all the users with names are shown without a way to hide them!Why don't keep the old way at least as an option?
View 5 Replies View RelatedHaving read on the forums about some of the dangers of running Wireshark as root, I would like to know if anyone can suggest some alternative packet sniffers/network analyzers which will offer similar results but without the security issues. I am using Karmic Koala on a Fujitsu Siemens laptop with wireless router (firewall enabled)
View 7 Replies View Relatedi updated both browsers i have and lost my secure log-in pages (no padlocks showing ) concerning different Web mail accounts.Just before i did these updates i checked an unrelated thing on-line regarding my sound card of which i kept a copy of and got this message below :
!!ALSA/HDA dmesg
!!------------------
[ 12.762633] cfg80211: Calling CRDA for country: AM
[code]....
just migrated to Lucid from Jaunty and noticed that the login startup screen looks more like windoze (shows all authorized users).One of the endearing security checks with Unix was that if you had access to a console you had guess both userid AND password - the system wouldn't tell you which was wrong.I feel that we have lowered security by making the list of authorized users visible on a console. Is there any way to turn it off and force users to enter both userid and password?
View 4 Replies View Relatedwant to run VirtualBox with root permissions. Trouble is that only when run as root i can access attached USB devices inside of a virtual machine, otherwise, these a greyed out).Now running VirtualBox as a root user also changes the configuration folders, making all my virtual machines already defined disappear. I also don't want to copy all to the root configuration folders. Is there a way to give the VirtualBox root permissions but without actually running the application as a root user. Is it possible to do without changing the permissions of the non-root user, i.e. i don't want my user to have all root permissions, due to security considerations.
View 1 Replies View RelatedI run ProFTPd with TLS authentication on my Debian Lenny server. My problem is that despite of the fact that my users connect chrooted, one of my friends had root privileges after logging in form a Macintosh and could browse the root directory, too.
View 1 Replies View RelatedI'm seeing really bad user login format under a standard installation and am wondering why ubuntu does this as default. I have noticed that the graphical login for gnome sizes itself to accommodate a user's exact password length. This indicates to me that somewhere on the unencrypted part of a standard installation with user encryption contains at least some indication of the content of the password length which seems a security flaw even if not a complete hole, it majorly reduces the number of attempts a cracker would have to cycle through.
And that's assuming that *only* the length is contained. Furthermore it seems that it would be MUCH better to simply display the number of characters entered into the pw field and allowing the gui to expand itself from an fixed size as the field is filled out so the the user still receives visual feedback for entering characters. Either a simple character count display should be entered into the field or a 10 dot to new line so that one can visually quickly count the number enter by multiplying from a 10base graphical observation.
I found this on Bee's website. For more info on this exploit there are links there:[URl]..All you have to do in Fedora 13 is enter the following lines in a shell as normal user:
[Code]...
I don't think this can be considered solely an "upstream" problem, because I first tried it in Arch using the same version of glibc, and the final command causes both gnome-terminal and xterm windows to disappear.
I've started to get emails that would typically come from [URL] as [URL]. These emails come from services that send out emails (backup programs) directly, or from cronjobs. I've logged in as the non-root account and either sudo su - or su - to root and the restart the service at one point or another. If I login directly as root and bounce the service or cron the emails come across as from root. I don't see anything in my environment variables after I su to indicate what would cause this. I'm not sure where else to look? A pam setting? This seems to have happened between Fedora 10 and 14 (did a bunch of overdue upgrades recently) I've only got Fedora so I don't have anything to compare to. In Fedora 10 I did not have this problem.
View 2 Replies View RelatedThe Wireshark website specifically warns against running WireShark as Root....
Quote:
Administrator/root account not required!
Many Wireshark users think that Wireshark requires a root/Administrator account to work with.
That's not a good idea, as using a root account makes any exploit far more dangerous: a successful exploit will have immediate control of the whole system, compromising it completely.
First of all, most Wireshark functions can always be used with a (probably very limited) user account. In particular, the protocol dissectors which have shown most of the security related bugs do not need a root account!
Only capturing (and gathering capture interface information) may require a root account, but even that can usually be "circumvented", see CaptureSetup/CapturePrivileges for details how to do so.
Having trouble adding a regular user with ssh access on Hardy 8.04. I can ssh into root, but not into the newly created regular user with the same ~/.ssh/authorized_keys
Code:
sshd_config has:
AllowGroups sshlogin
AllowUsers user root
[code]....
what could be preventing ssh login to ~user? And yes I would like to disable root ssh access, but it would be nice to be able to ssh into user first
I had a bit of a play with the pam-usb module today and thought it was very interesting. I can now log in to my computer using my SD card, which is pretty cool.I was wondering if it would be possible to make it such that the ONLY way to authenticate would be by means of this SD card. I realise that this probably isn't the wisest idea ever and I would be better off generating a really long, really complicated password and storing it away somewhere safe for when I lose my SD card (because it would happen).
View 1 Replies View RelatedI have a fedora 10 server to which I can ssh as the root user using RSA.
However for any user other than root a password is always requested.
I have made changes to PAM and check the rights to all the files and read pages upon pages. I can mess it up completely so no one can login but cant get it so that anyone other than root can use a public key.
Another interesting and may be related item is that when any user logs in, with a password, via ssh then they get the error:
Could not chdir to home directory /home/xxxx: Permission denied
But they can cd to their home directory and have no problems.
I am thinking that this may be to do with the mount. The home directory is on a HDD but the system dive is an SSD.
I have gone over everything so many times I am now lost, I must be overlooking something so simple and obvious its just not coming to mind.
