I've done some searching on googlubuntu for and answer to this but haven't found anything.
As a Linux newbie I was wondering if there are certain types of output from the terminal I should beware of posting for everyone to see? Also are there any codes; that, if I were to be asked to run and report the output on, should raise a red flag?
For some odd reason, I cannot post on the ubuntu forum and the LinuxMint forum. Yea, I know.... the irony... I am using Mozilla and have tried Chromium, but that did not fix my problem. When I click on "submit" to post a thread, the page will just say "loading..." and nothing happens for a really long time. Does anyone know what is up? I tried posting on one other forum that I go to often and it seems to work out fine. I haven't tried any other forums though.
View 7 Replies View RelatedI've used the forums infrequently, being more of a mailing list kind of guy. But I'm currently tinkering with an old laptop I got as a "gift" which doesn't have an ethernet port, And if I wanted to use my cable modems usb connection to apt-get etc for the installed Ubuntu Lucid, I had to disconnect my router. This pc isn't yet configured with my mail client etc... So I thought I'd try the forum again...I noticed that using: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.3) Gecko/20100423 Ubuntu/10.04 (lucid) Firefox/3.6.3 Which has not been modified yet (except to add the scroogle search bar) I keep timing out.
IEI logged in to ubuntu forums, found an existing thread related to something I'd like to do with it.clicked on quote, and began composing a followup. When I was ready to preview the thread I got an error that said I wasn't logged in. and suggested I use some included form to try again. The form looked like it wanted my username and password but wouldn't let me enter the required info into the blank fields... I had to simply log in again with the login link at the top of the forum page, and use the back button (alt+leftarrow) several times until my reply was recovered so that I could preview, fix typos & submit..I searched the forum for "forum login timeout" and found one relevant post which appeared to say the only reason it's OP had a problem was do to making changes to his copy of firefox but that it was fixed ([solved]) without saying how he fixed it. There was a reference to using about:config which is beyond my skill level...How does one keep the from login session from timing out while one's browser still has an open window to what was a logged in forum page anyway
I am really a Newbie in bash programing and I need to perform a permutation, which I did using one post from this forum as follow.
#!/bin/bash
list=`echo {1..12}`
for c1 in $list
[code]....
I am searching for a tool that notify when new post is made on a thread. I found one program "phpBB post notifier", but it is for windows and can't run with wine. There is no author and developer page to check for more information.
View 3 Replies View RelatedI am using apache2 with subversion and trying to get post commit script to run an svn update command. All svn commands seem to work fine manually
Everything used to work fine but then the server ip changed and I can no longer access it with the web name and have to use the ip directly
I am using tortoise svn with vista on my work machine
Here is the script
#!/bin/sh
export LC_CTYPE=en_US.UTF-8
/usr/bin/svn update /home/common/webroot/bob
Here is the result.
Command: Commit
Modified: C:UsersMattDesktopcheckout - bobindex.php
Sending content: C:UsersMattDesktopcheckout - bobindex.php
Completed: At revision: 63
Error: post-commit hook failed (exit code 1) with output:
code....
I think what i need to do is update the certifcate for the apache2, but I'm not sure how to do this, where to put it, and then which of the thousand apache config lines needs to be changed
I have just installed webcontent control following these instructions - [URL] It has blocked the content that I wanted blocking but also when I try to access the ubuntuforum site, all I get it a white screen.what I need to adjust in the configuration so that I can access the forum with content control enabled.
View 9 Replies View RelatedTerminal with real time dmesg output I want to use tty12 for system messages. Is there a way to mirror all kernel messages to there?
View 2 Replies View Relatedhello
I tried to find a good subject but it was the best of mine, anyway I'll explain it here.
some time I do some thing like installing a new application in Linux terminal of my office PC but it take a long time and I have to go home during its installation or configuration process that it is not good to cancel it.My current solution is abandoning the process until next day. I wanted to know is there any way to redirect an input and out put of a terminal to another one, if it works I can continue my abandoned process by ssh to my Linux office PC and redirect that terminal to my new remote sshed terminal from my home.
Thank a lot for any help.
When I restart my computer the following messages come up:
__________________________________________________ _
init: usplash post-start process (2221) terminated with status 1
* Stopping ClamAV virus database updater freshclan
[code]....
I was wondering how to activate encryption on my home folder, like sugested when creating the first user? in 10.04Also, is it any good to use?It's a work computer with sometimes private documents (cv, docs, etc) and i would like to be sure no one can access it, even as root.
View 3 Replies View Relatedif you do the command conky in terminal, it starts conky ofcourse, but it also shows output to that terminal so you can't do any other commands to that terminal, Is their an option like you can do with the '&' sign in other cases? If you do the '&' sign with conky it still gives output, also the conky -d command gives output...
View 9 Replies View Relatedcurrently I'm fiddling around with mod_security for apache2 configurations on CentOS boxes, right now in a test environment first (i.e. separate non production box).CentOS includes the mod_security "Core Rule Set" by Breach Security Inc, the devs behind that module.So far all's running mostly, logs/auditlogs etc.For simple testing, I made a small php form as following:
Code:
<?php
$link = mysql_connect("localhost",$user,$pass); //un/pw obfuscated for forum post
[code]...
I would like to capture all output spewed to a terminal session including processes that are terminated that were invoked from a script running in a terminal window. this is beyond capturing just stderr and stdout . for example
{
./script
} 2> stderr.cap 1>stdout.cap
if script is terminated (including because of memory violations) I get spewed output to the terminal I would like to capture that spewing to a file automatically or to a bit bucket /dev/null Is there another filehandle which can be redirected to do this? If so how or is there another way???
I want to know how to get the current coordinates of the mouse outputted to terminal, for use in a bash script.
View 1 Replies View RelatedIn synaptic package manager when I expand "Details" tab (at the time when some software is installed or removed), I can see a terminal. I want to capture the output of terminal into a file. I tried to highlight and right click. But there is no context menu(copy, cut)
View 4 Replies View RelatedI'd like to write a script that invokes a gnome-terminal session which slowly reads out text like the phosphor screensaver (could be anything, a log file, ascii art, song lyrics, whatev) and then closes. I can invoke a terminal using [gnome-terminal -e 'cat /var/log/dmesg'] but the output flies pass by too quickly.any way to slow it down? I know it seems like an odd request but if anyone has a suggestion I'd love to hear it.
View 3 Replies View RelatedI sometimes stick my neck out and provide somewhat detailed, and often risky, "Mr-fix-it" remedies for boot problems. Now, I know it's possible to amend each command with "whatever_command > whatever.txt" in which case it'll place the command output in a file in /home.
But if you're directing someone to run a lot of commands as I did here is it possible to save the output of all commands to a .txt file without amending each command?
Or is it already saved somewhere that I'm not yet aware of? I wouldn't be surprised if the latter were true, I just haven't yet found it
I have searched a lot for solutions of this problem, but there seems to be no solution that works for me. It was time to update my installation... AS I have NEVER updated it. So I ran the update manager and launched updates. Many packages completed, but linux-image-2.6.32-25-generic (2.6.32-25.44) gave me a lot of errors. I don't ave the terminal output from the update manager, but I have info from apt-get install -f. I am using root account.
Code:
root@ubuntu:~# apt-get upgrade vlc
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
7 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Do you want to continue [Y/n]? y
[Code]...
There is text based game in the Ubuntu repos called gomoku (just 5 in a row) it comes with the package bsdgames. The manual page [URL] lists an option (-b) to run it in the background. I want to try that and if I know how it works create a simple graphical front-end. When I start the program with:
Code:
gomoku -b
it starts and remains active, the terminal does not return to prompt which is OK as the command is not finished. The manual says the program reads from stdin, and this might sound stupid but how to get anything there?
I've tried to pipe an echo command to gomoku which works but ends the program after is receives input.
Code:
echo "black" | gomoku -b
just finishes. After that when you type another command like:
Code:
echo "justsometext" | gomoku -b
gomoku tells it expects either black or white as input. So it forgot the previous "black" because it is a new instance.
How do I pass text to an already running gomoku?
I'm writing a couple of programs in C and need to do something to formatting the output. I'm after producing something like a old mainframe screen or early micro where you could PRINT (x,y) to put something on the terminal where you want it. Learning GTK or such is not an option due to time constraints, and some fields need updating frequently during processing, so letting the terminal scroll is going to drive the operator up the wall pretty quickly.
View 2 Replies View RelatedWhat is the output of "date -u +%jXfce|sha256sum|sed 's/W//g'" if you run it in a terminal emulator?
View 3 Replies View RelatedWhen I type (in new 10.10) soem cmdline comands like "ls -l" then some of the directories have a different fore-and background color (e.g. black on green) while the remaining other directoreis are blue on white.
Where can I find out the meaning of the diferent colors and how can I change them?
If I go to menu
Terminal->Edit->Profile Preferences->Color
then I can set only the full overall background and foreground color. But here only certain parts have a different color. the main color (black on white) is suitable. I do not use system theme.
How can i get the RAM Memory on system in terminal when i have 3 GB with an output like this:
3072
or
3145728
[code]....
if we type a command such as "locate somefilename" in the terminal we will get all the paths to the file name as output. If i want to copy only one line from that output how do i do that without using mouse?i need terminal short cut to copy one line
View 8 Replies View Relatedif i will sound stupid but i can't find a command that would echo output of some command. Let's say that i want to echo the third line of ls -a. I know of the tail command but this command starts from behind.
View 4 Replies View RelatedI have a server client prog in which server is my 'agent' and client is 'manager'. Following is the code for both agent and manager. I want my agent to send what manager is requesting. But it is not working the way I want. The parameters which manager is requesting, agent has to send to manager but in this program result for those parameters is shown on agent's own terminal window. Where as I want them on manager's window. Secondly, there result is not correct, means it is giving ' 0 K ram and 0 no of process....
Code:
//code for MANAGER
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <stdio.h>
#include <unistd.h>
#include <errno.h> .....
I am trying to display a text using crontab. My settings :
*/2 * * * * /bin/echo "hello"
This setting sends a mail to the user, instead of displaying on the screen. Now tried changing the setting to:
*/2 * * * * /bin/echo "hello" > /dev/tty1
Now I can see the text on the screen, but this setting comes with a catch. What would happen if the user changes the terminal. for instance if he gets into tty2, he wont have write access on tty1. So the user gets a mail saying "permission denied". Is there any way that I can force the user to use a particular terminal or can a cron job be set in a way such that the user would get the text irrespective of the terminal he logs in.
running current with 2.6.33.1-smp kernel i cant seem to get the slib slackbuild to run. it just quits without ever building the tgz. i hope i can attach the terminal output of the compile.
View 8 Replies View RelatedI'm installing and configuring my first server using RackSpace CloudServers running Ubuntu Karmic Koala (9.10) and I'm now installing iRedMail. The installation runs successfully until I recieve this error:
Code:
The following packages have unmet dependencies: mysql-server-5.0: Depends: mysql-server-core-5.0 (>= 5.1.30really5.0.83-0ubuntu3) but it is not going to be installed
E: Broken packages < ERROR > Installation failed, please check the terminal output. I understand this is telling me there is some software that iRedMail (or something iRedMail is dependant upon) that needs installed. Is this correct? And if so, what is i needing installed and how do I do that (aptitude install example-package?)?