For example, can I write something to the effect: block all outbound UDP connections over port 53 except those going to IP 123.456.789. Or stated another way: Block outbound to port 53/udp NOT going to ip address 123.454.678Is it possible to do this? How would I write the argument?
View 3 RepliesJust wanted input for this script i have cobbeled together. Its not done yet. I am trying to think of ways to close up my outgoing while maintaining full functionality of my laptop ( irc, web stuff, a torrent or two, etc.) . Anyways, I have done some myself; as well as, pulling bits and pieces from other stuff out on the web. I am starting to wonder why i have to write a specific rule to check for spoofed packets if my default input is set top drop. wouldnt it be caught?
Code:
#!/bin/bash
### Laptop + Desktop: No Forwarding firewall ip4 / ip6
### Distro > Debian / Ubuntu.
### oliverteasley@gmail.com
[Code]....
I am setting up a virtual server. Ubuntu 11.04, "minimal provider image".UFW was disabled by default. I set it to default deny. Allowed HTTP, SSH and other standard stuff, and enabled it. All seems to be OK. Adding one rule to block some annoying security scanners causes ping not to work. I'm not an Iptables expert, but it looks OK to me. I got it from some website, rather than invented it myself, but modified to to fit the ufw config file syntax. What in that rule prevents pings?!? It seems completely unrelated.
View 1 Replies View RelatedQuestion (and Google results aren't making this clear): Ubuntu has both iptables & ip6tables installed. 1. If I set a rule in iptables, does that rule also apply to ipv6, or just ipv4?
2. If "no" to above, then it would be prudent to *also* set ip6tables rules as well if I want to maintain an active firewall, correct?
3. Does ip6tables rules have the same syntax and behavior (more or less) to iptables rules - i.e. can I just copy my iptables rules & change "iptables" to "ip6tables"?
4. Any gotchas or issues that I should be aware of?
tell me the command for iptable rule to add in Chain RH-Firewall-1 to block ftp port & the ftp server was configured in public ip address,i searched in google but i did'nt get the exact command for iptables rule in Chain RH-Firewall-1.
View 3 Replies View RelatedI am trying to write a udev rule for my headset but i don't understand where i get the information to make the rule. I know i need to add
Code: RUN+="bash /home/luke-jennings/headset" at the end of it so the script i wrote runs. I don't know how to get any of the identifying info for the headset and which bits to use where. How do I get the information?
Currently I'm looking into implementing mod_security on all our apache servers. The installation on CentOS 5.5 comes directly with the "Core Rule Set" by the mod_security devs (curiously Debian and Ubuntu do not carry these) They also offer the Enhanced Rule Set for mod_security in a commercial package [URL] The main point there in their info link is the first point
Quote:
Tracking Credit Card Usage as required by the Payment Card Industry Data Security Standard However acc. to this wiki article ( http://en.wikipedia.org/wiki/Payment...urity_Standard ) that specific requirement isn't stated anywhere, as well as my colleague who's working on the PCI-DSS compliance for our code/servers/etc. mentioned that he hasn't heard of this specific requirement either. So my question would be if anyone has any experience with their ERS package and if it's needed for the PCI-DSS compliance compared to the requirements given in bullet points @ wiki article.
I need help creating an iptable rule. The iptables are installed on my router. My router also connects to a "hide my a**" vpn account
at 79.142.65.5:443 The goal is to somehow force the traffic to go through the vpn, because what sometimes happens is, the vpn connection drops (for what ever reason) and my real ip becomes exposed. Basically, I want to block "myself" from accessing the Internet when not connected to the vpn because of privacy concerns.
Below is my iptables. It has the 3 default chains and it also has many custom user chains. I need to know what kind of a rule to add, What interface to apply it to (lo,tun0,br-lan,eth1) and the correct chain to insert into.For example, you could tell me something like:
Quote:
FORWARD chain, change rule 1 to
iptables -R FORWARD 1 -j zone_wan_MSSFIX -p tcp --destination-port 443 -i eth1
Obviously, That was just a guess, I need someone that knows iptables to help me.
Code:
Chain INPUT (Policy: ACCEPT)
Rule # Traffic Target Prot In Out Source Destination Options
Rule 1 72.95 KB DROP all * * 0.0.0.0/0 0.0.0.0/0 state INVALID
Rule 2 1.11 GB ACCEPT all * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
[code].....
I guess this is the right place to put questions about iptables, so forgive me if it is not.I have a MySQL database which I need to allow connections to: 1 - the internal network; 2 - the web server (Apache) connections;3 - A user who is out of this network in a range of dynamic IP.Let's suppose the range IP for this user is 179.4.247.0-179.4.247.254 and the server; where is MySQl and Apache is 60.22.30.232. This user will use the windows client MySQL tool to make connections into this database.
So I think these rule below allow connections to the internal network and apache:
iptables -A INPUT -i eth0 -m state state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -i eth1 -m state state ESTABLISHED,RELATED -j ACCEPT
[code]....
My firewall , wich is an Ubuntu server 10.10 , have 3 interfaces:
eth0(192.168.0.254):linked to the DMZ
eth1(192.168.1.254):linked to the LAN
eth3(212.217.0.1):linked to the Internet
-The DMZ have one web server with a static address (192.168.0.1).
-My LAN address range is (192.168.1.2-192.168.1.100) managed by a DHCP server in the same firwall machine.
There are some of the rules that I need to set up :
-Allow HTTP between the LAN and the internet
-Allow HTTP between the web server in the DMZ, and the internet.
Is there a way to tell the firewall , to redirect all incoming HTTP requests only to the web server in the DMZ ?
I'am using the explicit match 'quota' with iptables. I wonder how can I save quota between restart for every rule. All the quota resets at reboot.
View 1 Replies View RelatedHow do I redirect all the UDP traffic on port 27016 of my current dedicated server to a new IP port 27015 using IP tables?
View 1 Replies View Relatedhow can i drop igmp port 0 packets with iptables rule? my log file is full of this router advertisement.
View 2 Replies View RelatedI am using squid on my fedora box as a proxy server.By default the iptables (Firewall) service is on.To allow web pages to my client machines i stop the iptable service.
#service iptables stop
By doing it client computers start browsing.kindly how can I add a rule so that without stoping firewall client compter work fine.my perver IP address is 10.1.80.10
I'm not an iptables expert. Anybody know how to create a rule/chain that will log info similar to what tcpdump -s0 would do?
View 3 Replies View RelatedI have a write call to a ttyACM serial device that blocks after several hundreds bytes are written.I'm writing in ~25 byte chunks, so I have 5-8 successful writes, then the next write blocks forever.I can bypass the blocked call using select, but I can never call write again without closing and re-opening the port.
The serial port is opened correctly because I can read from it just fine. Write permissions are correct, and it's opened RW.The code is likely correct because I tested the same code using the same device on a pure RS-232 serial port, and it worked fine - no block. Is there anything to know about the linux ACM module?It's my understanding that write calls basically shouldn't block.They're supposed to return -1 if there's an error.
The iptables has every rule set correctly, the users in the subnet works great, but I have the following issue.every user connect to a mysql running on the internet through the port 3306, the forward and masquerade do the job. Now I have a user in the outside, and he wants to connect to a mysql in a certain machine (Not the gateway), prerouting rules solve my problems, but all the packages from the inside users goes now to that certain machine. I would like something like if the package passed trough masquerade don't pass trough the prerouting rule, and if it come from the outside (Not a package that come from a petition from the inside) pass trough the prerouting rule.
View 6 Replies View RelatedI can browse the iso image easily enough with a loopback mount, but when it comes to mounting the actual CD (which I did first), I get:
Code:
$ sudo mount -t udf,iso9660 /dev/dvd /mnt/dvd
mount: block device /dev/dvd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
/var/log/messages isn't very helpful, either:
Code:
Jul 15 15:15:56 bkorb-dt kernel: attempt to access beyond end of device
Jul 15 15:15:56 bkorb-dt kernel: sr0: rw=0, want=68, limit=4
Jul 15 15:15:56 bkorb-dt kernel: isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
$ md5sum openSUSE-11.3-DVD-x86_64.iso
adf5d2a0a03c1e3aaf102fd6a4771b87 openSUSE-11.3-DVD-x86_64.iso
I burned it with K3B and it gets the same result trying to mount it. K3B seems to know that the image is an iso9660 and is able to display the various 9660 id fields just fine. It just won't mount.
I was trying to write IPTABLES script to block the ICMP ping using the below mentioned command in OpenSUSE 11.2 Doing this in VMware.....
iptables -A OUTPUT -o eth0 -p icmp -j DROP
& then I tried to ping the different computer & it didnt allow me to ping.
Then I deleted using the command -
iptables -D OUTPUT -o eth0 -p icmp -j DROP
then I couldnt ping also. Another thing I found is my firefox is not connecting to the internet as well, but before writing the script, I can connect to internet.
I did a "dhclient" & iptables -F....
Is there a way to delete files on the commandline that uses the KDE-Wastebin?It appears that I never ever need the KDE4 Wastebin for files that I deleted through Konqueror or Dolphin. It is only when I delete files on the konsole with rm that I wish I could undelete them. It always happens like that, mostly by being in the wrong directory or using a wildcard when I should not have. (I don't have any erroneous deleted file right now, and I do have plenty of backups, but I just wonder whether there is something better than rm to use generally on the commandline.)
View 9 Replies View RelatedI'm trying to block an incoming URL. My ISP is hijacking 404 pages and annoyingly changing the URL line in the browser and flashing all sorts of popup ads. I just need it for incoming URLs which my router doesn't seem to handle. I'd prefer something packaged with Ubuntu 8.04, but anything simple will do. I know in KDE I could edit the kdeglobals file with:
[KDE URL Restrictions]
rule_1=open,,,,[URL],,false
rule_count=1
I did one of the recommended port scans and all ports passed but failed on pinging. How do you turn pinging on & off with GFUW?
View 9 Replies View RelatedMy question is how to block a subdomain of a site. To make it as clear as possible, I'll give an example. I am regularly entering this arbitrary site [URL] which redirects me to this page [URL] and this index.html takes an image from a subdomain which is a subfolder of itself, that is: [URL]. What I am asking is blocking the images to be taken, but not the main page itself, i.e. to block www.somesite.abc/images/ without blocking the overall www.somesite.abc.
My idea was to use the /etc/hosts file by redirecting to loopback address:
Code:
127.0.0.1 www.somesite.abc/images
But it looks as if it doesn't affect things at all. Should I use it another way? Modifying /etc/hosts.deny maybe useful?
I have noticed interesting problem. I use two browsers - Firefox and Konqueror. Konqueror is configured to use tor, Firefox not. Using Gufw I block all incoming and outgoing traffic and it works while using Firefox, I mean that I can't view any www site and it is ok. But if I use Konqueror I can establish any conection. How to understand this? Should I have different firewall while using tor?
View 5 Replies View RelatedI want block https sites if suppose block the http it will opening in https.
View 9 Replies View Relatedon my linux server i have many websites but with difrent ips address, is some way to i can block all the ips with many connection (100+) just from my website not from all websites
View 5 Replies View RelatedIs this how I would do that?
iptables -A INPUT -p tcp --destination-port 21 -d ! 168.192.1.2 -j DROP
This should block all incoming connections on port 21 from 192.168.1.2, correct? Thus preventing that IP from logging into my FTP.
how to block all ports except pop,pop3,smtp in nat using iptables in squid on redhat A3
View 2 Replies View Relatednow still don't know how to use that properly.now after a quick sudo tcpdump -n -i eth0 > tcpdump.txtits obvious to me at least that anything 85.9.102.* is not to be trusted.see attached.how do i ban everything and anything from that block, pref without upsetting firehol. whats opinions of ipcop, btw.
View 3 Replies View RelatedI'm trying to implement this method to block php injection attack using fail2ban: here it is, however I'm not sure it applies to Ubuntu. You see, there's this filter that must be added to the fail2ban jail file:
HTML Code:
[php-url-fopen]
enabled = true
port = http,https
filter = php-url-fopen
[Code]....