Ubuntu Networking :: Unable To Wireless Connect With Router?

Apr 23, 2010

I have had a router die on me and have bought another (maybe a bad buy!) The new router is Linksys WAG120n. Ethernet is fine. Laptop wireless adapter is Atheros AR5009 802 11a/g/n. I have setup a wireless connection but it is not connecting to it. I have checked the router settings and these seem to be OK! I'll try to give any details required.

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Unable To Connect To Wireless Router

Aug 12, 2011

Firstly, the actual problem I'm having is that when I start my computer (netbook) up in the morning and try to connect to the router (wirelessly) it just... doesn't work. I've used it before, at full signal strength, and it was completely fine. It never disconnects me or anything - but if I shut down my computer, like I do overnight, when I start it up again often it's hardly getting a signal at all (or so it says) and when it tries to connect it makes the connecting animation and occasionally flashes to a circular thing like firefox's loading animation. Eventually it just fails.

I try restarting my computer, but it doesn't seem to help. The last time, I had to wait until the signal looked "full" again, then delete the settings in "edit connections" for that router and only then would it let me log in again, even though I was using the same password from the same computer (even in the same place). That only seems to help when the connection looks "full" though, and even then, not always. Normally I'd try resetting the router, but I can't because it's locked in the next room (I rent a room here and the guy with the key is rarely around) but honestly I don't think the router is causing this, for a few reasons:............

View 9 Replies View Related

Ubuntu Networking :: Use One Wireless Router To Connect/detect To Another Wireless Router?

Aug 1, 2010

My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.

View 2 Replies View Related

Slackware :: Unable To Connect To Wireless Router

Dec 9, 2010

I am running slackware-current on a thinkpad r61i with ubuntu 10.10 i can connect to router without a problem but not with slackware the router is a belkin f6d4630.

View 8 Replies View Related

Ubuntu :: WUBI Wireless - Unable Connect To Home Router

Jan 19, 2011

I just installed WUBI and tried to connect to my home router but am unable to. I can connect to nearby unlocked routers, but am unable to connect to mine which is WPA-PSK [TKIP]. Also, this is the first time I've even seen Ubuntu

View 4 Replies View Related

OpenSUSE Network :: Wireless - Unable To Connect To Router (11.3)

Jul 15, 2010

I did a fresh install,I also enable the networkmanager.after installation,my wireless unable to connect to my router . when I click to connect , it prompt for password then after that nothing happen.

View 8 Replies View Related

Ubuntu Networking :: Unable To Connect To The Internet But Can Connect To The Router

Apr 6, 2011

I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.

[Code]....

View 5 Replies View Related

Networking :: Get The Wireless Router To Connect To The Other Wireless Router?

Feb 16, 2009

This is my basic setup:

[URL]

I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?

View 1 Replies View Related

Ubuntu Networking :: Wireless Card - WEP Encryption For Wireless Router Not Allow Me To Connect

May 5, 2011

wlan0 Authentication capabilities :

WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP

Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.

View 2 Replies View Related

Ubuntu Networking :: Tenda W322P Wireless Card Crashing Wireless Router On Connect

Jun 30, 2011

I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.

Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.

View 2 Replies View Related

Ubuntu Networking :: Unable To Connect To Router

May 19, 2011

I'm running Ubuntu 10.04LTS 64bit. The desktop running it does not connect to my router or the internet. My mac laptop does. When I installed windows on this desktop, it too could connect. But after reinstalling ubuntu, I cannot. I tried upgrading to the latest ubuntu, but that just bricks my computer. Here is my ifconfig:

Code:
~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1d:09:95:39:76
inet6 addr: fe80::21d:9ff:fe95:3976/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1

[Code]....

View 9 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless Router

Mar 17, 2011

I have installed ubuntu 10.10 and am really happy. I want to sort the wireless conection out now. I have been through this forum for hours today and can't get it working. I have a Broadcom wireless card, which seems to be working fine, but I am not 100% convinced.I have attached the output of some of the commands that I have seen referred to on here.

I am using the wired connection on the same router, so the router connects fine.I click on the network icon and I see the skyNNNN router in the list. I have tried connecting to it and it asks me for my password, which I provide then nothing happens until it asks me again.I have removed the security from the router and I then see the same skyNNNN router without a
lock icon. I try to connect and it still fails.I am not using an access list on the router, so there is no issue with the mac address.

View 7 Replies View Related

Ubuntu Networking :: 10.04 Can't Connect To Wireless Router

Apr 14, 2011

I have been using pppoe connect to Internet,now I want my notebook get on line,I bought a wireless router but Ubuntu(64-bite) can't connect to Internet through the wireless router.pppoeconf said that found eth0 and vboxnet0,but search concentrator failed and pppoeconf exited.How can I fix it.

View 1 Replies View Related

Ubuntu Networking :: Cannot Connect Wireless To Router

Jul 6, 2011

Just installed ubunto 1104 and I cannot connect wirelesly to my router. When I go through the trouble shooting the recommendation is to got to the device drivers page but the link does not take me anywhere. Here is the info from the terminal.

*-network DISABLED
description: Wireless interface
product: AR9287 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.

[Code]....

View 7 Replies View Related

Networking :: Can't Connect To Wireless Router Using Ubuntu 9.04

Sep 18, 2009

I'm trying to connect to a new Belkin wireless router, but wicd refuses to connect. I've been reading some of the other threads but they haven't made much sense as the hardware is different.

The output from the iwconfig command is as follows:

When I ran lspci it told me I had a RaLink RT2800 802.11n PCI Network Controller. On the box it says it "Supports the most popular systems" and mentions Linux. I'm using a 63 character WPA2 password, which has been copied from a USB key, so I know that is correct.

View 2 Replies View Related

Ubuntu Networking :: Can't Connect After Connecting To A Wireless Router

Oct 30, 2010

Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.

View 6 Replies View Related

Ubuntu Networking :: Cannot Connect To Linksys Wireless Router

Jun 12, 2011

I have an Acer Aspire 1 Netbook - this is running UBUNTU- When I try to connect to my Linksys Router in wireless mode it asks for password - but doesnt accept. I can see the Linksys in network manager plus several other networks in the vicinity. My other wireless devices all connect O.K. to the Linksys, and accept my password.. I can hard wire by ethernet to the netbook. Just wireless is the problem

View 3 Replies View Related

Fedora Networking :: Connect A Wireless Router?

Feb 16, 2010

I have a question. I just bought an internet router which also has wireless connection and my notebook also has wireless LAN.I was able to connect the computer to the internet router very easy. But i dont know how to make it work wirelesss under fedora linux 12...i mean how should i setup the connection to the router so i will be able to have a wireless connection?

View 4 Replies View Related

Networking :: Connect To Internet Through A (wireless) Router?

Jul 30, 2010

I connect my internet using pppoe to may DSL modem with bridging mode, and it goes fine until I try to put a wireless router between my PC and the modem. After I configure both modem and the router, I can run my wireless network fine by connecting it from a laptop, but my PC is unable to reach the modem at this configuration.

PC has address 192.168.2.100
Router has address 192.168.2.2
Modem has address 192.168.2.1
all with netmask 255.255.255.0

With bridging configuration in modem and automatic detect configuration in the wireless router, the wireless network run well, except the PC cannot ping the Modem saying that

Code:

root@firefly:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
From 192.168.2.100 icmp_seq=2 Destination Host Unreachable

Looks like my PC, which has Slackware 13.0, don't know how to reach the modem even they are physically connected.

1. how can I configure the modem, PC, and router so that the PC can reach the router? Do I need to do add route gateway from the PC?

2. How can I configure internet connection from the PC (before I use PPPoE)?

3. How can I configure the modem, PC, and router so that the wireless network is on?

View 7 Replies View Related

Ubuntu Networking :: Unable To Detect Router - Tries To Connect But Fails?

Apr 24, 2010

Ubuntu 9.10 comes with rt2870, the driver for my Zonet ZEW2545, and I have had to blacklist rt2800usb in /etc/modprobe.d/blacklist.conf in order for rt2870 to work. My network adapter is able to attempt to connect to my router, but after 10-40 seconds it tells me I am disconnected again. This adapter works fine on windows.

View 1 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless Router Linksys Wrh54g Ver 1.0?

Jul 1, 2010

i installed ubuntu 10.04 from internet.but i cant connect to my wireless router linksys wrh54g ver 1.0,but if i using Local area connection its working,however my wireless connection working in my other os win xp.

View 3 Replies View Related

Ubuntu Networking :: Manually Reset Router - Can't Connect With Wireless

Sep 22, 2010

I manually reset my router to defaults. Then I changed my router default password, SSID, passphrase, and disabled remote management. I used:

WPA-PSK [TKIP] + WPA2-PSK [AES]

security on the router. When attempting to connect, I use the "WPA & WPA2 Personal" option. This is really strange. I can see the SSID on both my laptops, but I can only connect with one now.

View 9 Replies View Related

Ubuntu Networking :: Connect To Wireless Router But No Internet Access?

Oct 27, 2010

At work, we (like almost everyone) are still full-on windows. I am currently trying to get away from windows because I am not a fan. my current windows machine (different from my Ubuntu machine) is accessing the wireless network fine, and there are no obvious problems there. Also, my Ubuntu machine can access my wireless network at home, so I know there are no driver issues. I set up the connection for the Ubuntu machine, and it seems to be connecting OK. I can ping internal IPs and by all statuses, the connection to the router is functioning. However, when I attempt to load a web page or ping a domain or external IP, it fails. I tried to ping the IP, thinking if that worked, it's probably the DNS, but pinging both domains or IPs fails. I have looked around at forums and posts, but none of them seem to match my issue (that's probably not true, but I am struggling to see the commonality).

Here are the results of "netstat -r":

Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.45.0 * 255.255.255.0 U 2 0 0 wlan0
link-local * 255.255.0.0 U 1000 0 0 wlan0
default 192.168.45.5 0.0.0.0 UG 0 0 0 wlan0

And here is "ifconfig":

wlan0 Link encao:Ethernet HWaddr 74:f0:6d:XX:XX:XX
inet addr:192.168.45.49 Bcast:192.168.45.255 Mask:255.255.255.0
inet6 addr:fe80::76f0:6dff:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]....

View 3 Replies View Related

Ubuntu Networking :: WUSB11 V2.6 Wireless / Connect To An Open Router?

Nov 15, 2010

I am trying to get my Linksys wireless adapter (WUSB11 V2.6) to work under kubuntu /ubuntu.

I am still not able to connect. I believe that I am overlooking or not understanding something.

This is a walk-through of steps I have taken. I can post log files or command outputs as needed.

lsusb shows my adapter, I checked at one point and saw the log file said it needed the firmware from at76c503a.berlios.de so I downloaded the at76_usb-firmware.tar.gz file and copied the at76c503-rmfd.bin file to /lib/firmware and ran chmod 755/ chown root:root as the instructions said.

I then ran rmmod -f at76c50x_usb followed by at76c50x_usb. iwconfig now shows my linksys adapter as wlan1. I use ifconfig to bring the interface up and then set the essid (not hidden) with iwconfig. I then use dhclient to try and get a dhcp address, but no luck.

I have tried setting the wireless mode to managed and setting the ap with the cell address of my wireless router. Still no luck. I continue to the get dhcp no offers report.

I have read that I need to shutdown network-manager if configuring by hand. I did this with service network-manager stop. it doesn't seem to get an address either after this.

Checking the output of messages, kern.log and syslog I get wlan1: link not ready and if I set the ap by hand. I get that it can not associate

Here are some other things that I have noticed and wonder if it is a problem:

lshw shows my wlan1 interface, it shows a loaded driver but gives firmware = N/A (this is after copying the firmware file to /lib/firmware) (log files seem to indicate firmware version)

After setting the ap manually with iwconfig, iwconfig output still shows that the access point is not associated. I am not sure if it is supposed to show the cell address after manually setting it or only if it is connected to the router.

I am running kubuntu 10.10 and I am trying to connect to an open router.

View 9 Replies View Related

Ubuntu Networking :: Connected To Wireless Router, But Can't Connect To Internet?

Aug 2, 2011

I think something weird is going on. On a fresh installation of 11.04, I seem to be connected to my router just fine, but I can't reach the internet or anywhere else on my network. Anybody see my problem from what I've posted? The computer is only connected via wireless (so I don't know why eth0 would be connected as well). I can't think of what I'm missing...My system seems to be connected to my router on two interfaces. "ip addr" gives:

Code:
1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

[code]....

View 9 Replies View Related

Networking :: Cannot Connect To Router Via Wireless - Connection Failed

Jan 6, 2011

I've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.

I then tried doing all the following:
Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise
Changing the SSID, broadcasting to ON, changing the SSID name
I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.

My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.

I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says
Problems occurred during the network connectivity test
This can be caused by invalid network config or problems w/ your momde / router
Reluanch, etc.

I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!

View 1 Replies View Related

Networking :: Cannot Connect To Internet With AT&T 2WIRE Wireless Router

Oct 4, 2010

AT&T will not help. I am trying to connect with Cable (CAT5). When I try to configure my network card with YaST here is the message received. "Unable to configure the network card becasue the kernal device (eth0, wlan0) is not present. This is mostly cause by missing firmware (for wlan device) See dmesg output for details"

View 2 Replies View Related

Ubuntu Networking :: No Internet Connection Mint 8 - Won't Connect With My Wireless Router

Feb 12, 2010

I have just installed Linux Mint 8 to an Asus A6000. My problem is that the computer won't connect with my wireless router. I have tried with MAC-adress and such, but still no respons. I also tried to connect with a cable to my modem, but no response there either.

I think I may lack some drivers, to what I think is Broadcom b43, but I am not sure. I tried to download the drivers on my other computer, and transfered them to the Asus. I managed to install 2/4 drivers, but on the two others, I get this message "Failed to fetch ... Couldn't reach archive.ubuntu.com"

View 2 Replies View Related

Ubuntu Networking :: Fails To Connect Vostro 1720 To Wireless Router?

Oct 7, 2010

I'm trying to find out why the wireless access point at work most of the time won't let me connect to the network. I'm using Ubuntu 10.04 on a DELL vostro 1720. The router model is D-LINK DIR-655. lspci gives me: Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01), and I'm using Broardcom STA drivers.

If I try like 10-20 times to connect I will often finally get connected and once connected everything works fine for the rest of the day. The only router I'm having this problem with is this one. In the log below, the last lines is a connectionattempt that succeeded and all the lines above those are several attempts that failed. It seemes like there is some kind of timeout issue but I'm not sure what and how to fix it.

The syslog for the connection attempts are (I have marked out MAC adesses and public ips with *):

[Code]....

View 3 Replies View Related

Ubuntu Networking :: Wired Ethernet Connection - Unable To Connect To The Internet Or My Router

Dec 5, 2010

I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved