So I'm having DNS issues (with my router it takes too long to resolve) with 9.10. If I'm using GNOME I can just change the preferences. But where do I find those preferences on the filesystem?
I modified /etc/resolv.conf to just use Google DNS and it works great, but then something overwrites it with my router DNS. I guess that's a generated file, but what do I edit to change the generator?
I installed Natty assuming Unity replacing gnome pretty much just moved the top bar to the left side.Was I wrong! I can't seem to find preferences and administration to set up anything. I did manage to install unison so I can start copying my file from my other system. But unison seems to have been installed in a new location. Not sure if I installed it correctly as I couldn't find administration so I used the software center. I need to install my I can't even start nautilus to locate its new location.Even starting a second firefox takes extra clicks.I guess what I need is a guide to this new system.I have been using since 5.04 and this new release has me totally lost.Is there a guide to show the differences? And how to do common task?I was able to setup SSH to view files on my other system so I can start copying them. But I wanted to use Unison this time to do it. But I don't know where to install the .prf files.So I need an intro to do common task with unity.
View 2 Replies View Relatedi got a problem with my Ubuntu 10.04 LTS the sound was working just fine before but now i can't find the hardware (sound card) in preferences.the sound is working just fine in my profile but not in other two.
View 1 Replies View RelatedThe problem is that banshee mutes sound for other apps like flash, the solution is to select alsa for the devices in audio preferences... but don't have that in the list, only "internal audio analog stereo".
This wasn't a problem until i made some updates and got broken sound, to fix it i used the AlsaUpgrade script. I'm using Ubuntu 10.04 by the way.
I have to use alsa for audio to work under wine (otherwise pulseaudio starts eating up processor cycles and the audio comes out horrible and distorted), but I have been unable to use the mic. The mic boost is up on the alsa mixer, and they are not muted. I cannot find any options under my system menu for Sound Preferences (which seems to get references in a lot fo help forums), or anywhere else to determine which audio driver the line in on the front uses.
I'm using an Acer laptop from a couple years ago, so support should be no problem.
On my system, System->Preferences->Software Updates, as best I can determine, completely ignores the "Check for updates: " setting. It looks as if, regardless of what I set, I get daily checks. Is anybody else experiencing this? Anybody got a fix? I like the idea of having the system check for me, so I don't want to just pitch the program.
View 3 Replies View RelatedHere is my problem. Grub2 outputs error: unknown filesystem. Then when i use "ls" command it outputs this:
(hd0), (hd0,4), (hd0,2), (hd1) and when i "ls (hd0,4)/ or any of them it says: error: no such disk
So, heres my story. I dual boot vista and ubuntu from my main 320GB hdd. Today i tried to fresh install 9.10 on a different external hdd. The 500GB hard drive already had two partitions, a 30GB Fat32 and the rest NTFS. both of these partitions had about 17GB used on them. I installed off a cd and i shrunk the NTFS to allow for more partitions. I made a 4gb swap as logical at the end then a primary ext4 / partition in front of it. The drives are Fat32 sdg0, ntfs sdg1, then an sdg3 (which im confused about and says is extension), and sdg4 (with linux) and sdg5 (swap). When finished with the partitions it asked me to select where to mount the ntfs and i said /windows. When i tried to boot up it did not recognize my external apparently because it was plugged in via firewire. I switched to usb and it booted but then i got the error message in grub. Also, when i switched from firewire to usb the drive changed from sdb to sdg. How do i fix this problem? Will reinstalling ubuntu fix this? Is there an easier way? I tried reinstalling grub but it did not work.
When i connect my mp3 player to my computer it creates a "drive/folder" for it on my desktop and places it in my Place menu.. but i can't find the mp3 player in the /media folder. Does anyone know why this is? or where i could access the mp3 like a normal folder?
View 1 Replies View RelatedI'm trying to install netbook remix on my out-of-the-box 1005PE with windows 7. I used LinuxLive USB Creator 2.4 to put the netbook remix file onto my usb device. I get to the part where I choose whether I want persistent mode, live mode, installation or a few other options. I chose installation. Here is what I see on my screen starting a little before where I think the error is:
Begin: Running /scripts/casper-premount ...
Done.
Done.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built-in shell (ash) Enter 'help' for a list of built-in commands. Unable to find a medium containing a live file system I've tried the whole process several times. I've tried redownloading the netbook remix file, reusing LinuxLive and trying Unetbootin-windows-433.
I am currently running Jaunty 9.04 and find the xorg.conf in /etc/X11. I just booted Lucid 10.04 from the Live CD just to take a look at things. I could no longer find xorg.conf any place in the booted file system.
View 1 Replies View Relatedwhen I start my laptop (Ubuntu 10), it even doesnt offer log in and writes this:mount: mounting/ proc on / root/ proc failed: No such file on directory Target filesystem doesntt have sbin/init. No init found. Try passing init=bootarg.device scan complete, Attached scsi generic sg2 type 0I tried to restart it several times, but it shows the same. The evening before I used it to show some files on projector and after I disconnected my laptop from it, it was a bit slower, but working. And the next morning I get that message. As I just started with Linux,
View 3 Replies View RelatedIam pretty new to Linux.I installed fedora 10 on my pc recently.I wanted to add a program to the startup menu but I cant find Preferences menu in the Settings menu. Iam writing to this form after a lot of googling.Hope I can find some answer here
View 2 Replies View RelatedI've been playing around with an old laptop and a hand full of Linux distros. I found that each Linux has a kernel "vmlinuz" and a initrd "initrd.gz" no matter how you boot the distro it uses these to files. I have CrunchBang Installed on my laptop I put a copy of the ubuntu live disk in the location
/home/user-pc/ubuntu/
I added a new boot option for grub It looks like this
Title Ubuntu
kernel /home/user-pc/ubuntu/casper/vmlinuz
initrd /home/user-pc/ubuntu/casper/initrd.gz
This boots like a normal cd only problem is while its booting it tells me it cant find the file System. This happened for every single Linux distro I tried to boot. Is there something I am missing here is there a way to tell the boot peramiter where the file system is I think what it means by file system is the "filesystem.squashfs" file.
I have 2 questions
1. Is there anyway to tell the grub loader that this is the file system. To make the live CD boot properly.
2. How do CD's work is it not the same?
I am facing a strange problem in my server, One of my filesystem shows as 3.1G when I execute df -h command and the utilization shows as 83%, but when I cd to the directory /usr/local I could not find any huge files in that filesystem and I have searched for hidden files as well,
groupserver:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda9 3.1G 2.5G 532M 83% /usr/local
groupserver:/usr/local # du -sh *
0 bin
93M abinav
[Code]...
I have successful tar an existing CentOS 5.2 partition from Fefora10. The idea is to move a working CentOS 5.2 reside in an internal hard drive to a portable hard drive. I know how to edit a stencil in menu.lst to boot the clone CentOS5.2. During boot, I encountered
Red Hat nash version 5.1.19.6
mount: could not find filesystem /dev/root
setuproot: moving /dev failed No such file or directory
setuproot: mounting /proc: No such file or directory
setuproot: mounting /sys: No such file or directory
[Code]...
I've decided to give ubuntu another test drive now that I got a bigger and better desktop. I downloaded the latest version of ubuntu, loaded it into my usb stick and booted from it. I then clicked on the install icon on the desktop to start the installation. Everything was going ok, until I came to the partitioning part. I had already (on windows 7) created a separate partition for ubuntu which is 56GB. So I chose "manual partitioning" and selected the ubuntu partition as /home and began the installation.
Everything seemed to have went well, the window suddenly closed and then nothing happened. I waited for 15mins and still nothing happened. I decided to restart and see what happened, but I discovered that I couldn't boot into windows anymore. It said something about intel boot manager cannot find filesystem. So I decided to boot back from the usb and see if I can reinstall ubuntu, I came to the partitioning part and all the drives were gone, I couldn't see anything, it was blank.
i made a live usb stick with a original live iso image of f10 following carefully instructions of fedora support comunity once i finished i had tested it and i had the same problem (warning can not find root filesystem create symlink /dev/root and then exit this shell to continue the boot sequence, bash: no job control in this shell) of the following person:
View 2 Replies View RelatedI am trying to boot Debian Live, using Grub, from a folder on my hard drive which is basically the contents of the iso.
Here is my menu.lst:
However, on boot, after a while, it says boot failed. The error message it gives is: "Unable to find device with live filesystem" or something similar.
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
Every time I open "sound preferences" from either the sound applet or the preferences menu pulseaudio CPU usage goes right up to 100% and proceeds to lock up the entire computer. pavucontrol, paman, and all the other pulseaudio utils work fine, except for ubuntu's sound preferences. It affects a new account.This is my 10.04 desktop that is affected. I have just the default pulseaudio config.
View 3 Replies View RelatedInstalled smb4k on a fresh install of 11.04. When I tried to save the changes after setting up the preferences in smb4k, I got this error message: Configuration file "/root/.kde/share/config/smb4k_sudowriterrc" not writable. Please contact your system administrator. The file does not exist. There is only one file in the directory: kdebugrc I have smb4k successfully running on an EEE 1201PN with 11.04. Seems crazy but when I check this machine, there is no directory in root .kde.
View 2 Replies View RelatedSpecifically, I'd love to know what the valid values of:
And, where I can find this information? I've always wondered if it was documented somewhere, or if there was an interface into the kernel to query for it.
I'm relatively experienced with UNIX and Linux, but this has me thrown for quite a loop, and it seemed like such a simple question. How would I go about finding the newest file in a file system? I thought something like:
Code:
ls -ltr `find /usr -type f`
would work, but I seem to be exceeding the argument maximum for ls:
ksh: 0403-029 There is not enough memory available now
I thought something involving xargs might work, but I really suck with that command.
I'm logged into a server through the CLI and did a df -T and confirmed all my volumes are ext3. but when I do a tune2fs -l /dev/sde it tells me
tune2fs 1.39 (29-May-2006)
tune2fs: Permission denied while trying to open /dev/sde
Couldn't find valid filesystem superblock.
I don't have root access on the server, but is that why it's complaining, or is my syntax incorrect?
The IP address acquisition problem I reported earlier has returned, and I am stymied. To recap: Ubuntu 9.10 would not obtain an IP address via a wired Ethernet connection. I resolved the problem at the time by configuring eth0 in /etc/network/interfaces:
Code:
auto eth0
iface eth0 inet dhcp
and disabling Network Manager in Preferences > Startup Applications.After a powering down the PC today, the problem has returned. It appears that dhclient cannot obtain an IP address. This is true whether I am connected to the router (a Linksys WRT54G running Tomato), or directly to the DSL modem. When my usually wireless Ubuntu 9.10 laptop is wired to the router, it obtains an address almost instantly. I have made no changes to the network configuration since January. I have tried to keep current on Ubuntu updates.
Code:
jgb@alienware:~$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:30:1b:ac:5b:9e
inet6 addr: fe80::230:1bff:feac:5b9e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
I am trying to install I get some sort of error relating to the hard drive, on ubuntu it's that it can't find an active filesystem, on XP it blue screens and tells me to run chkdsk. I've tried with a few different hard drives, all of which allow me to boot into the already installed OS fine, but give me the exact same error when trying to install an OS. After playing around taking the hard drives in and out and reformatting them it will occasionally get past the problem, but not without a significant amount of screwing around, and if I don't install on that occasion and just restart without changing anything the problem will reappear.
View 2 Replies View RelatedI have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
I have a CIFS share mounted from the "Places" menu and it is accessible from the desktop.I am unable to find its location in the filesystem using "mount" Where does it get mounted to?
View 1 Replies View RelatedUnder Linux, I'm looking for a command to list the biggest file and/or the biggest directories under a directory.
View 3 Replies View RelatedI want to upgrade kernel to 2.6..36 from 2.6.18 of CentOS 5.5. The make process is successful but prompt "could not find filesystem /dev/boot " after reboot.
Some articles suggest to edit file .config and set CONFIG_SYSFS_DEPRECATED_V2 to 'y' and re-make kernel. However, the problem still stand there after reboot again.