I have 2 computer 1 with a ubuntu 10, one with windows 7. I can access the windows 7 computer from Ubuntu, and see all the documents. However I can't access \SAMBA24 which I assume is the Ubuntu. What do i have to do ? I'm a complete beginner at this.Windows 7 can't find networkpath, and Ubuntu says fail to retrieve sharelist from server.
View 9 RepliesI'm trying to design an inexpensive large scale DNS server but fail to find any metrics or methods to base scalabilty.Can anyone offer information on building a stable dedicated DNS server? That might be able to scale well.
View 8 Replies View RelatedI loaded 9.10 version on a test pc. Immediately after the installation and reboot, all of the windows PC's and NAS drives I have (13) showed up under network in Ubuntu. I then proceeded to assign static addressing and loaded updates, Then I couldn't see the windows machines anymore. And this was BEFORE I started modifying the smb.conf file. My Windows workgroup name is not "workgroup". It's odd that all the Win PC's and NAS drives were visible from the out of the box 9.10 install....
View 1 Replies View RelatedWeird. I connect Windows to Ubuntu Server but not Ubuntu to server. I am able to connect my two windows (7 and vista) to Samba/UbuntuServer and browse, cut, paste, etc. However, I can't for the life of me connect with my Ubuntu machines. I get to the stage: "Opening Workgroup" and then I get unable to mount location. Failed to retrieve share list from server.
View 9 Replies View RelatedMy flatmates just set up a windows server to share media. If I use nautilus, I can see something called "Windows Network". But if I click on it, or try to open it, I get the error message: "Failed to retrieve share list from server". I have nautilus-share and smb installed. How do I now actually connect to a windows shared folder?
View 1 Replies View RelatedTrying to share files between Ubuntu 10.04 machines has become a continuing nightmare; it has been going on ever since the launch of 10.04.
I have worked my way through every post and howto I can find in this forum, but without success.
I have 3 machines in my home network; 2 are on wired connections and one on wireless. Each machine dual boots Ubuntu 10.04 and Win XP.
When all machines are in XP, everything is fine. When all machines are in Ubuntu, the reverse is the case. On some I can see the other machines; on others I can only see "Windows network". In all cases, clicking on any of the icons that emerge from Places>Network, I get the "failed to mount....failed to retrieve share list from server."
Along the way, I have changed /etc/samba/smb.conf so often that I have now done a clean reinstall of Ubuntu on each machine and a clean installation of Samba. The problem remains.
I have a few specific questions, the answers to which might just lead me in new directions
1. In the smb.conf file, should the "Netbios name" entry be the name of the machine itself or the name of the Ubuntu machine that you wish to be the server.?
2. Should there be a different entry for WINS support yes/no for server and clients?
3. Many of the howtos take you to /etc/init.d/samba to start and stop samba; but that folder is not present on any of my installations. Is that OK? Do those instructions only apply to earlier versions?
4 I am totally at a loss over the WINS server entry, and what w,x,y,z are meant to be replaced with
When i open my network all my computers and other terms show up but when i click on them all i get is cannot mount failed to retrieve share list from server im running ubuntu 10.10 and gnome i thought i had samba4 all installed what else could i be missing.
View 1 Replies View RelatedA few days ago I got this Ubuntu box (9.10) to connect to the Windows network in our house. Sharing printers and files. Life was good. But today, Places > Network > Workgroup tries to connect for about a minute then I get a "Unable to mount locations, Failed to retrieve share list from server" error. The only thing I recall changing at around the same time was adding Wine.
View 6 Replies View RelatedI have been using Ubuntu sense about 6.10 and never had to network with a Windows computer before. I have a decent understanding of Linux itself but I am having issues with this samba client. I have a clean install of Ubuntu 9.10 and am trying to use samba to access my shares on a Windows XP(SP3) computer. I am on the network just fine, and all the computers on the network have static IP addresses. When I go to Places->Network->Windows Network I see the "TITANNET" workgroup, (Even before I changed my workgroup to "TITANNET" in the smb.conf file.), but when I try to access it I get this error:
Code:
Unable to mount location
Failed to retrieve share list from server.
P.S.[0] I tried using /etc/init.d/samba restart but it did not work, I am not sure I am even running the samba server. (Well, it is obvious I am not, what I really mean is what am I running to (not =D)access the shares on my Windows PC.)
P.S.[1] I know that this has probably been posted before. I have searched and searched, I am about 1.5 pots of coffee and 4 hours into this.
I keep getting this, ever time I try to map a shared drive on other systems with my small network. 'unable to mount location failed to retrieve list from server'. This used to work.
Main System UNBUNTU 10.10, GNOME ver. 2.32
Sys2 Windows XP Pro, SP3
Sys3 Windows XP Home SP3
[code]....
Mine is used as a server for the above, and also for me to work on. For some reason, I keep getting permission failure. Setting up a share on sys2. sys3, sys4, sys5 can see and read it. My main sys cannot. None of the systems can see the Main one & the main one cannot read any of the others.
Chain ufw-after-forward (1 references)
target prot opt source destination
Chain ufw-after-input (1 references)
[code]....
My network was running happily with no problems. After clicking "Places," then "Network," I double-clicked "Windows Network." My wife's laptop appeared merrily ready to be clicked. I browsed through and accessed the "Public" folder. Ubuntu auto-mounted the "Public" folder on the Windows Vista machine to the desktop.
THE REASON:I wanted to change the icon to a disk so it would mimic a "mapped" drive like in Windows. I right-clicked the shared folder mounted on the desktop, clicked "Properties," and then clicked the picture of the folder. I then clicked through to "/usr/share/icons/Human/scalable/devices" and selected the "drive-harddisk.svg" icon. The icon changed and I could still browse. I unmounted and re-mounted the folder with no problems, then changed back the disk to the regular folder icon.
THE PROBLEM: After restarting the computer, if I click "Places," then "Network," then double-click "Windows Network," I'm greeted with the following error message: Unable to mount location. Failed to retrieve share list from server.
WORKAROUND: Opening Firefox and typing smb://IP-of-wife's-laptop shows the share list. I can open and access the "Public" folder no problem.
It seems this is a common problem. I used Samba to configure and connect the computer running Ubuntu 11.04 with my Windows Visa workgroup. This is a wired, not wireless, connection.
In Ubuntu, under Network, I can see the name of the other computer (NOVA_MORAI), but when I click, I get the error:
Unable to mount location - Failed to retrieve share list from server
I tried the nmblookup command, here is the output:
eleos@Planet-Morai:~$ nmblookup NOVA_MORAI
querying NOVA_MORAI on 192.168.1.255
192.168.1.2 NOVA_MORAI<00>
And:
eleos@Planet-Morai:~$ nmblookup -A 192.168.1.2
[Code]....
There it it. But when I try the findsmb command, it does not show up.
The error message seems common, but I have been trying solutions all day, and I am still not getting a connection.
New ubuntu desktop user here. I've been working with Ubuntu servers for over 3 yrs, using Windows as clients. I have OpenVPN running on an ubuntu 10.04 server, and it has worked well with Windows OpenVPN clients connecting. I took those same settings and applied them to this new install of Ubuntu 10.04 Desktop, and now openvpn seems to be failing when we get to the routes (I wrestled with the network-manager "secrets" issue for hours, but that works now).
I performed the following:
sudo openvpn --config fogbank-ny1.ovpn
--all is well, we're connecting/yay then *screech* FAIL--
Code:
Sun Jul 18 07:17:14 2010 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.0 255.255.255.0,redirect-gateway def1,dhcp-option DNS 10.8.0.1,route 10.8.0.0 255.255.255.0,topology net30,ping 30,ping-restart 600,ifconfig 10.8.0.10 10.8.0.9'
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: timers and/or timeouts modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: --ifconfig/up options modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: route options modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sun Jul 18 07:17:14 2010 ROUTE default_gateway=192.168.10.1
Sun Jul 18 07:17:14 2010 TUN/TAP device tun0 opened
Sun Jul 18 07:17:14 2010 TUN/TAP TX queue length set to 100
Sun Jul 18 07:17:14 2010 /sbin/ifconfig tun0 10.8.0.10 pointopoint 10.8.0.9 mtu 1500
Sun Jul 18 07:17:14 2010 /sbin/route add -net <mypublicip> netmask 255.255.255.255 gw 192.168.10.1
Sun Jul 18 07:17:14 2010 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.9
SIOCADDRT: File exists
Sun Jul 18 07:17:14 2010 ERROR: Linux route add command failed: external program exited with error status: 7
Sun Jul 18 07:17:14 2010 Initialization Sequence Completed
I am using the suggested openvpn routes. If I connect from Windows (actually the .ovpn file is taken directly from the working windows machine).. all is well, routes work fine all traffic is routed thru the VPN -- same way it's worked for over a yar. I assume that this is what is causing networkmanager to fail as well. those logs indicate that it has connected to the vpn, but is probably stopping when it gets to routes.
My network has several machines on it. They are all connected to a single router. Two of the machines are running Windows Vista, one Windows XP and one Fedora 11. When I go to places.network, I see an icon that says Windows Network. If I click on it, I get the message: Unable to mount location, Failed to retrieve share list from server. When I had Ubuntu running on this machine, I had no problem seeing and connecting to the Windows Vista machine.
View 11 Replies View RelatedI have been having off and on issues with my samba file shares. I am sharing a NTFS formated hard drive where the mount point is in my home directory, as well as a printer connected via USB. I am to the point where printing works (using it as an ipp print share, samba is configured for it, but I don't know if it works or not), and I can access the shared folder from Windows, but I can't access the shared folder from any Ubuntu machine. I get the error:
[Code]....
I'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
Is it possible to do jboss application server fail over by using heartbeat on rhel5?
View 1 Replies View RelatedI'm running Fedora 14 and when I'm surfing the web, it seems to lag in between pages. I don't think its my net connection, I just wiped windows 7 off my system for Fedora and it did not suffer from the same lag issues.I've tried adding in google's alternate dns server 8.8.8.8 but it didn't seem to fix the issue. I ran into this issue a couple years back on Ubuntu 8.1 or something like that, and I never could find out what I needed to configure.My second problem is that when I try to connect to other Windows systems on my wlan or wired connection, it gives the error "failed to retrieve share list from server". I'm not experienced in networking, can someone explain this to me?
View 1 Replies View RelatedI am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
We're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
On a remote system, when all you have is the ssh CLI -
How do you find out the ip addresses for:the Gateway
the DHCP server
the DNS server
Don't need to make any changes.
Which commands will display this info?
I look and look and it doesn't tell its name and whom made it so one can go there and install it on Firefox or whatever.
Have tested many of the addons for FF but none is as good as the one in Debian Elive 2.0 the unstable Elive don't have it. Ubuntu doesn't either.
Searched Debian and Elive sites and used google but fail to find it.
Could it be Shutter program that doesn't advertise itself?
Shutter is supposed to be a good screen grabber.
This screen grabber is activated by pushing the PrtScr button and not by clicking a symbol as the others are. So maybe it is built into Elive itself but not mentioned anywhere?
I want to use it on Elive 1.9 Zeitgeist.
I am attempting to upgrade Fedora 12 to 13. I get an error screen that said root could not be found. Four options are given. Not sure exactly their wording, but two appear to allow you to cancel the other two warn that if you reinitialize you will wipe out all data.
I have a Vista partition and a Fedora partition. I've added the vista ntfs partition to fstab with no help. All of the partition use the long UUID form. I added the root location (root (hd0,5) to the upgrade menu item in grub.conf and that didn't work either.
I'm reluctant to proceed for fear of initializing the entire drive. I could live with installing Fedora 13 over the existing partitions.
So I'm building a custom kernel cuz I want the fbcondecor patch in my kernel. I use the same .config that 2.6.32 debian kernel package comes with. This kernel runs perfectly. I pass --initrd to make-kpkg when building the package but no initrd is built when I install it so I have to make it using "mkinitramfs -o /boot/initrd.img-2.6.33 2.6.33" to get it to boot. Now when I try to build the nvidia drivers it complains it can't find the source. I did build kernel_headers and installed them also the source is in /usr/src/linux. I also tried to specify the path by passing --kernel-source-path= to the nvidia script but no change. What is going on? I've done this fifty times before and never had any problems. Has there been some changes to how debian kernel packages are built? EDIT: Just thought I'd add some info about the steps I took.
Code:
tar xjvf linux-2.6.33.tar.bz2
ln -s linux-2.6.33 linux
cd linux
patch -p1 < ../fbcondecor-0.9.6-2.6.33-rc7.patch
cp /boot/config-2.6.32-trunk-686 ./.config
make menuconfig Loaded .config then I removed support for maxtorfb, tile blitting and some sirrusfb thing, nothing thats relevant to my system. Changed cpu from Pentium 4 to Core 2 and added framebuffer decor
support from my patch, exited and saved. Then:
[Code]....
EDIT2: I have now tried to build 2.6.32.8 in the same way with the same strange results, anyone have any thoughts as to what I'm doing wrong just throw it at me, I'm getting desperate and running out of ideas. I've checked all the kernel source symlinks and everything looks good.
Firefox 3.1 beta 3 won't load. When I open the application, the little bouncy icon bounces, and the task manager shows "Firefox Web Browser", but this only stays this way for about 15 seconds then just goes away. No error or anything.
I've had this identical problem when I try to open certain programs with Wine too. Is there some place I can find a detailed error report on these failures?
I want to retrieve emails from my POP3 servers to my home server. But from there, I want to be able to access them via IMAP from my other computers, i.e. desktop, laptop, phone. And then of course I want to be able to send emails from said devices via IMAP to my home server which POP3's them out to my mail servers. Basically, I have a few POP3 accounts with various hosts and I want to conveniently interact with them from lots of devices using my preferred software (i.e. Mutt, or Thunderbird on my Windows boxes). My home server is Ubuntu Server if that's relevant.
View 6 Replies View RelatedI've got a DNS problem I cannot figure out. I've been digging and pinging all day and I've waited for caches to expire and I'm not having much luck.From my desktop mac, I can't seem to resolve mail.port-o-call.net:
Code:
My-Mac:~ sneakyimp$ ping mail.port-o-call.net
ping: cannot resolve mail.port-o-call.net: Unknown host
[code]....
I want to know the time on a server accurate to the millisecond.there's this way:
local $ ssh user@servername
Welcome to server!
server $ date
Fri Feb 18 11:27:50 EST 2011
But I need more accuracy. Is there a command that will be more precise?
Have anyone try the latest Debian 5 iso CD? I got installation problem. It is the select and install software stage. If I select only
Code:
[*]Desktop Environment[*]Standard
I want to select web server, email server, the installation fail.
I have installed Mediatomb on my ubuntu server as instructed. I can use the Webinterface and so on, but i cant find ther mediatomb server from my Samsung TV.
View 2 Replies View Related