Ubuntu Networking :: Somehow Port 80 Is Being Blocked?
Apr 27, 2010
So I set up an Ubuntu 10.04 server with apache2 installed, but for some reason I can't get to it from my browser. the iptables have all changed directories in 10.04 so I can't find the iptables. Apparmor wasn't the problem. The network hard ware is not the problem.There is something inside of 10.04 that is blocking port 80. I can ping it all day using the ip address but when I ping it useing http://ipaddress it can't find the host
View 4 Replies
ADVERTISEMENT
Mar 25, 2010
I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
View 2 Replies
View Related
Sep 18, 2010
I can't seem to establish a conncction to my site (that I'm hosting in the same computer as the gFTP client- running Lucid Lynx desktop as a server). My site is 'out there', with a domain etc. and also I work on it with localhost. I wanted to use ftp as Joomla has a 'ftp layer' for files permissions etc. But it keeps saying that I can't connect, or the connection 'was reset by a peer' whatever that means. For 'hostname' I use site.com (site is my site's name) and even tried the whole thing like http://www.site.com (I clicke on 'connect to remote, and enter that in the url). or just put it where 'host' goes (when I'm not using localhost) For user name and pass, I just enter what I usually put to access the administrator's back panel in joomla, but maybe I am supposed to use what I use to log on to ubuntu when I start my computer? note sure. Anyway I used a telnet command in the terminal and found that port 21 was blocked. MY isp says they don't block any ports so I don't know. I was able to do this last year so I don't know what is so hard about this lol In the router, I have 'ftp 21 to 21 and ip address 192.168.1.100 (ip is the same for http which is working as I have my site up) now it seems to be open as I used a command at the terminal (found from google). It's open but my ftp still can't connect to my server either localhost or to my site. there is no firewall blocking it and I think my router is set right.
View 1 Replies
View Related
May 17, 2010
Last night I installed all the updates that were available for CentOS. Today, I discovered that all connections to port 25 (Sendmail) are being blocked except connections coming from localhost.
I tried disabling the firewall to see if anything would change but it is still blocked.
If it is not the firewall doing the blocking, what else might it be?
View 4 Replies
View Related
Jul 10, 2011
Recently I discovered that we were accidentally running a POP server (port 110), when we only should have been running the encrypted version thereof (port 995). This wouldn't have been a problem if the port was blocked in the first place.Isn't the default iptables setup on CentOS to block unspecified ports? Specifically, this line from /etc/sysconfig/iptables
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
Right? Well, this doesn't seem to be working for me. I added some rules to allow additional ports and commented out a couple (crucially port 110), but for some reason, port 110 is open.Here is /etc/sysconfig/iptables and the output of iptables -L below that:
# cat /etc/sysconfig/iptables
# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
[code]....
Why isn't "-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited" doing what I think it should be doing?
View 3 Replies
View Related
Aug 12, 2011
I have a vps server running certain services which can be accessed via a web browser (e.g webmin control panel), but I have recently been unable to access these services from my home machine using Firefox 5.0, running ubuntu 11.04.
Example:
I can access the server on port 80 fine, eg: [URL]
However I cannot access my webmin control panel on: [URL]
The pages takes ages to load and then times out. Same with transmission-daemon on: [URL]
Everything is set up fine on my server, the ports are open in firewall etc. and I can access these pages fine from my work computer.
This has only started happening in the last day or two and had been working fine up till then. I have not messed around at all with the firewall on my home machine. I have tried other browsers besides Firefox with same result.
View 4 Replies
View Related
Oct 21, 2010
VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
View 2 Replies
View Related
Mar 28, 2011
So I have two ssh servers I connect to regularly that do not use the standard port 22, so I use the "-p" flag to connect to them. This works flawlessly EVERYWHERE except on my girlfriend's work network. When I am on that network (same laptop), I can ssh into servers which use port 22, but not the other servers on this alternate port.Is there any way OTHER than ssh'ing into a machine I can access and then ssh'ing again from there to my destination (which, by the way, does work)? I want to make a direct connection for speed and security reasons.
View 2 Replies
View Related
Jan 20, 2010
I get today a server with CentOS.. and someone told me to block access to port 22 for all IP's except my.. so I did
Code:
iptables -A INPUT -p tcp -s my_ip --dport 22 -j ACCEPT
and after
[code]...
View 7 Replies
View Related
Jan 28, 2011
I have Linux server (centos) in my company , Network is shared through this linux squid proxy server to Windows client .
How to open port 995 and 587 for Windows client because Outlook are not working in Windows Client ...
How to open this port for Windows Client.
View 4 Replies
View Related
Jul 4, 2009
I have a fresh installation of CentOS 5 I'm using for a server, and I'm having issues with port configuration. I have iptables running, and it started with no /etc/sysconfig/iptables file. I added a few basic rules (port 53, port 10000 for webmin), saved the file, and restarted the service. I tried connecting to webmin, scanned ports, and traffic was blocked. I set iptables to allow all traffic and restarted the service, and it still showed basically every port as being blocked. It seems port 80 and port 22 work for some reason, even when I tell iptables to block all ports.
I'm not sure what's going on here. Iptables is reading the /etc/sysconfig/iptables file, and if I use lynx localhost:someport it responds as it should according to the file. However, if I try connecting by IP, it's like there's some other firewall or something running that does whatever it's configured to do.....
View 2 Replies
View Related
Oct 11, 2010
Strange issue here when trying to verify firewall on Server 8.04. No ftp service running at all on server, but both nmap and netcat report port 21 as being open, even though it isn't.I am 100% sure that port 21 is not actually accessible and iptables rules are fine. Trying to connect to the port fails, yet nmap and netcat seem to report a "false positive"?Have also checked on a number of other servers I'm running, and this "false positive" seems to apply to all of them.
View 1 Replies
View Related
Apr 12, 2010
I installed Ubuntu 9.10 and tomcat 6 java servlet container. I am trying to run the tomcat server on port 80, so I edited tomcat's configuration file (server.xml) and changed the default port from "8080" to "80". I launched tomcat server, went to my browser and entered:[url], but it says can not find server/location. Then I edit the server.xml and revert back to port "8080" and then enter: [url] and everything works fine. So my guess is some other service is taking up port 80, but I would think not, since I just installed Ubuntu and made sure apache isn't installed or running.
So I went to "System" --> "Administration", then choose "Network Tools". I then executed Netstat and did not see anything taking up port 80, but I do see port 8080 taken (assuming it is the tomcat server). Then I also did a Port Scan and entered my IP number. Again, I don't see port 80 taken, but do see 8080 being used.
I had a winxp laptop computer behind home wireless and was running tomcat 6 server fine with it, but it over-heated and died recently. So I got a used laptop and just installed Ubuntu 9.10. I have not changed my wireless router settings. It is the same as before. So I have ruled out my home's hardware/network equipment.
So here now I sit, wondering what is up?
For security reasons, is port 80 initially blocked by Ubuntu for some reason? Is there something I have to do beforehand to free up port 80?
View 2 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
Jun 12, 2010
I dont know how, but somehow all the ports on my comp appear to be blocked except for 24, for ssh and 5900 unknown. I can connect to the network, but as far as I can tell, I'm powerless to do anything. No webpages load, I'm typing this on my phone.
View 1 Replies
View Related
Jul 15, 2010
In my Ubuntu 9.04 installation, just a few days ago, I lost my usage of the internet. I still had internet access. Firstly though, there was a problem with the router, so I tried a friend's router (both Netgear DG834) and the friend's one worked. But in Ubuntu, I could not access any web pages or email. Skype works.
I tried using my netbook and that could access web pages okay. So then I booted my main PC into the old installation that I kept there of Ubuntu 8.04, which I am using now. And in this the internet works just fine, I can access websites and download and send email.
But in Ubuntu 9.04, it seems like something is blocking my access. I do not recall installing anything new, although something may have been updated recently. I can see the DNS servers from Ubuntu 9.04 and it gets an IP address from the router. What is the likely cause of the Internet being blocked for websites and email (but not Skype)?
View 2 Replies
View Related
Dec 8, 2010
I recently installed the XRDP server on my desktop edition of Ubuntu v10.04 following the simple instructions available here. I did this on two computers. One computer has Firestarter installed while the other does not.
When I use Windows to connect to the Ubuntu box without Firestarter, everything works just fine. However, when I try to connect to the one running Firestarter, I get a pop up showing an error message (see the attached file).
I checked the incoming rules in Firestarter and I don't see a way to add RDP sessions to the list of exceptions. I also tried adding my IP address in the host section but this too didn't help the situation.
View 1 Replies
View Related
Feb 13, 2011
I am facing an annoying problem with the wireless network of my university.The network is open, doesnt have wpa/wep, and once connected when requesting any page in the browser it gets redirected to a login page. Basically any pc running windows works fine, however if the os is linux-based than the pc connects just fine, it gets an ip, but the login page never loads. I have tried several browsers, several machines, even my android smartphone is locked out as well as all my friends running ubuntu, arch linux and others linux distros.The technical support never answered my email, and it's now 3 weeks that we are all without internet.
View 9 Replies
View Related
Jul 2, 2011
Recently My ISP provider blocked any kind of http proxies can be used in browsers. When I put my proxy settings in my browser, it keeps loading with no response. I've squid proxy running on my own server and worked fine before that modification.
View 3 Replies
View Related
Aug 7, 2010
When I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
View 2 Replies
View Related
Mar 2, 2011
All ports are blocked only 22 and 80 are open. I scan localhost and ports are open. When I scan IP address ports are blocked.I have no firewall rules.
View 5 Replies
View Related
Jul 14, 2011
I want to set my ip as static and port forward it through a specific port can anyone help me with this im using ubuntu 10 with 64 bit OS
View 1 Replies
View Related
Nov 28, 2009
The firewall in Fedora 12 seems to block UPnP by default, but opening port 1900 for UDP, as I have seen suggestedes not resolve the problem.have the following three scenarios:Firewall Enabled: Transmission cannot open a port by UPnPFirewall Enabled (1900 UDP allowed): Transmission cannot open a port by UPnPFirewall Disabled: Transmission opens a port via UPnP fineAny ideas? Yes, the port that I'm trying to open is also allowed. Router is a Linksys BEFSR41 v4.3, should you care
View 6 Replies
View Related
Feb 15, 2011
Fedora 13 64. NetworkManager tries to unlink /etc/hosts and is blocked:
Code:
SELinux is preventing /usr/sbin/NetworkManager from unlink access on the file /etc/hosts.
Additional Information:
[code]....
View 2 Replies
View Related
Nov 29, 2010
I connect to the internet at work through an authenticating proxy, and to avoid having to enter the proxy info into every app I use (e.g. firefox, wget, kde, etc) I have set up squid as a local transparent proxy which authenticates and routes all traffic to the work proxy. It has been working fine, but lately I haven't been able to connect to any https sites. I don't think I have changed the configuration, so perhaps it is the result of an upgrade, or something badly configured on my system from the start. I have tried connecting to https sites without squid and iptables and it works fine. My system is Arch linux, and my squid.conf file is: Code:
acl all src all
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443
acl Safe_ports port 80# http
acl Safe_ports port 21# ftp
acl Safe_ports port 443# https
[Code]....
View 2 Replies
View Related
Oct 13, 2010
In my work I am trying to connect my home server behind symantech gateway but I cannot but when I try to connect with telnet to ssh port I can make connection.How can I connect my server via ssh client.
View 11 Replies
View Related
Nov 21, 2010
I am in China, where some web sites(....., facebook, etc) are blocked. So I have to access these blocked site by VPN. But how can I access blocked sites by VPN and unblocked sites by my direct ADSL?
View 2 Replies
View Related
Apr 4, 2011
I'm trying to use iptables in order to forward all the incoming packets for port 5555 to port 5556 on the same server (192.168.2.101).
I wrote the following commands:
iptables -A PREROUTING -t nat -i any -p tcp --dport 5555 -j DNAT --to 192.168.2.101:5556
iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.2.101 --dport 5556 -j ACCEPT
View 3 Replies
View Related
Jul 22, 2010
https://hostname:8834/ is blocked by iptables ?
I have nessus application is running in the target machine and the url
is https://hostname:8834/ - which is not accessible
But when i login in the target machine via ssh and check that this application and the service is running fine So i think it is blocked by the iptables in the same machine, where the nessus is running
find the iptables status when iptables -L
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere tcp dpt:nessus1
ACCEPT tcp -- anywhere anywhere tcp dpt:nessus1
[Code].....
View 3 Replies
View Related
Feb 20, 2010
I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.
iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21
When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.
The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..
Here i my iptables script:
#flush table
iptables -F
#input regler
[code]....
View 6 Replies
View Related
