Ubuntu Networking :: Samba Share Listed Twice Under 'Removable Devices'
Jan 8, 2010
Since upgrading to Karmic, all my shares under 'Removable Devices' are listed twice...all was fine in Jaunty though, and I've done nothing to change them.Would anyone have an idea how to resolve this.In terms of what I see, there are all my shares with a white drive icon which, when clicked, do nothing. I then have all the same shares with a metal drive icon which open up the share when clicked.
I understand that the icons may look different, depending on what icon theme you're using, but the principal will remain the same.
View 9 Replies
ADVERTISEMENT
Oct 31, 2010
Where did they hide System->Preferences->Hardware->Removable Devices in Fedora 13?
View 7 Replies
View Related
Apr 25, 2010
I thought, that "Removable devices" module in KDE system settings supposed to automount removable devices. But when any removable media inserted, absolutely nothing happens.
View 6 Replies
View Related
Apr 27, 2010
Issue is, only way i can browse through the contents of for example a CD, is first opening it thourgh superuser Dolphin, and then i can open it with regular dolphin and konqueror.Same thing with a NTFS windows partition in the PC.I must first open it with superuser dolphin.
View 2 Replies
View Related
Jul 3, 2010
This is a 'clean' upgrade from slack 13.0 to 13.1 (32-bit)To qualify: / , /home , and /usr/local are on separate partitionsand / was reformatted.When I attempt to mount a removable device - USB stick or DVD, I get the following error message:
Code:
Rejected send message, 1 matched rules; type="method_call", sender=":1.134" (uid=1000 pid=6328 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error
[code]....
View 3 Replies
View Related
May 26, 2009
I want the following behavior in kubuntu 9.04 when I plug a device (USB stick or CD disk):
1. It should be mounted automatically for me. Now it isn't, though it appears in fdisk -l output: Code: Disk /dev/sdd: 8006 MB, 8006926336 bytes
16 heads, 32 sectors/track, 30544 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Disk identifier: 0x9b12d290
Device Boot Start End Blocks Id System
/dev/sdd1 * 16 30544 7815232 b W95 FAT32 and if I mount it manually, all goes OK
2. If I mount manually my CD disk and then press the eject button on my drive nothing happens until I manually unmount the drive. But I want it to open immediately
All this worked for me in kubuntu 8.10, and broke with the upgrade.
My fstab entries Code: /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdc1 /media/usb vfat noexec,codepage=866,utf8,nosuid,nodev,quiet,uid=1000,gid=1000,umask=077,user 0 0
View 9 Replies
View Related
Oct 27, 2015
I use Debian 8.2 without DE. I can mount removable devices (USB sticks, external HDDs) manually using mount/umount to specific folders under /mnt or /media. But I want them mount automatically when plugged-in as /media/disk-label. Also I want to be able safely remove already mounted devices without data loss.As I understand, I need to create custom UDEV rule and associate it with mount/umount scripts. E.g. mount script
Code: Select all#!/bin/sh
mount_point=$ID_FS_LABEL
if [ -z $mount_point ]; then
mount_point=${DEVNAME##*/}
fi
# retrieve gid of the plugdev group and set it as owner of mountpoint
plugdev_gid="$(grep plugdev /etc/group|cut -f3 -d:)"
if [ -z $plugdev_gid ]; then
[code]....
Is this safe and correct approach or it is better to use something else?
View 3 Replies
View Related
May 29, 2010
Quote:
Currently when I insert a removable device, it is auto-mounted as readonly. To use it I have to do this every time.
Code:
sudo umount /dev/xxx
pmount xxx
This applys to every removable device I have, and did not exist on my previous distro. Debian amd 64 Squeeze [URL]
View 5 Replies
View Related
Apr 26, 2011
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....
View 6 Replies
View Related
May 22, 2010
I am using ubuntu 10.04. I want to set up authentication to mount hard disk and other removable devices.
View 5 Replies
View Related
Mar 21, 2011
I want to devolep one "C/C++" program that will work as a daemon. My daemon will be running all the time, and whenever anybody attaches removable devices to machine on which my daemon is running, My daemon should catch that event and also should show me where that device has been mounted.
View 1 Replies
View Related
Sep 5, 2009
When I connect my Treo 650 with a USB cable it works sometimes and not others. A little investigation showed
that it always works when I see the Palm device listed in the output of lsusb. While trying to diagnose why it appears sometimes and not others, I discovered that it sometimes appears in /proc/bus/usb/devices and not
in lsusb. I didn't think that was possible!
I've tried running kudzu (the Red Hat hardware discovery tool) and killing and restarting udevd.
View 2 Replies
View Related
Jan 22, 2011
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
View 4 Replies
View Related
Feb 15, 2010
I have karmic on my laptop, and I can't access my windows network. I have had previous versions of ubuntu and managed to configure samba. However, since my last reinstall, I can't get it to work.
View 7 Replies
View Related
Mar 4, 2010
I am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies
View Related
Jun 6, 2010
When I create a new folder on my ubuntu machine and share it with my windows 7 machine using 'net usershare add <dir> <path>', I can't get write perms in Win 7. It keeps giving me a "You need permission to perform this action'. I've chmod the folder to 777 but still no luck.
The funny thing is, it was all working fine until I tried to add a new usershare yesterday (Can't think what I've changed). I use this sharing method to share all of my development /var/www/ folders so I can work on them from my win machine.
I have had a few problems with my samba smb.conf, and it nuked and rebuilt yesterday. I'm fairly new to the Linux game, and this permissions problem has me baffled.
View 1 Replies
View Related
Jul 26, 2010
I have mounted a samba share on my desktop from a remote server (with smb4k). There I created a symlink to "/". When I open the symlink with konqueror it opens the right one (the root directory of the server), but when i open this link with the shell (cd rootfs/), then it opens my local root directory (of my host)... Is it possible to open the right link with the shell?
View 1 Replies
View Related
Sep 15, 2010
Ubuntu 10.04 with Windows OS as Virtualbox, using Samba I connected to another computer which shows up mounted as:
Code:
smb://scott/premier9/
Now in Virtualbox Shared folders it doesn't show up so I can't share it?
Screen shots below...
How can I See it in Virtualbox?
View 1 Replies
View Related
Nov 16, 2010
My desktop is now dual boot, Xubuntu 10.10 has been added to WinXP. The attached parallel printer works fine with either OS. When running XP I can share the printer with my two XP laptops without problem. I cannot share it when the desktop is running Xubuntu. Neither laptop can see the printer. However, if I open the desktop Samba config application, change any parameter, retype in the original parameter, both laptops can see and connect to the shared printer - until I reboot the desktop
View 9 Replies
View Related
Jan 7, 2011
I've installed ubuntu 10.10 and shared with samba a folder of the disk with no problem I tryed to share 2 different usb disk and I got problems!
With windows I can see the shares, but not browse and all the setting in smb.conf are the same for the folder in the hard drive and the USB disk
View 3 Replies
View Related
May 3, 2011
I have a samba-share that mounts on my desktop. But how do I find it from applications?
When I browse from application is not visible in the desktop folder.
PS. I find it with smb://pathway, but I don't know how I can do it from some gui-applications.
View 1 Replies
View Related
May 8, 2011
I have two Ubuntu 10.10 computers and two Windows XP computers connected to my network. I cannot share files between the Ubuntu computers using samba. I keep getting the "Unable to Mount Location Failed to mount Windows share" error. I've tried the solutions posted by dmizer here and nothing works.Random true facts:I can successfully connect to folders shared on my Windows XP computers from either windows computer.I can successfully connect to folders shared on my Windows XP computers from either ubuntu computers.Neither of my windows computers cannot connect to folders shared on either ubuntu computer.Neither ubuntu computer can connect to folders shared by the other ubuntu computer.I REALLY need to get samba to work since I have other Windows computers on my network.
View 8 Replies
View Related
Apr 21, 2010
Can I share an NFS mount with samba?
Scenario:
ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs
I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).
I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)
I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.
I have disabled oplocks in samba and the problem still persists.
View 1 Replies
View Related
Jan 11, 2010
so i found an older computer i want to play with as a file server. ubuntu server edition, installed gnome GUI (to make things easier for now, i plan on removing it later) and used [URL].. to configure my 1.5tb harddrive so my windows machines can access it. i had everything working but than a fatal crash made me start from scratch (os and all) now i am unable to access the samba share from a machine running windows 7, but i can access it from a machine running windows XP using the same login and password i set up for windows 7.this makes me believe it's a problem with windows 7 and not samba.
View 8 Replies
View Related
May 6, 2010
I'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
I get:
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
View 8 Replies
View Related
Aug 10, 2010
I have this samba share for ghosting images to (backing up computers at work) and I can read the ghost images just fine from the share, but I am unable to write to the share. From any windows environment I have tried, I get a disk is full error. I have 200GB+ free space, so this is not the actual issue. I believe there is a write permission somewhere that I am overlooking. My setup basically lets me log in under the username samba from a client machine.
Here is my smb.conf file:
Code:
#======================= Global Settings =======================
[global]
workgroup = discount.local
server string = %h server (Samba, Ubuntu)
[code]....
I've tried chown on /media/Images to make it owned by samba, but it just reverts once I remount the partition. Either that or my eyes are playing tricks on me.
View 6 Replies
View Related
Sep 9, 2010
what I am trying achieve is read/write access for my MS domain account and read-only access for everyone else. In smb.conf I have this:
Code:
map to guest = bad user
usershare allow guests = yes
username map = /etc/samba/smbusers
[code].....
I can access this fine with my MS domain account, what I can't work out is how to give others read-only access to the same share. I guess I could create a second share for the same folder with a different name and permissions, but that seems a bit clunky and I'd have to remember to pass on a different name to the one I am using. I also tried using the Nautilus right-click "Sharing options" and then setting the folder permissions. This works fine for giving others read-only access, but loses capitalisation of the share name and doesn't seem to recognise my MS domain account as being valid.
View 1 Replies
View Related
Sep 15, 2010
I managed to install samba and it's GUI. I tried to share a directory within the pictures folder (at home/mark/pictures/share) just as a test. I had everything set up right, but it was inaccessible from a windows XP machine on my network. After some digging I found the problem lay with the permissions of it's parent folder. I right clicked on the parent folder then clicked properties, then clicked on the permissions tab. I changed the permissions for others and it's working fine.
I'm having the same problem now but with a share on a NTFS drive called storage. I cannot change the permissions for the shared folder or any of it's parents by right clicking. Any changes I make revert immediately back to their previous setting. Is there any way to change the permissions to allow read access to everyone?
View 9 Replies
View Related
Sep 22, 2010
I need to access a windows share at my university's server. When I am at the university, I can access the share by nautilus (or dolphin) in a similar way to ftp:
smb://domain%5Cusername@server/share
The thing is that when I try the above anywhere else except the university, it does not connect. I guess it has something to do with the domain, but I am not sure.
View 5 Replies
View Related
Oct 8, 2010
I have 2 Ubuntu machines: a desktop in my bedroom, and a laptop.
I have my music shared on my desktop machine, and can access it through the network menu item in the nautilus manager, but I want the files from the share to be mounted on the disk so I can access it through the commandline.
If I right-click the shared folder in Nautilus, it says its location is smb://rob/music
If I do:
mount -t smbfs //rob/music /mnt/music, it tells me that it cant locate rob.
So I try "ping rob" and that doesn't work.
I can't make a hosts entry for rob which happens at this moment to be 192.168.0.8, because my router assigns different IP addresses to various machines at different times, and I cant seem to find a way to make static maps from MAC address to ip address.
So, how come nautilus can see my samba share on the machine "rob", but the mount commands cannot?
View 7 Replies
View Related
