Ubuntu Networking :: Palo Alto Networks SSL VPN
Dec 16, 2010
I was wondering if it was at all possible to connect to the Palo Alto Networks SSL VPN in Ubuntu? I've been trying to connect to this VPN client in Windows with their crappy VPN client with no luck. So, I've given up on Windows and now am going to try Linux for this. I noticed they don't have an official Linux VPN client, however was wondering if anybody knew a way for me to connect. This is for work and I need to connect to this to finish what I need to do.
View 5 Replies
ADVERTISEMENT
Apr 16, 2011
I am trying to configure my android phone (rooted Eris running kaossfroyo 2.2) to be used as a midi controller. Which I am having enough trouble with as it is but it has raised an annoying issue that occurred a month ago when I used the phones tethering network with my laptop. After connecting the laptop to the phones network (either tether, or an Ad-hoc network created using the network manager) I am unable to switch to other networks. In other words when I'm done with the phone-laptop connection I cannot connect my laptop to my home network! When I click on the other network connection I can see that it is attempting to connect in the upper right corner of the desktop (the network icon) but it will not make the connection.
What happens is that the network indicator will make the little circle graphic as if it is trying to connect but it never will display the other circle as green indicating that it has connected. but when I disconnect from the home network that is not connecting I will get a message underneath that will say that ad-hoc network disconnected! If I am switching from the android tether it will say Android-Tether disconnected etc. Even though when I click on network manager it shows that I am attempting to connect to the home network (labeled LIBERTY in my case) upon disconnection it shows the ad-hoc or tether connection being disconnected.
I am absolutely baffled by this! The issue persists even after deleting the ad-hoc connection from the wireless settings tab!!! I would speculate that for some reason the laptop is attempting to connect to the previous ad-hoc connection despite me wanting it to connect to LIBERTY. I am very confused and hope someone can lead me in the right direction.
View 1 Replies
View Related
Jan 7, 2010
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
View 1 Replies
View Related
Jun 21, 2010
What i need to do is setup a gateway with 2 red networks, reason being 1 is my internet connection and the other is my bDSL connection for our IP phone system and i need an IP range of traffic routed to the bDSL rather than internet, i can do this on individual PC's but id like to do it at the firewall level so i dont have to configure each machine on the network.
basically i want all traffic to go to internet except for say 203.x.x.x which i want routed to the bDSL router and let it handle it. Ive dome some reading and it seems ipcop and smoothwall cant do it so i was hoping with some tricky work maybe i can get ubuntu to do it for me.
View 2 Replies
View Related
Aug 15, 2010
I just bought a new toshiba c655 laptop and had windows 7 on it. i made the dual boot partition on it, yada yada yada, anyway, on the windows partition i can see two networks at my house. one is mine, one is my neighbors. but when i go to the ubuntu side of things not a single wifi network shows up. i did a little combing of the forums and decided to try installing the ndisgtk package which i obviously need internet for. i thought i would plug it into an ethernet cable running straight from the modom and i could connect and download no problem. however. this has turned out to be quite a mistake. ubuntu does not even recognize the fact i have an ethernet cable plugged in. this may or may not be related, but niether my ipod or my cell phone does not show up when i plug those in and when i try to mount them i get an error message that says they could not be found. Im running 10.04.
View 2 Replies
View Related
Oct 12, 2010
i have an acer aspire 7551, and trying to setup wireless. The WI-FI indicator is turned off. Here is the basic output that i get:
Code:
ubuntu@ubuntu:~/Desktop$ sudo lshw -C network
*-network
[code]....
View 3 Replies
View Related
Dec 28, 2010
I installed ubuntu and i installed it using the install as a program inside windows options but when I boot into ubuntu it does not detect any networks I tried the command sudo pppoeconf it says ethernet card is not there and then it asked me to try modconf and when i try modconf it says that modconf is not installed How can i set internet connection in ubuntu 10.04 I get address assigned by DHCP
View 7 Replies
View Related
Jan 24, 2011
I have an hp dm1z and ubuntu 10.10 64bit. After I suspend (close the lid) and wake it up (open the lid) at a different location with a network connection (wired or wireless), my system always fails to connect. I need to reboot and then it sees the network and connects fine. I have tried /etc/inet.d/networking restart, but nothing changes. The only exception to this rule are two networks that have WPA security settings and are stored. I can always switch between those two. I have tried ifconfig eth0 up & down and restart networking. I have also tried to connect manually (dhclient) and no success. None of these work. I am including the output of lshw -C network.
lshw -C network:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
[code]....
View 1 Replies
View Related
Feb 1, 2011
I have an MSI Wind U100 netbook running Maverick, and it has a Realtek RTL8187SE Wireless controller according to lshw. My computer can "see" some wireless networks where they are present, meaning when I click on the little network icon at the top of my screen it shows the available networks. But when I click on them to connect, the icon does its little "connecting" motion, but I never receive any message saying "Connected" and when I open Firefox and try to browse to google.com, it says "Server not found"
View 8 Replies
View Related
Mar 22, 2011
I have an ethernet card connected to my LAN and a USB cell modem internet connection. I am running ubuntu 10.10. The problem is this: I can use either network, but only am connected to one of them. If I connect to both at the same time my speed drops to zero.f I disconnect one, the other starts working. I have done a lot of searching and reading, but it looks like I don't know how to find what I am looking for.My LAN was setup as 3 WinXP computers peer to peer. One of those computers was replaced by this one that I am having trouble with (computer A). Another one was replaced by one that is not yet on the network (computer C).Computer B dual boots Win XP and ubuntu 10.4. Mostly it ns xp for Quickbooks and BobCAD, also it is connected to the printer. My router is setup for DHCP
View 2 Replies
View Related
Feb 14, 2010
I have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies
View Related
Mar 23, 2010
I have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
View 3 Replies
View Related
Apr 5, 2010
I'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies
View Related
May 4, 2010
I am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
View 8 Replies
View Related
May 7, 2010
I can normally connect to most wifi connections, but for some reason I can't connect to my broth's-gf-parent's network. Windows 7 can connect to it just fine, but not Ubuntu. Once in a while I'll go to a cafe, and this will happen there too.hough, like I said I can normally connect to all other wifi networks with no hassle
View 1 Replies
View Related
Sep 5, 2010
I'm running Ubuntu 10.04 64bit on a Thinkpad T61, and I keep running into some issues with the wireless networks. For a while, the connection works fine (sometimes several hours, sometimes 15 minutes or so--there doesn't appear to be an event associated with it). Eventually, though, the connection disappears; first, though the widgets say I'm connected, nothing will go through, and soon after, it realizes I'm not connected and, moreover, it can't find a single wireless network, despite the fact that it was just fine a couple of minutes beforehand (and other devices still have access to the WLAN, so I know that the router hasn't crapped out). I've tried using wicd, but the same thing happens.
View 2 Replies
View Related
Oct 10, 2010
I am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies
View Related
Oct 11, 2010
I have a pretty beat-up laptop, on which the inbuilt wireless doesn't work, and so I now have an ASUS WL-167g, which is acting up!It almost always connects to the required networks without an issue, but then once I'm connected it's REALLY slow on some of them! For example, while I'm at school, it works flawlessly! And at a couple of friends' houses, it works too! however, at home, and at a couple of other places, despite the fact that it connects, its so slow, that google takes like 5 mins to load and searching for anything on google leads it to time out!! This happens whether I'm right next to the router (full signal strength) or 2 floors up (at like 3 bars strength)!
It's getting pretty frustrating to have to swap my lan cable between my desktop and laptop constantly, and also to not be able to use my laptop away from my desk!Does anyone know what might be going on??Also, while i have you guys here! I have another problem -- with the inbuilt card.. Initially, it wouldn't work at all.. but more recently, it has started to function (it connects and works on my home network fine) the only problem is that about 10 mins after I turn the wireless switch on on my laptop, it hangs! (EVERYTIME) (if it's relevant, my laptop is a SONY VAIO VGN-S46GP). Again, any input would be appreciated!!
View 1 Replies
View Related
Oct 16, 2010
I installed Lubuntu yesterday on an older Dell laptop and the installation went fine. The only thing not working after the installation was the wireless. After hours of searching, I was finally about to get it to recognize the wireless card, see wireless networks, and connect successfully by running these commands.code...
View 3 Replies
View Related
Oct 17, 2010
I have ubuntu 10.10, and at my house I primarily used wired, and it works fine, and under windows earlier today I was able to locate networks, so my wireless card is working. I'm currently at my girlfriends house, and trying to connect to her wireless internet. When I try to connect, I can't find any networks. I've made sure her network has sharing and discovery enabled, however in my wirelss manager it comes up as blank. There's the option to add wireless manually, but do I really need to go through the trouble of finding the routers mac address and all that, it should just show up?I could switch back to windows to see if I can connect, but I'm almost positive it's just the linux wireless manager..
View 4 Replies
View Related
Nov 6, 2010
I arrived in the Central African Republic only to find that my wireless (on an HP Mini 5102) wasn't working -- it didn't detect any wireless networks. So I wiped off Windows and installed Ubuntu 10.10, Luckily, it did! (Partly.) At first, I still didn't get any wireless networks. I messed around with all the various things you have to do to get Broadcom wireless drivers working. Finally, following a forum suggestion, I installed Wicd -- and this did the trick. Not knowing any better, I kept Network Manager alongside Wicd, but Wicd is what works much better. (Is there a reason to un-install Network Manager?)
However, when I try to connect wirelessly to the network at this country's one cafe with wifi (which usually works really well, by CAR standards), the network doesn't appear. At the office, when I open Wicd, it includes a box with the message "<connection name>: obtaining IP address", and bit by bit it connects. But when I open Wicd at the cafe, this doesn't happen -- it just gives me a list of random signals from nearby offices (all secured and low-signal), none of which I can connect to. Any ideas how I could get the cafe network to show up?I'm at the office now, and so it's working. However, in order to get it working I had to restart three times -- Wicd only seems to work about half or 33% of the time. Sometimes I get the message: "Connection failed: unable to get IP address" and sometimes I get the message "No wireless networks detected." Then I try again and eventually it works. So far.
View 9 Replies
View Related
Nov 21, 2010
I've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies
View Related
Dec 27, 2010
I need to have the ability as network administrator to see what everyone connected to our internet is doing, the sites their visiting and emails being sent.
View 6 Replies
View Related
Jan 28, 2011
I'm having trouble detecting wireless networks in range.
View 1 Replies
View Related
Jan 31, 2011
I'm using Ubuntu 10.04 on my old HP laptop, and I can't enable ANY networks (ethernet and wifi) with the NetworkManager applet.This started after suspending the laptop. It wouldn't wake up, so I had to make a button shutdown.The "Enable network" checkbox apperars unchecked, but when I click it it doesn't get checked.The interfaces themselves are enabled and working, since the led on the ethernet plug is lit, and I can get a wifi AP list with iwlist scan (but I have to enable the wifi card first with ifconfig up)
View 7 Replies
View Related
Feb 2, 2011
My wireless and direct connect Ethernet seem to stop working after a two minute up time. I am using ubuntu 10.10 and did not have this problem before. Anyone else reporting similar issues? I wont get a disconnect message right away. It will show connected up top but after a while all web pages will simply stop loading. all downloads will stop downloading and then after a minute or so it will time out and say wireless disconnected. then reconnect sucessfully and still will not be able to load any web pages. the problem is not with the network as I have tried it on 3 seperate networks using different media.
View 9 Replies
View Related
Feb 9, 2011
I just purchased this card, but when I run iwlist scan it shows 'No scan results'. I'm using the rt2800 drivers - I saw a couple of posts about using the rt2870sta driver but when I did this it didn't even show up under iwconfig. I'm sat next to my router and I've tried it with XP and it seems fine.
View 2 Replies
View Related
Feb 27, 2011
First time ever switching from windows. Mainly doing this cause I though it would be fun to learn a new OS and see how it is.From watching a few videos it looked like all I have to do is click on the wifi logo at the top of the screen and I would get my router and a bunch of others (does this on windows) but when I click on it I dont get anything. I think it might be that im running this on a laptop. My wifi card is: Standard Dell Wireless 1501 802.11 g/nIts a new dell inspiron 5000 laptop i customized a little with more ram and a new video card.
Im guessing I will need to provide more info but as I said at the start Im new to this and not sure how or what info I would need to provide. Please just tell me how I can get any data you need and il get right on it. (I used Wubi to install this, went off without a hitch)
View 8 Replies
View Related
Feb 27, 2011
got a dell inspirion 15r (i think), and it comes w/ win7 (I HATE Win7) so i made him let me dual-boot with ubuntu maverick meerkat. (he wouldn't let me get rid of win7 cuz thats what his parents use.) It installed successfully, so we booted into it, and there was no wifi networks. I thought it was because wifi was disabled so i press the button i think its F5 but still nothing. I thought it might have been the comp but i booted into win7 (Que the Beethoven's fifth)... and it worked in win7 (thats a first) can someone help me. Oh and i forgot i used that terminal command to unblock wifi
View 2 Replies
View Related
Apr 10, 2011
I have 2 network cards in my computer, and I would like to connect them to 2 different networks. Both connections work fine when I use them so that the other one is unplugged, but as soon as I connect the second plug (doesn't matter which one is first) they both stop working.I've been googling and reading dozens of pages about how to set this up, but I still can't figure it out.
One connection gets its addresses from DHCP and that connection is used for pretty much everything. The other connection has a static IP, and is used to access just one other computer, which is in the same subnet as that static IP.I'm using Ubuntu and I've been using the NetworkManager Applet to manage my connections. If I've understood my googling correctly, NetworkManager Applet can't be used alone for this kind of setup, is that correct? (Even though it has that "Routes..." button and "Use this connection only for resources on its network" which I've tried for the connection with the static IP, but they don't seem to help.)
So my questions are:
1. So I really can't use NetworkManager Applet for this?
2. What software / tools should I use instead? (My googling brought up such wildly different solutions, and I don't know which ones are outdated, if any.)
3. Should I get rid of NetworkManager Applet completely?
I'm familiar with routing in theory, totally clueless about the networking tools in Linux, but happy to read manuals and happy to learn to use the command line versions if anyone can point me to the right direction.
View 3 Replies
View Related
