I'm Using the latest Kubuntu 10.10 with the default network manager -- which I think it's called Knetwork manager.
I have set up a static IP by adding a new connection using this manager and then clicking it so that it is used to connect. But as soon as there is a computer reboot the connection falls back to the original autoeth0 which has dynamic IP on and which I cannot change or delete.
I would like to transfer the settings and list of installed applications to a new partition as I propose to do a fresh install into a new partition.
Can it be done?
If I could run ubuntu from the old partition I would do:
SUDO dpkg -- get-selections >/home/robin/package.selections
but
I can no longer boot from the old partition. I can access it from within the live cd. Is there an application which will extract a list that will set the old application selections into the new partition?
I'm currently trying to setup a static IP address for my computer, but everytime I set the static IP my network does not works.
My lspci -v shows the follow.
Code:
Ethernet controller 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device 7529
[Code].....
Even after restart the system my network only works when I use dhpc to resolve my IP Address.
I've been using slackware for many years. I think I started with Slack 8. I know how to configure the network, I've had this same POS Dell computer for a few years now but the other day I tried to go to a different distro (first mistake) everything worked fine but it was not for me. Once you go slack you never go back! Anyway I had slack on here prior to the change and it all worked fine. I'm running slack 13 and all of a sudden my network is slow as balls! I set it up as I always have so I did some research and tried a few things, nothing worked. So i enabled DHCP and its fine now.. I have a dell xps 420. onboard intel nic. worked fine when i first installed slack 13. Anyone have any clue what to do? I would like my static IP on this machine.
View 6 Replies View RelatedI'm having mysterious wired network problem with my Karmic/9.10 machine. It hasn't been in network a while, but now I finally got the cabling done. I can't get the IP from dhcp server (TW-EA510), and static settings doesn't work either. Fresh cabling showed OK 1Gb connection on tester, and win7 laptop works fine. I even tried with long cable though the rooms, but it doesn't help, so it definately isn't the new cabling.
Log from the router after issuing #"dhclient":
Feb 16 23:01:43 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:43 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:01:49 DHCP SERVER: DHCP request from 00:1b:ea:c8:a0:ba
Feb 16 23:01:49 DHCP SERVER: DHCP ack to 00:1b:ea:c8:a0:ba
Feb 16 23:01:54 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:54 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:02:03 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
[Code]....
Motherboard is some old Lanparty with two ethernet ports, NVidia CK804 and Marvell 88E800 rev 13 Gigabit netwok adapters, neither of them works. At least another of them has been worked earlier when I last got it wired. It's been a while, so I'm not sure which one of them and with different router if that matters.
I have installed Lucid in a new laptop. Things are running OK except for the following problem:
I connect to the network/Internet using Wired ethernet (TCP/IP) with static IP. Everytime I reboot/restart my network configurations are lost and I have to re-configure. I have googled this problem and have seen a few posts/bugs in launchpad etc. for what appears to be the same issue...but unfortunately I am not getting a clear solution to this problem.
Just for clarity, I am using the following commands to re-configure my network everytime:
Also note that I have already tried editing the /etc/network/interfaces and the /etc/resolv.conf files. But it seems that these are not being picked or are being overridden.
I turned down my txpower with the command: sudo iwconfig wlan0 txpower 3 Which works to fine turn down my broadcast power from the default value of 15 dBm to 3 dBm. But it is reset every time I restart Ubuntu 11.04 to the default value of 15 dBm. How do I save my modified txpower settings so they don't reset after a restart? It is really annoying having to re-enter the command every time I reboot my computer!
View 2 Replies View RelatedIm new to fedora 11 and iptables, and i need to set the following set of instruction so VirtuaBox can accept request from lan, to the mailServer in the guest os, but after restart fedora i have to input it all again.How can it become permanent entry in iptables.
View 2 Replies View RelatedI am running a debian squeeze machine on a ibm t40 laptop with window maker as my window manager. I am using gpointing-device-settings as a program to get the scroll bar on my touch pad working. unfortunately, I can't get the settings to stick after i shutdown and turn on. I have to go into the program and unclick then reclick the button. i'm using version 1.3.2 (ive tried both deb and source versions). does anyone have any ideas on how to fix this? and if there is any configure files that I could configure instead of having to use the gui program.
View 4 Replies View RelatedI m trying to use static ip address on debian. I followed a tutorial and I modified the /etc/networking/interfaces but every time I reboot I can't do anything because the nm-applet says that I have select a manually connection..
View 1 Replies View RelatedI do randomly (as far as I know) loose my wireless network connection. The only thing to do then is to restart my router and after that it works for a while. I know this is not a hardware issue because I don't have this problem with KDE, only in gnome. I think this problem occurred after I started using 10.04, but then I changed to KDE and forgot about it. But now I'm using gnome again and loosing my network connection over and over drives me mad
View 1 Replies View RelatedI noticed that every time I reboot some system settings sort of roll-back automatically to some time in the past.
So far I noticed these:
-All the aMule setting. Includes connection ports and Incoming folder, very annoying.
-Firefox search box engines. every reboot the list of engines rolls back to include a lot of engines i don't want and have to remove every time. this is the only thing in Firefox that is affected, bookmarks and add-ons stick.
-Keyboard layouts. Tried clicking "apply system-wide". still rolls-back after reboot.
What could cause this? How can I set these things permanently?
I'm using ubuntu 9.10 32-bit
I installed Kubuntu on my Toshiba A135 with no problems at all...everything works: sound, wifi, LAN, etc...BUT whenever I reboot/restart the computer my Display and Audio settings revert back to default, and it doesn't happen when I log out, just when I restart/shutdown the computer. I have an Intel 945GM chipset and I have set my external Acer 23" monitor as the default and only monitor with a resolution of 1920x1080@60Hz using KDE's System Settings...And I chose to disable the laptop's internal monitor...but whenever I restart, the display returns to a 1024x800 cloned resolution (the default one)...which by the way looks hideous on a 23" monitor. And also the sound mixer goes back to the default levels.
So, can anyone help me out? I've been using Ubuntu for over 3 years and I've never had any problems like this one. I have just fell in love with Kubuntu, it looks and runs great, but this problem/bug is keeping me from being comfortable with it... I've been reading some things about XRandr and some commands and stuff and nothing have worked until now. I wonder, is it a common bug in Kubuntu or maybe an erroneous setting in the session manager....?
Running Debian GNU / Linux 5.0.4 on an older Gateway tower. Have been using this for a year now but it seemed lately that the browser was loading pages slowly. I checked the Network Icon and every time I check it indicates "disconnected" then refreshes and indicates connected. The log makes references to redat, which my machine has nothing to do with? I checked the system logs and get the following repeated messages:
[Code]...
I have a problem with network on centos, after i restart the server it works for few hours/couple days, and the network is dropped. - no errors in the log, only that "Network is unreachable" I do 'service network restart' comes back on- directadmin, dns, awbs- everything works good, but only for few hours(never longer then couple days), and then it is dropped again. I searched many forums, and on one them someone wrote that it is because that static IP was used on the same network by other machine. I had a different server running with that ip on my network before, but it was few weeks ago, and there is no other server connected to the network right now (I have one desktop connected with dynamic ip, and it has no problem), and i still have the same problem.
I was suggested to set a cron jobs to restart network every few hours- i thing that is not a solution. Does anyone have any idea what could be a problem? Anyone had similar problems? What could be the reasons for the network to be dropped after few hours? Here is latest 'dmesg' output after losing network:
[root@server ~]# dmesg
Linux version 2.6.18-194.8.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jul 1 19:04:48 EDT 2010
Command line: ro root=LABEL=/ rhgb quiet
BIOS-provided physical RAM map:
[Code]...
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies View RelatedI'm using Ubuntu Netbook Remix 9.04 in Acer Aspire One together with Windows XP (both on different partitions). The trouble since installing Ubuntu has been that my keyboard has scandinavic layout which includes "" and "" keys. When I assign the layout in Ubuntu's as "FI" instead of "USA" everything is fine. After reboot for some reason the changes made won't stay and I have to change the keyboard layout manually. If I remove "USA" from the list after reboot it'll appear to the list again!
I've tried to create /etc/X11/xorg.conf file with the keyboard configuration code, but it has no effect for the situation. I've tried also command:
Code:
sudo dpkg-reconfigure console-setup This has no effect also.
I'm starting to be frustrated for the situation. I really enjoy using Ubuntu instead of XP but this just doesn't make sense that the keyboard layout won't stay on.
I am a newbie and loving Ubuntu Lucid Lynx. I have my cube working great with all the associated effects yet after about 20 minutes or so, the cube options are all unchecked and I no longer have the cube. What could be causing this? Initially I thought it was only after reboot but I left the house today for 20 minutes and when I came back I had no box and sure enough the cube options were unchecked.
View 1 Replies View RelatedI have installed wally on my Dell inspiron 1420 with Ubuntu 10 10 . I have pointed wally to my personal picture folder in an external drive in folder settings. But whenever i reboot folder settings gets reset and i have to set the picture folder path again. Is there a way by which what ever path i set will stay after the reboot of the system.
View 3 Replies View RelatedI know this has been covered before but I can't find a resolution to the issue. Kubuntu simply refuses to save the screen settings, and each time I reboot it returns to 1440 x 900. The correct resolution should be 1920 x 1080.
KRandr shows 1440x900 (auto) in its drop down Size field. I've set krandr to load on startup so that I can set the correct resolution but of course this means I have to set the panel size as well. I've only recently installed KUbuntu and it's great except for this issue. Surely there must be a simple fix? I'm not a noobie and have about 4 years experience on Ubuntu / openSuse etc.
As said in the subject, desktop decoration settings keeps resetting after rebooting. For me it is quite boring and annoying. Why it happens? Ubuntu should keeps my preferences (as in previous versions - my Ubu 10.10, Unity)
View 4 Replies View Related1st, i managed to make a VPN connection to my server and after a reboot i get this:I've tried everything that google gives me with "ubuntu vpn service failed to start pptp" search terms.2nd, I've got a DSL connection (PPPoE) to the internet. When i connect it, eth0 looses it's ipv4 ip (I've disabled ipv6). How can I keep it?
View 1 Replies View Relatedan ubuntu with address 192.168.1.100 an OpenSuse with address 192.168.1.106a windows xp with address 192.168.1.102And these are connected via a DSL router/switch (4 ports eth) .My purpose is config the ubuntu as a Firewall and NAT server for investigating the network layer packet with specific policies .well, I've used the following script :
Code:
#!/bin/sh
IPTABLES=/sbin/iptables
[code]...
My system (Ubuntu 9.10 Gnome Desktop) keeps 'forgetting' my sound settings. every day I have to go into sound preferences and select a different hardware device setting and then change it back to the right one in order for it to work. For instance my sound goes out of my onboard intel based sound via optical to my amp and so the hardware setting for this is IEC598 output + analog stereo input But everytime I boot their is no sound (and hence no light coming through the optical cable) so then I'll change it to Analog surround and the light comes out so then I can change it back to the 1st setting and it works again. Hope that makes sense, I have had this problem and also my video settings have been 'forgotten' and samba also won't work ever since about 4 days ago when the system updated, everything was working fine before that (i have run update manager since and everything is up to date)
View 2 Replies View RelatedI have just upgraded to Lucid Lynx. Just after that the borders of disappeared. Anyway, I found out I can get them back if I enable Standard Visual effects from the appearance menu. The only problem ?i have is that the options don't get saved and I need to do this over again every time I reboot.
View 9 Replies View RelatedSo I have a fresh updated install of 10.10 on dell dimension 4550
The pc connects to my monitor through a dlink KVM switch so I can switch back and forth between computers.
When I reboot my monitor settings disapear and everything is real real large.
If i disconnect from the KVM and connect Ubuntu directly to the monitor and detect monitor it will allow me to adjust settings so everything looks normal. Until I reboot and I am back to the same huge icons again. If I try to go back and adjust monitor settings there are only 2 settings options because it does not see my monitor through the kvm switch again.
I dont understand why but my theme changes everytime i reboot. The original theme Human changes to i think dust. when i open the appearance applet to change back the theme, the original human theme is already selected. So i have to select some other theme and then i select human theme, then the theme changes.Also the order of my taskbar icons changes and also the icons themselves.
View 3 Replies View RelatedI'm having a problem with the mesa-dri-drivers-experimental, I bought a new monitor, Samsung 24" Widescreen LCD Monitor (B2430H) and my old monitor was a 24 inch too but with a different native resolution, my new monitors native resolution is 1680x1050 and I try to change the settings in the system settings/ display/ size&orientation area since the mesa drivers don't have a xorg.conf but my settings don't save after a reboot. Is there a config file for the mesa-dri-drivers-experimental where I can change these settings?
View 5 Replies View RelatedInitially, Debian detected my M-Audio soundcard right off, and things were going great, until I tried to get a Logitech webcam working. Got video going, but no audio, so I installed cheese, alsa-base and alsa-utils, and played around with settings according to copious forum threads dedicated to the problem of Linux and webcams, all to no avail. Then I had NO SOUND, until I did a alsa-conf, which detected and (re)set my M-Audio card, until reboot, then again, NO SOUND. Settings were not saving through reboot.
So I purge removed alsa-base and alsa-utils, hoping that things would magically revert to pre-webcam experiment. Still no sound. I have given up on the webcam idea; I'll use my XP Pro laptop for that. But I need sound on this Linux box. Oh and when I'm playing ....., etc. the soundcard itself is making chatter noises to the beat of the music. This soundcard was working perfectly before I started the webcam debacle, so it's not a hardware issue.
I run OpenSuse 11.4 with KDE 4.7. When I change the positions of icons in the main plasma panel, or reshape folder view plasmoids on my desktop, these changes are lost when I start my computer the next time...
View 9 Replies View Related