Ubuntu Networking :: 10.4 Not Showing Wireless Network
May 22, 2010
Another Ubuntu install, another round of wireless problems. I have a Dell Inspiron 530 Desktop that I used Wubi to install Ubuntu 10.4 on alongside Windows 7 Ultimate. Everything installed perfectly but it's not detecting my wireless network so I therefore have no wireless access. My wireless network icon is gray with a red "!" on it; when I click it I get:
Wired Network
disconnected
Wireless Networks
disconnected
My wireless network does not show up at all; it's not hidden. When I try to enter it manually, I do so and when I click it I immediately get a popup that says
Wireless network
Disconnected - you are now offline.
I only have a wireless connection since the router is in another part of the house, and this is really frustrating me that this stuff doesn't just work on install like OSX and Windows does.
View 4 Replies
ADVERTISEMENT
Feb 7, 2010
Wireless network card is showing as "disabled"...How can I enable it through Ubuntu?
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
*-network DISABLED
View 3 Replies
View Related
May 29, 2011
Well when I first installed fedora 15 my wireless internet was working fine, and then out of the blue the option to select a wireless network wont show up.
Im sorry to be one of those people who register and there first post is a question, but since fedora 15 is new I couldnt find any information on my issue.
So basically, If I go into Network Settings I have two choices in the left hand tab. Wired, and Network proxy. Yesterday I also had wireless, Since the issue I have updated everything but still have no luck.
I am having this issue on a emachine em350 netbook, I am unable to post a link to it as I get a error since im new and not allowed to post links.
View 5 Replies
View Related
Jun 5, 2011
My Wireless isn't popping up in the network tab. I'm running off of a ethernet cable. I tried reinstalling the drivers using Windows Wireless Drivers, it said it "detected hardware" but it didn't really enable my wireless. I'm on Ubuntu 11.04.
View 2 Replies
View Related
Feb 7, 2010
I have been using Ubuntu for a couple of days now and I am starting to like it alot. I decided to install it on my laptop, but getting it to connect wireless is becoming a problem. I have been searching all day on how to fix this but nothing so far has helped.I had Windows 7 installed before and it connected fine.
View 1 Replies
View Related
Oct 17, 2010
I have ubuntu 10.10, and at my house I primarily used wired, and it works fine, and under windows earlier today I was able to locate networks, so my wireless card is working. I'm currently at my girlfriends house, and trying to connect to her wireless internet. When I try to connect, I can't find any networks. I've made sure her network has sharing and discovery enabled, however in my wirelss manager it comes up as blank. There's the option to add wireless manually, but do I really need to go through the trouble of finding the routers mac address and all that, it should just show up?I could switch back to windows to see if I can connect, but I'm almost positive it's just the linux wireless manager..
View 4 Replies
View Related
Nov 6, 2010
I arrived in the Central African Republic only to find that my wireless (on an HP Mini 5102) wasn't working -- it didn't detect any wireless networks. So I wiped off Windows and installed Ubuntu 10.10, Luckily, it did! (Partly.) At first, I still didn't get any wireless networks. I messed around with all the various things you have to do to get Broadcom wireless drivers working. Finally, following a forum suggestion, I installed Wicd -- and this did the trick. Not knowing any better, I kept Network Manager alongside Wicd, but Wicd is what works much better. (Is there a reason to un-install Network Manager?)
However, when I try to connect wirelessly to the network at this country's one cafe with wifi (which usually works really well, by CAR standards), the network doesn't appear. At the office, when I open Wicd, it includes a box with the message "<connection name>: obtaining IP address", and bit by bit it connects. But when I open Wicd at the cafe, this doesn't happen -- it just gives me a list of random signals from nearby offices (all secured and low-signal), none of which I can connect to. Any ideas how I could get the cafe network to show up?I'm at the office now, and so it's working. However, in order to get it working I had to restart three times -- Wicd only seems to work about half or 33% of the time. Sometimes I get the message: "Connection failed: unable to get IP address" and sometimes I get the message "No wireless networks detected." Then I try again and eventually it works. So far.
View 9 Replies
View Related
Jan 9, 2011
I am new to ubuntu 10.10 and facing problems in my wireless connection, thought it works proprly on wired connection.I am using HP pavillion dv2000.
View 1 Replies
View Related
Apr 23, 2011
i have a TP-LINK TL-WN350G wireless card and i can't seem to be able to get the drivers working for it. I have used ndiswrapper and that did nothing. I was wondering if anyone can help me get wireless connection up and running. I have a ethernet connection ready just in case. And i am running Ubuntu 10.1
View 8 Replies
View Related
Jul 16, 2011
I have installed Ubunu 10.04, and after that i have installed the wireless driver from Hardware Drivers.
The problem is that no wireless networks are showing up and i cannot connect to my wireless router. Tried rebooting, but still nothing.
View 3 Replies
View Related
Jan 25, 2010
NetworkManager no longer shows my wireless N network. But when I boot into windows (dual boot) I can see my network and use it.
View 1 Replies
View Related
Apr 29, 2011
Here is the output of lspci -v on a dell xps laptop I got today:
Network controller: Intel Corporation Device 008a (rev 34)
Subsystem: Intel Corporation Device 5325
Flags: fast devsel, IRQ 17
Memory at f3b00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: iwlagn
View 3 Replies
View Related
Jan 20, 2010
as the titles states my wireless is dropping out but the networks manager is still saying i have a connection. the only way i have been able to be on the network every minute or so i have to manauly disconnect and reconnect to my wifi. under my windows 7 and vista installs the wireless card works fine now my card is a dlink dwa-547 and it uses the arthores chipset, it is encprtyed wifi, wpa2 aes on a n/g based network
Code:
peter@ubuntu:~$ sudo lshw -C network
*-network
description: Wireless interface
product: AR5008 Wireless Network Adapter
[Code]....
View 8 Replies
View Related
May 30, 2010
I wanted to get away from windows, because of the helll lot of issues it gave me. I installed ubuntu in my machine, and i am facing lot of issues to activate internet. May be I am fool number one. So need some help from experts. FIrst my hardware details :-
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Hewlett-Packard Company Device 1508
Flags: bus master, fast devsel, latency 0, IRQ 16
[code]....
I have gone thru lot of websites and forums to try to enable the wireless connections. Till now I have installed the ndisgtk_0.8.5-1_i386.deb, ndiswrapper-utils- .9_1.54-2ubuntu1_i386.deb & ndiswrapper-common_1.54-2ubuntu1_all.deb. Then I was able to install the windows driver for my wireless card. But still the status is showing as disabled for the wireless adaptor. Please help to make it working.
View 3 Replies
View Related
Dec 5, 2010
I have a laptop that I don't use anymore so I figured I would use it for trying to get used to the command line in Linux. The lspci line for my WiFi adapter is:
Quote:
02:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
When I run iwconfig to see if my adapter is getting picked up I only get an output for the loopback interface and my Ethernet port. I installed the following packages which I thought would be enough to get it working:
Quote:
b43-fwcutter, broadcom-sta-common and broadcom-sta-source
I was able to get it working in a regular Ubuntu installation, but it doesn't seem to pick it up in this install. Does anyone have any tips/advice? I went with the minimal install because I wanted to see how lightweight I can get the OS.
View 9 Replies
View Related
Sep 25, 2010
I have recently upgraded the ubuntu desktop edition from 8.04 to 10.04. after upgrading i cannot show my eth0 nic interface in the System > Preferences > Network connections----- wired tab. and i also not getting network indication in the top of the panel beside the date time indication. but i can access network and using internet with that lan card. i cant understad my eth0 is connected or unpluged..
View 3 Replies
View Related
Jan 31, 2010
It's a Acer Aspire 4520 Laptop running Vista Ultimate. All Drivers are working fine except Wireless. No wireless adapter is shown in Device Manager. Acer website was no help at all, has the drivers but no adapters for download. This laptop shows that it has Acer signalUp, also shows 802.11b/g WLAN on the sticker. I've downloaded Athero AR??? wireless driver, did not do anything to help the problem, downloaded the broadcom one also and it did nothing. Works fine on the LAN cable but no wireless.
View 1 Replies
View Related
Oct 12, 2010
I upgraded to Maverick over the weekend from Lucid, and at school yesterday, I could no longer connect to the campus wifi network in my office. I have no problem connecting to the wifi network at home, and my phone still sees and connects to the campus wifi network, so I think the problem is with my laptop (Gateway T-6345u), which doesn't even detect the campus network. As of last week, it connected automatically, and now it can't even see the network.
View 3 Replies
View Related
Mar 8, 2011
I found that I needed to connect them to the same workgroup, which I now have and for the most part it works. However, for one of the computers I do not want to use a .local domain, rather I need to use a .org. But no matter what I do, other computers on the network think it is a .local hostname. Currently the /etc/hostname on the computer file is as follows:
[Code]...
Here is a screenshot of an ipscan done from another computer on the local area network so you can see what I'm talking about.
View 2 Replies
View Related
Mar 31, 2011
My network monitor seems to have disappeared from the taskbar.I tried right clicking and "Add Pannel" however I do not see "Network Monitor" in the list.I tried running Code:nm-applet --sm-disableBut this gave me the errorI figure this because it's already running so I tried to killall and try it againThis time I getCode:** Message: applet now removed from the notification area** Message: applet now embedded in the notification area** (nm-apoplet:4498): old state indicates that this was not a disconnect 0I see a 1-2 pixel sliver of something appear briefly in my taskbar and then it disappears, I assume this was the n ntly installed tshark (curses-based version of wireshark)
View 1 Replies
View Related
Jun 4, 2011
I have u usb 3G stick and I configured a mobile broadband connection to connect to the internet.I filled all details and saved the connection.Now I clicked on the network manager icon in top right corner, but there was no connection with the name I just created.Again I checked in edit connections dialog box and found the connection there.Now how do I connect to this newly created connection while there is no option in network manager?
View 9 Replies
View Related
Dec 15, 2010
Until this morning, my Wireless had always been working fine. This morning I rebooted after an Ubuntu update and now:
- I am asked twice for "enter password for keyring 'default' to unlock" whereas before I was always just asked once.
- The connection seems to be established, with the icon showing good reception and the tooltip reads "Wireless network connection 'mywifi' active: mywifi (100%)
BUT I can not connect to any website or ping the machines of my network, even by IP address. All of the other computers around (Mac, Windows) can use the Wireless as usual. My Wireless is WPA-PSK TKIP hidden SSID. My Ubuntu is 10.10 Maverick.
View 2 Replies
View Related
Jun 23, 2010
I'm new to Linux and I have a problem with the Wireless connection.I've already searched for this problem but found so many threads it was impossible to sort it out.I've just installed Fedora 13 (Live CD - Install to Hard Drive) and apparently it's kinda... "empty". But my problem is with the wireless connection. There is a free network provided by my city for all the citizens. It is Open (authentication) for all. The problem is I can't "see" the network in Feodra. In Windows 7 I can "see" it just fine with 3 bars signal strength. It is great for surfing and emails. It is not intended for heavy downloading.
Why can't I "See" this network? There is another weird thing. The neighbor above me has a Wireless access point closed of course but I get 44% signal strength in Fedora and Full bars in Windows. Does it have to do anything? Maybe the low signal of the free network is the problem and Fedora makes it disappear completely?
View 10 Replies
View Related
Aug 20, 2011
I seem to have a little problem with the Network Manager applet - it works vaguely OK, even if it takes a bit long to find my connection, but when I click on the icon, the menu doesn't show.I have also installed the applet through the Ubuntu Software Centre.Just to clarify, the icon appears fine in my panel, and the notifications appear when I am connected, it's just that the menu doesn't appear at all.
View 5 Replies
View Related
Dec 22, 2009
Ive been using fedora 11 fora few months now and suddenly today after I booted up fedora network authentication(the little icon that lets me choose wifi networks) isnt showing up in the upper right hand corner which isnt that big of a problem but the fact that its on start up applications and its not wondering is what Im wondering about but on top of that my internet doesnt work at all.It will work for a little bit after boot then die and when I go to network authentication and network manager no wifi networks show up and I have about 5 around my house not including my own which is also what ive been wondering.
View 7 Replies
View Related
Oct 2, 2010
a Toshiba L650 laptop, and installed F13 x86-64 on a disk partition using install DVD. The wired ethernet on this is Atheros AR8152, and the Wireless is Broadcomm 4313. Both these devices are not supported by default. So, as per instructions on the Linux Wireless site, and some guidance on this forum, have downloaded the Broadcomm driver tar on another machine, copied it onto the Toshiba laptop using a USB device, and then extracted, and ran the b43-fwcutter. The subdirectory /lib/firmware/b43 is created and has approx 3 dozen files. However, the Broadcomm driver is not showing up as an option in the Network Manager (system-config-network) or in the lsmod command output. I tried to manually add it by doing modprobe b43 command - it then begins to appear in the lsmod, but the option to add the Broadcomm wireless driver during a "New wireless Hardware" is not appearing still. I think, at an abstract level, I need to somehow "tell" the system to add the Broadcomm driver - am just not sure how to do so. On the other hand, the Atheros AR8152 has no driver as of now, so the wired Ethernet is also not connecting. how I can download all the required files on a different machine, and then install it on the Toshiba laptop?
View 7 Replies
View Related
Nov 24, 2010
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
View 2 Replies
View Related
Aug 30, 2010
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
View 2 Replies
View Related
Jun 17, 2011
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
