I burned a copy of the netbook 10.10 edition to a CD and tried to run it on my Acer Extensa 14" laptop to see the new interface. After loading files and about to load the interface nothing happened. I was left with the background and nothing else. What could be the problem? Can't you run it live from a CD as well as USB stick?
View 6 Replies
I'm using the Ubuntu 10.04 Netbook Remix and therefore I have the built-in netbook interface: (pictured)
תצלום מסך-1.jpgIs there any way to remove this and get the standard desktop? because in this one I don't really have a desktop and can't create Shortcuts to specific files and folders.
I can change my Netbook Remix interface to look like desktop edition. I hate this interface but I love the everything-works-OOTB. Plus I was practicing with desktop edition before I got the netbook, so now I'm completely lost using this weird interface.
View 2 Replies View RelatedUnity is too slow and buggy for me right now and I really really loved the old netbook remix interface (I wish they would make that one the default instead of Unity).Anyways, I read somewhere that I can still install it in maverick with a simple package install but I've looked everywhere for it and couldn't find the exact package.
View 1 Replies View RelatedHaving just upgraded to 10.10, I've discovered Unity, and I'm afraid its not for me. I absolutely loved the previous interface, and was quite shocked and saddened to see it disappear. But I'd like to keep all the other new software that comes with 10.10. So my question is, can I install the old 10.04 beautiful interface to run on the 10.10 edition? Re-installation is a MS solution, that turned me on to linux in the first place!
View 9 Replies View RelatedI have noticed that the latest version of SUSE 11.3 is supposed to come with a Netbook addition. During install I did not see this feature. Instead I did the default install with full blown KDE.
View 1 Replies View RelatedI could use some help running fsck. My SDA1 appears to be having issues. I cant get my netbook to load.
I popped in a USB drive with Ubuntu on it so I could try to run fsck on it, but I ran into an issue.
According to Ubuntu, this drive is using the "ext3/ext4" file system. I read an online guide for using fsck and it mentioned that I must designate what file system I am running or it will default to ext2 and corrupt my files. So what command should I run so that fsck knows that I have the ext3/ext4 file system?
Also, could someone check to see if the commands I am running are correct (these are starting from the terminal from the USB drive)?
# init 1
# umount /dev/sda1
# fsck.ext3 /dev/sda1
The third command is where I am confused as to what I should type.
i recently installed ubuntu 10.10 netbook edition on my hp mini netbook. i really dun like the gui. I've tried to switch it to the desktop edition from the login page... still no change... im stuck with the UNE gui..
View 5 Replies View RelatedI have installed the Compiz program and after 30 seconds the main bar disappear...so I restart the computer but when I log in my account ubuntu doesn't load the interface...there's only the desktop..
View 9 Replies View Relatedi bought an ebay usb obd2 interface and i could not get it to work in ubantu netbook i want to use my laptop to use when i fix a car to be able to read the codes well i just installed ubantu i never used linx before but for some reason i got it to install on my laptop i allways used xp but i am sick of the crashing and read that ubantu was very good way to use linux.
View 5 Replies View RelatedI'm reinstalling opensuse 11.3 with KDE. In previous setup I got it working. It is a fresh x64 install. Update all is done. Pacman repo added. code...
View 4 Replies View RelatedI am a newbie to Jaunty, so please forgive my descrip. terminology. I am experiencing a great amount of grief with my Jaunty install. I can no longer get a login screen in Jaunty. When I try to boot normally for this install I get an unclean shutdown screen & it goes into the "checking drive" mode. I uninstalled some applications such as has to do with touchpad, remote desktop, xorg-driver-fglrx etc. I reinstalled xorg-driver-fglrx, which I later found out that I do not need. I have an AMD64 HP system with ATI graphics onboard.
I need to find out how to load graphic user interface in Jaunty. Some of the necessary files have been completely removed by me & I need to reload the repositories and update my current install.The partition is encrypted but I have been able to login with the username & password for THIS encrypted install using the "repair broken system" part of the GRUB screen.
How do I go into the terminal and load repositories, and maybe the kernel so I can do an update/upgrade? I do not know if upgrade is part of what I need to do I wanna keep my Jaunty install so I can access 50G of data that is on this install. I have made no backup of this data!!!
I am able to login to my install using my username & password after I get to the "#" prompt, (option "fix broken system" in GRUB) so I know login can be done under username of install. I just need to know what to TYPE into the terminal to restore the necessary files in the right place to make it run. (Is it called terminal at that point?)
I have a system with 2 hard drives (Ubuntu 10.10 and Windows XP) on them. Grub allows me to select which system to boot to.
Ubuntu 10.10 has stopped working (not loading gnome graphical interface) for some reason.
I can boot to a command line (after many errors on screen). When I try the command "gnome-terminal" I get: "Failed to Parse Arguments: Cannot open display:"
I am having trouble installing Ubuntu 10.10 netbook remix edition onto a Acer Aspire one netbook. I am attempting to install the OS from a 16GB PNY usb drive w/ the usb-universal installer and ubuntu 10.10 netbook remix .ISO
The reoccurring problem that I am encountering is that when I boot from the USB-drive and begin to install everything seems to be working, and then it is stuck at the menu where it asks who are you?; and of course i have filled in everything asked and at the bottom where you can look at what its doing in the terminal/detail section all it says is ready when you are, and the forward tap is unselectable.
Why i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
For the past 2hrs I have been struggling to make KDE launch plasma-dekstop instead of plasma-netbook, but all in vain.I removed, then purged plasma-netbook and plasma-netbook-default-settings packages but after logging out and re-logging in the Netbook UI was back! After restarting the system now I can't even seem to get the KDM. I am greeted with a black screen.--- I restarted the system again and the nasty little bugger is back again! This is so frustrating. How do I get plasma-desktop to load instead?---- Great now I can see that plasma-desktop and plasma-netbook both are running simultaneously! netbook on top of desktop. So my final Q is how do I stop plasma-netbook from loading?
View 9 Replies View Relatedi would like to change my OS to Ubuntu netbook remix, but I already have installed Kubuntu netbook package.
Is there any easy way to make switch from Kubuntu to Ubuntu? Without need to delete all my data?
I installed Ubuntu Netbook 10.04 and immediately noticed the keyboard of my eeepc 1000HE was abnormally warm. Since I dual boot XP I booted to XP and found the fan running faster to compensate for the previous heat. This did not happen on Ubuntu-the fan just was barely running. I had to place the side of the netbook in order to feel the fan running. I issued "sensors" in terminal and it showed 67 degrees C for the cpu temp. Is the latest Ubuntu such a resource hug that it heats up the CPU?
View 9 Replies View Relatedmy play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?
View 14 Replies View RelatedI just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
View 2 Replies View RelatedI have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
i am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.
When I do...# iptables -L...I see rules in my INPUT and OUTPUT chains that look scary:ACCEPT all -- anywhere anywhere...but these rules only apply to the loopback interface. I tested it and the server cannot be reached on open ports from the outside world. How can I make iptables show the interfaces that the rules apply to?Otherwise, every time I do iptables -L it will scare the crap out of me.
View 3 Replies View RelatedI found multiple sites explaining how to add IPs to a network interface as virtual interface like eth0:0. However I can add IPs to an interface as well using the ip command: ip a a 192.168.2.2/24 dev eth0 What I want to know is how I can make this persistent on rhel/centos.
View 2 Replies View RelatedWhen i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
Im a new linux user and so far im loving it, problem is i just tried installing Ubuntu 10.04 netbook remix onto my Compaq mini 311 (via usb) and at first i couldnt even install from the flash stick...finally managed to by formatting the flash with an HP tool and then creating the bootable Live OS with "Linux Live USB creator 2.6."
I selected to use the whole Hard disk to install (the hard disk was empty anyway as i recently formated the drive which had windows 7 on it)
The the installation completed successfully but the problem is that after rebooting the OS wouldnt boot, leaving me with a flashing cursor or _ on the top left of the screen...
I have tried everything i could think of, using different Usb creators, formatting the hard drive before re-installing but for some reason im still left with the same blinking cursor after every install.
I have just installed the regular version of ubuntu 9.04 which works perfectly after installing but id much rather use the netbook version of 10.04
(I assume the issue has something to do with the bootloader but im completely new to the topic so cant really troubleshoot)
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I noticed my Firefox loading rather slow (took around 5 - 7 seconds to load and navigate pages, even google, and it would sometimes become unresponsive), I thought it may have been a addon problem, so I opened up a new Firefox profile with no addons but the browser crashed upon loading the certain page I was trying to view, and I figured I'd look into it later and use Chromium for a while (I'll be open, I was trying to watch an pron tube site, and when your, you know, you don't really feel like stopping to go technical and try to fix it or whatever), but Chromium said that the flash player wasn't installed. I thought it was kinda odd, but then again I didn't want to go technical and thought maybe since mozilla firefoxs engine loaded the flash, I'd use Mozilla Seamonkey which uses the same gecko engine. The flash wasn't working either on there.
I tried looking up to see if there was a 64bit deb package for flash, but they didn't have it, and I seen someone mention that doing the 'apt-get upgrade' upgrades it, so I did that, and it also said it installed some extra packages when doing it, but I figured it was just that getlibs grabbing the extra dependencies and went along with installing them (after all there shouldnt be much to lose since its from the repository, right?)
I restarted the computer to give the updates a chance to take effect (it didn't mention to restart, but I thought I'd go ahead and do it anyways to ensure it updated okay).
This is where the booting problem comes in: When my laptop restarted, the loading was going across very slowly (I have ubuntu studio installed through regular ubuntu, so it was showing the text filling up), normally it would just fill a little bit of the first "U" in "Ubuntu Studio" and then be done quickly, but now it goes slowly all the way, and when it fills "Ubuntu Studio", it stills stays there, it doesn't load on.
I pressed the down button to see the terminal and it says this:
Code:
I have no clue what to do now, and I wanted to ask for help before I go trying myself editing the command line boot process.
